DSDP 5.8 21.fc30 1150872 Unspecified Software for semidefinite programming
DSDP is a free open source implementation of an interior-point method
for semidefinite programming. It provides primal and dual solutions,
exploits low-rank structure and sparsity in the data, and has relatively
low memory requirements for an interior-point method. It allows
feasible and infeasible starting points and provides approximate
certificates of infeasibility when no feasible solution exists. The
dual-scaling algorithm implemented in this package has a convergence
proof and worst-case polynomial complexity under mild assumptions on the
data. The software can be used as a set of subroutines, through Matlab,
or by reading and writing to data files. Furthermore, the solver offers
scalable parallel performance for large problems and a well documented
interface. Some of the most popular applications of semidefinite
programming and linear matrix inequalities (LMI) are model control,
truss topology design, and semidefinite relaxations of combinatorial and
global optimization problems.
DSDP 5.8 21.fc30 1101936 Unspecified Software for semidefinite programming
DSDP is a free open source implementation of an interior-point method
for semidefinite programming. It provides primal and dual solutions,
exploits low-rank structure and sparsity in the data, and has relatively
low memory requirements for an interior-point method. It allows
feasible and infeasible starting points and provides approximate
certificates of infeasibility when no feasible solution exists. The
dual-scaling algorithm implemented in this package has a convergence
proof and worst-case polynomial complexity under mild assumptions on the
data. The software can be used as a set of subroutines, through Matlab,
or by reading and writing to data files. Furthermore, the solver offers
scalable parallel performance for large problems and a well documented
interface. Some of the most popular applications of semidefinite
programming and linear matrix inequalities (LMI) are model control,
truss topology design, and semidefinite relaxations of combinatorial and
global optimization problems.
DSDP-devel 5.8 21.fc30 8240238 Unspecified Headers and libraries for developing with DSDP
Headers and libraries for developing with DSDP.
DSDP-devel 5.8 21.fc30 8240238 Unspecified Headers and libraries for developing with DSDP
Headers and libraries for developing with DSDP.
DSDP-examples 5.8 21.fc30 142012 Unspecified Example programs that use DSDP
Examples programs that use the DSDP library.
DecodeIR 2.45 12.fc30 200725 Unspecified Infrared remote controls decoding library
DecodeIR is a general library which can decode signals for a large number
of infrared remote controls. It can be used as a regular C library or
through a java interface. Being a JNI library, it does not support multi-arch
installations.
DecodeIR 2.45 12.fc30 197917 Unspecified Infrared remote controls decoding library
DecodeIR is a general library which can decode signals for a large number
of infrared remote controls. It can be used as a regular C library or
through a java interface. Being a JNI library, it does not support multi-arch
installations.
DecodeIR-devel 2.45 12.fc30 13053 Unspecified Development files for DecodeIR
The DecodeIR-devel package contains libraries and header files for
developing applications that use DecodeIR.
DecodeIR-devel 2.45 12.fc30 13053 Unspecified Development files for DecodeIR
The DecodeIR-devel package contains libraries and header files for
developing applications that use DecodeIR.
DecodeIR-javadoc 2.45 12.fc30 93215 Unspecified Javadoc for DecodeIR
Javadoc API documentation for DecodeIR.
DevIL 1.7.8 30.fc30 922590 Unspecified A cross-platform image library
Developer's Image Library (DevIL) is a programmer's library to develop
applications with very powerful image loading capabilities, yet is easy for a
developer to learn and use. Ultimate control of images is left to the
developer, so unnecessary conversions, etc. are not performed. DevIL utilizes
a simple, yet powerful, syntax. DevIL can load, save, convert, manipulate,
filter and display a wide variety of image formats.
DevIL 1.7.8 30.fc30 886462 Unspecified A cross-platform image library
Developer's Image Library (DevIL) is a programmer's library to develop
applications with very powerful image loading capabilities, yet is easy for a
developer to learn and use. Ultimate control of images is left to the
developer, so unnecessary conversions, etc. are not performed. DevIL utilizes
a simple, yet powerful, syntax. DevIL can load, save, convert, manipulate,
filter and display a wide variety of image formats.
DevIL-ILUT 1.7.8 30.fc30 55408 Unspecified The libILUT component of DevIL
The libILUT component of DevIL
DevIL-ILUT 1.7.8 30.fc30 56552 Unspecified The libILUT component of DevIL
The libILUT component of DevIL
DevIL-ILUT-devel 1.7.8 30.fc30 31102 Unspecified Development files for the libILUT component of DevIL
Development files for the libILUT component of DevIL
DevIL-ILUT-devel 1.7.8 30.fc30 31104 Unspecified Development files for the libILUT component of DevIL
Development files for the libILUT component of DevIL
DevIL-devel 1.7.8 30.fc30 53095 Unspecified Development files for DevIL
Development files for DevIL
DevIL-devel 1.7.8 30.fc30 53099 Unspecified Development files for DevIL
Development files for DevIL
DiffusionKurtosisFit 0.1.1 10.fc29 1009133 Unspecified Code to reconstruct the Diffusion Kurtosis Tensor from Diffusion Weighted MRI
Code to reconstruct the Diffusion Kurtosis Tensor from Diffusion Weighted MRI.
DivFix++ 0.34 28.fc30 601197 Unspecified Repair broken AVI file streams by rebuilding index part of file
This program designed to repair broken AVI file streams by
rebuilding index part of file. This is very useful when trying
to preview movies which has no index part, like some files are
currently downloading from ed2k or bittorent networks.
DivFix++ has supports CLI tools, this means you can fix, preview
and delete movies automatically via script (by using argument
parameters...)
DivFix++ program code supports lots of operating system, because
it's writen by cross-platform API, wxWidgets.
d-din-condensed-fonts 1.0 4.fc30 149455 Unspecified Datto D-DIN condensed fonts
D-DIN is a sans-serif typeface family derived from German DIN
(Deutsches Institut fuer Normung / German Institute for Standardization)
font style.
This font was commissioned by Datto, Inc. from Monotype and is used for
the company's primary corporate typography.
This package provides the condensed fonts variant.
d-din-exp-fonts 1.0 4.fc30 209966 Unspecified Datto D-DIN expanded fonts
D-DIN is a sans-serif typeface family derived from German DIN
(Deutsches Institut fuer Normung / German Institute for Standardization)
font style.
This font was commissioned by Datto, Inc. from Monotype and is used for
the company's primary corporate typography.
This package provides the expanded fonts variant.
d-din-fonts 1.0 4.fc30 215883 Unspecified Datto D-DIN fonts
D-DIN is a sans-serif typeface family derived from German DIN
(Deutsches Institut fuer Normung / German Institute for Standardization)
font style.
This font was commissioned by Datto, Inc. from Monotype and is used for
the company's primary corporate typography.
d-feet 0.3.14 3.fc30 513812 Unspecified A powerful D-Bus Debugger
D-Feet is an easy to use D-Bus debugger.
D-Bus is an RPC library used on the Desktop. D-Feet can be used to inspect
D-Bus objects of running programs and invoke methods on those objects.
d52 3.4.1 13.fc30 484902 Unspecified Disassemblers for 8051, 8048, and Z80 families
D52 is collection of disassemblers for the 8051, 8048, and Z80
families of microcontrollers and microprocessors.
dSFMT 2.2.3 12.fc30 35827 Unspecified Double precision SIMD-oriented Fast Mersenne Twister
The purpose of dSFMT is to speed up the generation by avoiding
the expensive conversion of integer to double (floating point).
dSFMT directly generates double precision floating point
pseudo-random numbers which have the IEEE Standard for Binary
Floating-Point Arithmetic (ANSI/IEEE Std 754-1985) format.
dSFMT is only available on the CPUs which use IEEE 754 format
double precision floating point numbers.
dSFMT doesn't support integer outputs.
dSFMT supports the output of double precision floating point
pseudo-random numbers which distribute in the range of
[1, 2), [0, 1), (0, 1] and (0, 1).
And it also supports the various periods form 2607-1 to 2132049-1.
dSFMT 2.2.3 12.fc30 32655 Unspecified Double precision SIMD-oriented Fast Mersenne Twister
The purpose of dSFMT is to speed up the generation by avoiding
the expensive conversion of integer to double (floating point).
dSFMT directly generates double precision floating point
pseudo-random numbers which have the IEEE Standard for Binary
Floating-Point Arithmetic (ANSI/IEEE Std 754-1985) format.
dSFMT is only available on the CPUs which use IEEE 754 format
double precision floating point numbers.
dSFMT doesn't support integer outputs.
dSFMT supports the output of double precision floating point
pseudo-random numbers which distribute in the range of
[1, 2), [0, 1), (0, 1] and (0, 1).
And it also supports the various periods form 2607-1 to 2132049-1.
dSFMT-devel 2.2.3 12.fc30 28035 Unspecified Development files for dSFMT
The dSFMT-devel package contains libraries and header files for
developing applications that use dSFMT.
dSFMT-devel 2.2.3 12.fc30 28035 Unspecified Development files for dSFMT
The dSFMT-devel package contains libraries and header files for
developing applications that use dSFMT.
dSFMT-devel-doc 2.2.3 12.fc30 449563 Unspecified Development documentation files for dSFMT
The dSFMT-devel-doc package contains API documentation for
developing applications that use dSFMT.
daa2iso 0.1.7e 16.fc30 70118 Unspecified Program for converting DAA files to ISO
DAA2ISO is an open source command-line/GUI tool for converting single and
multipart DAA images to the original ISO format.
The DAA image (Direct Access Archive) in fact is just a compressed
CD/DVD ISO which can be created through the commercial program
PowerISO.
daala-devel 0 12.20170616git7278368.fc30 836055 Unspecified Development files for the Daala video codec libraries
The daala-devel package contains libraries and header files for developing
applications that use daala.
daala-devel 0 12.20170616git7278368.fc30 836059 Unspecified Development files for the Daala video codec libraries
The daala-devel package contains libraries and header files for developing
applications that use daala.
daala-libs 0 12.20170616git7278368.fc30 467115 Unspecified Daala video codec libraries
A new video compression technology. The goal of the project is to provide a
video format that's free to implement, use and distribute, and a reference
implementation with technical performance superior to H.265.
daala-libs 0 12.20170616git7278368.fc30 557755 Unspecified Daala video codec libraries
A new video compression technology. The goal of the project is to provide a
video format that's free to implement, use and distribute, and a reference
implementation with technical performance superior to H.265.
daala-tools 0 12.20170616git7278368.fc30 1890304 Unspecified Daala video codec tools
A new video compression technology. The goal of the project is to provide a
video format that's free to implement, use and distribute, and a reference
implementation with technical performance superior to H.265.
The daala-tools package contains a test player and encoder plus programs for
testing daala support in your applications.
daemonize 1.7.7 8.fc30 41823 Unspecified Run a command as a Unix daemon
daemonize runs a command as a Unix daemon. As defined in W. Richard Stevens'
1990 book, Unix Network Programming (Addison-Wesley, 1990), a daemon is "a
process that executes 'in the background' (i.e., without an associated
terminal or login shell) either waiting for some event to occur, or waiting
to perform some specified task on a periodic basis." Upon startup, a typical
daemon program will:
- Close all open file descriptors (especially standard input, standard output
and standard error)
- Change its working directory to the root filesystem, to ensure that it
doesn’t tie up another filesystem and prevent it from being unmounted
- Reset its umask value
- Run in the background (i.e., fork)
- Disassociate from its process group (usually a shell), to insulate itself
from signals (such as HUP) sent to the process group
- Ignore all terminal I/O signals
- Disassociate from the control terminal (and take steps not to reacquire one)
- Handle any SIGCLD signals
Most programs that are designed to be run as daemons do that work for
themselves. However, you’ll occasionally run across one that does not.
When you must run a daemon program that does not properly make itself into a
true Unix daemon, you can use daemonize to force it to run as a true daemon.
dagger 1.2.2 10.fc30 83198 Unspecified A fast dependency injector for Android and Java
A fast dependency injector for Android and Java.
For more information please see the website.
dagger-compiler 1.2.2 10.fc30 84805 Unspecified Dagger Compiler
Tools to generate Dagger injection and
module adapters from annotated code and
validate them.
dagger-javadoc 1.2.2 10.fc30 1127116 Unspecified Javadoc for dagger
This package contains javadoc for dagger.
daggy 1.0.1 1.fc30 842065 Unspecified Data Aggregation Utility
Daggy - application that can run multiple commands
on remote servers simultaneously and save output locally.
* Simple to use.
Configure commands and servers via json/yaml config.
Run command via ssh/bash/powershell
* Simple to support.
No installations are required on remote servers.
Only ssh connection are required for remote servers.
* Simple to search and read.
Each command output saving in separate file at runtime.
dahdi-tools 2.11.1 12.fc30 1245047 Unspecified Userspace tools to configure the DAHDI kernel modules
DAHDI stands for Digium Asterisk Hardware Device Interface. This
package contains the userspace tools to configure the DAHDI kernel
modules. DAHDI is the replacement for Zaptel, which must be renamed
due to trademark issues.
dahdi-tools-devel 2.11.1 12.fc30 124693 Unspecified Development files for DAHDI
The dahdi-devel package contains libraries and header files for
developing applications that use DAHDI hardware.
dahdi-tools-devel 2.11.1 12.fc30 124693 Unspecified Development files for DAHDI
The dahdi-devel package contains libraries and header files for
developing applications that use DAHDI hardware.
dahdi-tools-libs 2.11.1 12.fc30 265047 Unspecified Library files for DAHDI
The dahdi-tools-libs package contains libraries for accessing DAHDI hardware.
dahdi-tools-libs 2.11.1 12.fc30 265747 Unspecified Library files for DAHDI
The dahdi-tools-libs package contains libraries for accessing DAHDI hardware.
dain-snappy 0.4 7.fc30 92918 Unspecified Snappy compression library
This is a rewrite (port) of Snappy writen in pure Java. This
compression code produces a byte-for-byte exact copy of the output
created by the original C++ code, and extremely fast.
dain-snappy-javadoc 0.4 7.fc30 298411 Unspecified API documentation for dain-snappy
API documentation for dain-snappy.
dancer2 0.207000 2.fc30 26619 Unspecified Dancer2 command line interface
Dancer2 is the new generation lightweight web-framework for Perl. This tool
provides nice, easily-extendable CLI interface for it.
danmaq 0.2.3.1 5.fc30 263913 Unspecified A small client side Qt program to play danmaku on any screen
DanmaQ is a small client side Qt program to play danmaku on any screen.
dans-gdal-scripts 0.24 7.fc30 1586048 Unspecified Utilities for use in conjunction with GDAL
Dan Stahlke's GDAL contributed tools are a collection of
useful programs to perform common raster operations.
dapl 2.1.9 9.fc30 1660589 Unspecified Library providing access to the DAT 2.0 API
Along with the RDMA kernel drivers, libdat and libdapl provide
a user-space RDMA API that supports DAT 2.0 specification and IB
transport extensions for atomic operations and RDMA write with
immediate data.
dapl 2.1.9 9.fc30 1623345 Unspecified Library providing access to the DAT 2.0 API
Along with the RDMA kernel drivers, libdat and libdapl provide
a user-space RDMA API that supports DAT 2.0 specification and IB
transport extensions for atomic operations and RDMA write with
immediate data.
dapl-devel 2.1.9 9.fc30 191669 Unspecified Development files for the libdat and libdapl libraries
Header files for libdat and libdapl libraries.
dapl-devel 2.1.9 9.fc30 191669 Unspecified Development files for the libdat and libdapl libraries
Header files for libdat and libdapl libraries.
dapl-static 2.1.9 9.fc30 2907866 Unspecified Static libdat and libdapl libraries
Static versions of the libdat and libdapl libraries.
dapl-static 2.1.9 9.fc30 3632276 Unspecified Static libdat and libdapl libraries
Static versions of the libdat and libdapl libraries.
dapl-utils 2.1.9 9.fc30 457283 Unspecified Test suites for dapl libraries
Useful test suites to validate the dapl library APIs and operation.
daq 2.0.6 7.fc30 237294 Unspecified Data Acquisition Library
Snort 2.9 introduces the DAQ, or Data Acquisition library, for packet I/O. The
DAQ replaces direct calls to libpcap functions with an abstraction layer that
facilitates operation on a variety of hardware and software interfaces without
requiring changes to Snort.
daq 2.0.6 7.fc30 235730 Unspecified Data Acquisition Library
Snort 2.9 introduces the DAQ, or Data Acquisition library, for packet I/O. The
DAQ replaces direct calls to libpcap functions with an abstraction layer that
facilitates operation on a variety of hardware and software interfaces without
requiring changes to Snort.
daq-devel 2.0.6 7.fc30 58311 Unspecified Development libraries and headers for daq
Development libraries and headers for daq.
daq-devel 2.0.6 7.fc30 58315 Unspecified Development libraries and headers for daq
Development libraries and headers for daq.
daq-modules 2.0.6 7.fc30 128927 Unspecified Dynamic DAQ modules
Dynamic DAQ modules.
dar 2.6.3 1.fc30 3551458 Unspecified Software for making/restoring incremental CD/DVD backups
DAR is a command line tool to backup a directory tree and files. DAR is
able to make differential backups, split them over a set of disks or files
of a given size, use compression, filter files or subtrees to be saved or
not saved, directly access and restore given files. DAR is also able
to handle extented attributes, and can make remote backups through an
ssh session for example. Finally, DAR handles save and restore of hard
and symbolic links.
darcs 2.14.1 20.fc30 49777922 Unspecified Distributed Advanced Revision Control System
Darcs is a distributed, interactive, smart revision control system.
Darcs is easy to learn and efficient to use because it asks you questions
in response to simple commands, giving you choices in your workflow.
You can choose to record one change in a file, while ignoring another.
You can review each patch as you update from upstream.
Originally developed by physicist David Roundy,
darcs is based on a unique algebra of patches.
darkclient 0.2 13.fc29 4621 Applications/System A command line tool for the darkserver service
A command line tool which produces machine parse-able output from darkroom
service of GNU Buildids.
darkgarden-fonts 1.1 25.fc30 84024 Unspecified Dark Garden is a decorative outline font of unusual shape
Dark Garden is a decorative outline font of unusual shape.
The typeface is based on author's original hand drawings.
The letterform is complex, with all characters decorated
with spikes resembling thorns or flames, character spacing
is very dense. Such a theme makes it a great font for titles,
banners, logos etc. Due to the font's complicated form,
long text passages are not very legible, but short paragraphs
such as titles or lyrics / poetry look very well.
darkhttpd 1.12 8.fc30 54729 Unspecified A secure, lightweight, fast, single-threaded HTTP/1.1 server
darkhttpd is a secure, lightweight, fast and single-threaded HTTP/1.1 server.
Features:
* Simple to set up:
* Single binary, no other files.
* Standalone, doesn't need inetd or ucspi-tcp.
* No messing around with config files.
* Written in C - efficient and portable.
* Small memory footprint.
* Event loop, single threaded - no fork() or pthreads.
* Generates directory listings.
* Supports HTTP GET and HEAD requests.
* Supports Range / partial content.
* Supports If-Modified-Since.
* Supports Keep-Alive connections.
* Can serve 301 redirects based on Host header.
* Uses sendfile().
Security:
* Can log accesses, including Referer and User-Agent.
* Can chroot.
* Can drop privileges.
* Impervious to /../ sniffing.
* Times out idle connections.
* Drops overly long requests.
Limitations:
* This server only serves static content - *NO* CGI supported!
darkplaces 20170401 8.fc30 7423974 Unspecified Modified Quake engine
DarkPlaces is a modified Quake engine.
darkplaces-quake 20170401 8.fc30 2885 Unspecified Multiplayer, deathmatch oriented first person shooter
Rage through levels of sheer terror and fully immersive sound and
lighting. Arm yourself against the cannibalistic Ogre, fiendish Vore
and indestructible Schambler using letal nails, fierce Thunderbolts
and abominable Rocket and Grenade Launchers.
darkplaces-quake-server 20170401 8.fc30 169176 Unspecified Dedicated DarkPlaces Quake server
DarkPlaces server required for hosting multiplayer network Quake games.
darkplaces-server 20170401 8.fc30 3452973 Unspecified Quake engine server
DarkPlaces Quake engine server.
darkserver 2.0 5.fc29 12777 Applications/Publishing GNU build-id service
Service to provide details of GNU build-id. This is a Django based web-service
which keeps records of GNU build-ids of various ELF files imported from RPMs
and provide them in JSON format through web.
darkserver-importer 2.0 5.fc29 24288 Applications/Publishing The importer system for darkserver
Importer commands
darkstat 3.0.719 8.fc30 146696 Unspecified Network traffic analyzer
darkstat is a network traffic analyzer. It's basically a packet sniffer
which runs as a background process on a cable/DSL router and gathers
all sorts of useless but interesting statistics.
darktable 2.6.1 1.fc30 17292806 Unspecified Utility to organize and develop raw images
Darktable is a virtual light-table and darkroom for photographers:
it manages your digital negatives in a database and lets you view them
through a zoom-able light-table.
It also enables you to develop raw images and enhance them.
darktable-tools-noise 2.6.1 1.fc30 58627 Unspecified The noise profiling tools to support new cameras
darktable is a virtual lighttable and darkroom for photographers: it manages
your digital negatives in a database and lets you view them through a zoomable
lighttable. it also enables you to develop raw images and enhance them.
dash 0.5.10.2 2.fc30 234710 Unspecified Small and fast POSIX-compliant shell
DASH is a POSIX-compliant implementation of /bin/sh that aims to be as small as
possible. It does this without sacrificing speed where possible. In fact, it is
significantly faster than bash (the GNU Bourne-Again SHell) for most tasks.
dasher 5.0.0 0.10.beta.fc30 31759617 Unspecified A predictive text input system
Dasher is an information-efficient text-entry interface, driven by natural
continuous pointing gestures. Dasher is a competitive text-entry system
wherever a full-size keyboard cannot be used, e.g. when operating a computer
one-handed, by joystick, touchscreen, trackball, or mouse, when operating
a computer without hands (i.e. by head-mouse or by eyetracker), or on
palmtops or wearable computers.
datagrepper 0.9.5 3.fc30 851445 Unspecified A webapp to query fedmsg history
A webapp to retrieve historical information about messages on the fedmsg
bus. It is a JSON api for the datanommer message store.
datalog 2.6 11.fc30 218641 Unspecified A Lightweight Deductive Database using Datalog
This package contains a lightweight deductive database system.
Queries and database updates are expressed using Datalog--a
declarative logic language in which each formula is a function-free
Horn clause, and every variable in the head of a clause must appear in
the body of the clause. The use of Datalog syntax and an
implementation based on tabling intermediate results, ensures that all
queries terminate.
The components in this package are designed to be small, and usable on
memory constrained devices. The package includes an interactive
interpreter for Datalog, and the development package has a library
that can be used to embed the interpreter into C programs.
datalog 2.6 11.fc30 220361 Unspecified A Lightweight Deductive Database using Datalog
This package contains a lightweight deductive database system.
Queries and database updates are expressed using Datalog--a
declarative logic language in which each formula is a function-free
Horn clause, and every variable in the head of a clause must appear in
the body of the clause. The use of Datalog syntax and an
implementation based on tabling intermediate results, ensures that all
queries terminate.
The components in this package are designed to be small, and usable on
memory constrained devices. The package includes an interactive
interpreter for Datalog, and the development package has a library
that can be used to embed the interpreter into C programs.
datalog-devel 2.6 11.fc30 9302 Unspecified Datalog header file and library
This package includes the header file and library that can be used to
embed a datalog interpreter into C programs.
datalog-devel 2.6 11.fc30 9302 Unspecified Datalog header file and library
This package includes the header file and library that can be used to
embed a datalog interpreter into C programs.
datamash 1.3 3.fc30 2563059 Unspecified A statistical, numerical and textual operations tool
GNU datamash is a command-line program which performs basic
numeric,textual and statistical operations on input textual data
files.
datanommer 0.2.0 15.fc30 38348 Unspecified A storage consumer for the Fedora Message Bus (fedmsg)
This is datanommer. It is comprised of only a fedmsg consumer that
stuffs every message in a sqlalchemy database.
There are also a handful of CLI tools to dump information from the
database.
datanommer-commands 0.7.2 4.fc30 62102 Unspecified Console commands for datanommer
Console commands for datanommer.
datanommer-config 0.9.1 6.fc30 64965 Unspecified Config files for datanommer
Config files for datanommer.
datanucleus-api-jdo 3.2.8 8.fc30 366607 Unspecified DataNucleus JDO API plugin
Plugin providing DataNucleus implementation of JDO API.
datanucleus-api-jdo-javadoc 3.2.8 8.fc30 5764736 Unspecified Javadoc for datanucleus-api-jdo
This package contains javadoc for datanucleus-api-jdo.
datanucleus-core 3.2.15 9.fc30 1830359 Unspecified DataNucleus Core
DataNucleus Core provides the primary components
of a heterogeneous Java persistence solution.
It supports persistence API's being layered on
top of the core functionality.
datanucleus-core-javadoc 3.2.15 9.fc30 37537708 Unspecified Javadoc for datanucleus-core
This package contains javadoc for datanucleus-core.
datanucleus-maven-parent 3.3 9.fc30 21402 Unspecified DataNucleus Maven parent project
Datanucleus Maven parent pom used by other datanucleus packages.
datanucleus-rdbms 3.2.13 9.fc30 1817735 Unspecified DataNucleus RDBMS
Plugin for DataNucleus providing persistence to RDBMS data-stores.
datanucleus-rdbms-javadoc 3.2.13 9.fc30 32026321 Unspecified Javadoc for datanucleus-rdbms
This package contains javadoc for datanucleus-rdbms.
dataquay 0.9 17.fc29 656181 Unspecified Simple RDF for C++ and Qt applications
Dataquay is a free open source library that provides a friendly C++
interface to an RDF datastore using Qt4 classes and
containers. Supported datastores are the popular and feature-complete
Redland and the lightweight Sord.
Dataquay is simple to use and easy to integrate. It is principally
aimed at Qt-based applications that would like to use an RDF datastore
as backing for in-memory project data, to avoid having to invent file
formats or XML schemas and to make it easy to augment the data with
descriptive metadata pulled in from external sources. It's also useful
for applications with ad-hoc needs for metadata management using RDF
sources.
Dataquay does not use a separate database, instead using in-memory
storage with separate file import and export facilities. Although it
offers a choice of datastore implementations, the choice is made at
compile time: there is no runtime module system to take into account
when deploying your application.
The Fedora package is configured to use Redland, as recommended by the
developers for general use.
dataquay 0.9 17.fc29 649293 Unspecified Simple RDF for C++ and Qt applications
Dataquay is a free open source library that provides a friendly C++
interface to an RDF datastore using Qt4 classes and
containers. Supported datastores are the popular and feature-complete
Redland and the lightweight Sord.
Dataquay is simple to use and easy to integrate. It is principally
aimed at Qt-based applications that would like to use an RDF datastore
as backing for in-memory project data, to avoid having to invent file
formats or XML schemas and to make it easy to augment the data with
descriptive metadata pulled in from external sources. It's also useful
for applications with ad-hoc needs for metadata management using RDF
sources.
Dataquay does not use a separate database, instead using in-memory
storage with separate file import and export facilities. Although it
offers a choice of datastore implementations, the choice is made at
compile time: there is no runtime module system to take into account
when deploying your application.
The Fedora package is configured to use Redland, as recommended by the
developers for general use.
dataquay-devel 0.9 17.fc29 159756 Unspecified Development files for dataquay
The dataquay-devel package contains libraries and header files for
developing applications that use dataquay.
dataquay-devel 0.9 17.fc29 159758 Unspecified Development files for dataquay
The dataquay-devel package contains libraries and header files for
developing applications that use dataquay.
dateformat 1.2.3 11.fc30 5086 Unspecified A simple way to format dates and times according to a user-specified mask
A simple way to format dates and times according to a user-specified mask.
* Accepts a date, a mask, or a date and a mask.
* Returns a formatted version of the given date.
* The date defaults to the current date/time.
datefudge 1.22 4.fc30 38423 Unspecified Fake the system date
This program (and preload library) fakes the system date so that
programs think the wall clock is ... different. The faking is not
complete; time-stamp on files are not affected in any way. This
package is useful if you want to test the date handling of your
programs without changing the system clock.
dateshift 1.1 21.fc30 54456 Unspecified A date/time test tool
Dateshift is a tool for shifting date/time. In particular it allows
a process or set of process to run with a different clock setting,
without having to change the system clock.
This is useful because changing the system clock requires root privilege
and is inconvenient on shared machines.
dateshift 1.1 21.fc30 56172 Unspecified A date/time test tool
Dateshift is a tool for shifting date/time. In particular it allows
a process or set of process to run with a different clock setting,
without having to change the system clock.
This is useful because changing the system clock requires root privilege
and is inconvenient on shared machines.
dateshift-devel 1.1 21.fc30 0 Unspecified Development files for dateshift
The dateshift-devel package contains libraries and header files for
developing applications that use dateshift.
dateshift-devel 1.1 21.fc30 0 Unspecified Development files for dateshift
The dateshift-devel package contains libraries and header files for
developing applications that use dateshift.
dateutils 0.4.5 2.fc30 2085971 Unspecified Command-line date and time calculation, conversion, and comparison
Tools which revolve around fiddling with dates and times on the command
line, with a strong focus on use cases that arise when dealing with large
amounts of financial data.
datovka 4.12.0 1.fc30 5363859 Unspecified A free graphical interface for Czech Databox (Datové schránky)
GUI application allowing access to Czech Databox - an electronic communication
interface endorsed by the Czech government.
dav1d 0.2.1 3.fc30 66903 Unspecified AV1 cross-platform Decoder
dav1d is a new AV1 cross-platform Decoder, open-source, and focused on speed
and correctness.
davfs2 1.5.4 9.fc30 385792 Unspecified A filesystem driver for WebDAV
davfs2 is a Linux file system driver that allows you to mount a WebDAV server
as a disk drive.
davix 0.7.2 2.fc30 3241394 Unspecified Toolkit for Http-based file management
Davix is a toolkit designed for file operations
with Http based protocols (WebDav, Amazon S3, ...).
Davix provides an API and a set of command line tools.
davix-devel 0.7.2 2.fc30 127456 Unspecified Development files for davix
Development files for davix. Davix is a toolkit designed for file operations
with Http based protocols (WebDav, Amazon S3, ...).
davix-devel 0.7.2 2.fc30 127460 Unspecified Development files for davix
Development files for davix. Davix is a toolkit designed for file operations
with Http based protocols (WebDav, Amazon S3, ...).
davix-doc 0.7.2 2.fc30 1223536 Unspecified Documentation for davix
Documentation and examples for davix. Davix is a toolkit designed
for file operations with Http based protocols (WebDav, Amazon S3, ...).
davix-libs 0.7.2 2.fc30 1759082 Unspecified Development files for davix
Libraries for davix. Davix is a toolkit designed for file operations
with Http based protocols (WebDav, Amazon S3, ...).
davix-libs 0.7.2 2.fc30 1712302 Unspecified Development files for davix
Libraries for davix. Davix is a toolkit designed for file operations
with Http based protocols (WebDav, Amazon S3, ...).
daxctl 64.1 1.fc30 117571 Unspecified Manage Device-DAX instances
The daxctl utility provides enumeration and provisioning commands for
the Linux kernel Device-DAX facility. This facility enables DAX mappings
of performance / feature differentiated memory without need of a
filesystem.
daxctl-devel 64.1 1.fc30 29964 Unspecified Development files for libdaxctl
The ndctl-devel package contains libraries and header files for
developing applications that use ndctl, a library for enumerating
"Device DAX" devices. Device DAX is a facility for establishing DAX
mappings of performance / feature-differentiated memory.
daxctl-devel 64.1 1.fc30 29966 Unspecified Development files for libdaxctl
The ndctl-devel package contains libraries and header files for
developing applications that use ndctl, a library for enumerating
"Device DAX" devices. Device DAX is a facility for establishing DAX
mappings of performance / feature-differentiated memory.
daxctl-libs 64.1 1.fc30 87939 Unspecified Management library for "Device DAX" devices
Device DAX is a facility for establishing DAX mappings of performance /
feature-differentiated memory. daxctl-libs provides an enumeration /
control API for these devices.
daxctl-libs 64.1 1.fc30 89643 Unspecified Management library for "Device DAX" devices
Device DAX is a facility for establishing DAX mappings of performance /
feature-differentiated memory. daxctl-libs provides an enumeration /
control API for these devices.
daxio 1.6 1.fc30 321366 Unspecified Perform I/O on Device DAX devices or zero a Device DAX device
The daxio utility performs I/O on Device DAX devices or zero
a Device DAX device. Since the standard I/O APIs (read/write) cannot be used
with Device DAX, data transfer is performed on a memory-mapped device.
The daxio may be used to dump Device DAX data to a file, restore data from
a backup copy, move/copy data to another device or to erase data from
a device.
dayjournal 23.0.6 7.fc30 285285 Unspecified Digital journal that uses plain text files
DayJournal is a minimalist digital journal that lets the content you
create outlast DayJournal itself.
* Future proofs your journal entries by saving them as plain text and
organizing them as you go. This means you can read or create entries
when you don’t have DayJournal.
* Automatically saves as you write.
* Easily sync journals with cloud storage services because you choose
where your journal folder is.
* Add pictures to your journal entries.
* Manage multiple journals.
* Keyboard shortcuts make it easy to navigate through entries.
* Create a journal archive file, an HTML page that looks great when
printed so you can keep a physical journal too.
* Add to your journal from anywhere with Blip Journal for
Android. DayJournal can automatically import entries synced to Dropbox
from Blip Journal. On iOS? Now DayJournal can automatically import
entries synced to Dropbox from the Day One app as well.
Simply put, DayJournal is the simple digital journal that finally does
it right.
dayplanner 0.11 10.fc30 758698 Unspecified An easy and clean Day Planner
Day Planner is a simple time management program.
Day Planner is designed to help you easily manage your time.
It can manage appointments, birthdays and more. It makes sure you
remember your appointments by popping up a dialog box reminding you about it.
dbench 4.0 19.fc30 26411671 Unspecified Filesystem load benchmarking tool
Dbench is a file system benchmark that generates load patterns similar
to those of the commercial Netbench benchmark, but without requiring a
lab of Windows load generators to run. It is now considered a de facto
standard for generating load on the Linux VFS.
dbh 5.0.16 9.fc30 128778 Unspecified Disk based hash library
Disk based hashes is a method to create multidimensional binary trees on disk.
This library permits the extension of database concept to a plethora of
electronic data, such as graphic information. With the multidimensional binary
tree it is possible to mathematically prove that access time to any
particular record is minimized (using the concept of critical points from
calculus), which provides the means to construct optimized databases for
particular applications.
dbh 5.0.16 9.fc30 125402 Unspecified Disk based hash library
Disk based hashes is a method to create multidimensional binary trees on disk.
This library permits the extension of database concept to a plethora of
electronic data, such as graphic information. With the multidimensional binary
tree it is possible to mathematically prove that access time to any
particular record is minimized (using the concept of critical points from
calculus), which provides the means to construct optimized databases for
particular applications.
dbh-devel 5.0.16 9.fc30 488988 Unspecified Header files for disk based hash library
This package includes the static libraries and header files you will need
to compile applications for dbh.
dbh-devel 5.0.16 9.fc30 488980 Unspecified Header files for disk based hash library
This package includes the static libraries and header files you will need
to compile applications for dbh.
dblatex 0.3.10 10.fc30 5981720 Unspecified DocBook to LaTeX/ConTeXt Publishing
dblatex is a program that transforms your SGML/XMLDocBook
documents to DVI, PostScript or PDF by translating them
into pure LaTeX as a first process. MathML 2.0 markups
are supported, too. It started as a clone of DB2LaTeX.
Authors:
--------
Benoît Guillon <marsgui at users dot sourceforge dot net>
Andreas Hoenen <andreas dot hoenen at arcor dot de>
dbunit 2.5.1 7.fc30 597968 Unspecified A JUnit extension targeted for database-driven projects
DbUnit is a JUnit extension (also usable with Ant) targeted
for database-driven projects that, among other things, puts
your database into a known state between test runs. This is
an excellent way to avoid the myriad of problems that can
occur when one test case corrupts the database and causes
subsequent tests to fail or exacerbate the damage.
DbUnit has the ability to export and import your database
data to and from XML data-sets. Since version 2.0, DbUnit can
works with very large data-set when use in streaming mode.
DbUnit can also helps you to verify that your database data
match expected set of values.
dbunit-javadoc 2.5.1 7.fc30 12149856 Unspecified Javadoc for dbunit
This package contains javadoc for dbunit.
dbus 1.12.12 7.fc30 0 Unspecified D-BUS message bus
D-BUS is a system for sending messages between applications. It is
used both for the system-wide message bus service, and as a
per-user-login-session messaging facility.
dbus 1.12.12 7.fc30 0 Unspecified D-BUS message bus
D-BUS is a system for sending messages between applications. It is
used both for the system-wide message bus service, and as a
per-user-login-session messaging facility.
dbus-broker 20 3.fc30 514953 Unspecified Linux D-Bus Message Broker
dbus-broker is an implementation of a message bus as defined by the D-Bus
specification. Its aim is to provide high performance and reliability, while
keeping compatibility to the D-Bus reference implementation. It is exclusively
written for Linux systems, and makes use of many modern features provided by
recent Linux kernel releases.
dbus-c++ 0.9.0 20.fc30 526570 Unspecified Native C++ bindings for D-Bus
dbus-c++ attempts to provide a C++ API for D-Bus.
Subpackages are provided with mainloop integration.
dbus-c++ 0.9.0 20.fc30 534494 Unspecified Native C++ bindings for D-Bus
dbus-c++ attempts to provide a C++ API for D-Bus.
Subpackages are provided with mainloop integration.
dbus-c++-devel 0.9.0 20.fc30 91721 Unspecified Development files for dbus-c++
This package contains libraries and header files for
developing applications that use dbus-c++.
dbus-c++-devel 0.9.0 20.fc30 91727 Unspecified Development files for dbus-c++
This package contains libraries and header files for
developing applications that use dbus-c++.
dbus-c++-ecore 0.9.0 20.fc30 21472 Unspecified Ecore library for dbus-c++
This package contains the ecore mainloop library for dbus-c++
dbus-c++-ecore 0.9.0 20.fc30 22360 Unspecified Ecore library for dbus-c++
This package contains the ecore mainloop library for dbus-c++
dbus-c++-glib 0.9.0 20.fc30 24984 Unspecified GLib library for dbus-c++
This package contains the GLib mainloop library for dbus-c++
dbus-c++-glib 0.9.0 20.fc30 25872 Unspecified GLib library for dbus-c++
This package contains the GLib mainloop library for dbus-c++
dbus-common 1.12.12 7.fc30 11481 Unspecified D-BUS message bus configuration
The dbus-common package provides the configuration and setup files for D-Bus
implementations to provide a System and User Message Bus.
dbus-daemon 1.12.12 7.fc30 680534 Unspecified D-BUS message bus
D-BUS is a system for sending messages between applications. It is
used both for the system-wide message bus service, and as a
per-user-login-session messaging facility.
dbus-devel 1.12.12 7.fc30 130316 Unspecified Development files for D-BUS
This package contains libraries and header files needed for
developing software that uses D-BUS.
dbus-devel 1.12.12 7.fc30 130306 Unspecified Development files for D-BUS
This package contains libraries and header files needed for
developing software that uses D-BUS.
dbus-doc 1.12.12 7.fc30 21980380 Unspecified Developer documentation for D-BUS
This package contains developer documentation for D-Bus along with
other supporting documentation such as the introspect dtd file.
dbus-glib 0.110 3.fc29 392166 System Environment/Libraries GLib bindings for D-Bus
D-Bus add-on library to integrate the standard D-Bus library with
the GLib thread abstraction and main loop.
dbus-glib 0.110 3.fc29 364478 System Environment/Libraries GLib bindings for D-Bus
D-Bus add-on library to integrate the standard D-Bus library with
the GLib thread abstraction and main loop.
dbus-glib-devel 0.110 3.fc29 545160 Development/Libraries Libraries and headers for the D-Bus GLib bindings
Headers and static libraries for the D-Bus GLib bindings
dbus-glib-devel 0.110 3.fc29 541566 Development/Libraries Libraries and headers for the D-Bus GLib bindings
Headers and static libraries for the D-Bus GLib bindings
dbus-java 2.7 29.fc30 1244344 Unspecified Java implementation of the DBus protocol
D-Bus is a message bus system, a simple way for applications to
talk to one another. In addition to interprocess communication,
D-Bus helps coordinate process lifecycle; it makes it simple and
reliable to code a "single instance" application or daemon, and to
launch applications and daemons on demand when their services are
needed.
This is a complete independent implementation of the D-Bus protocol
in Java. It comprises a library to write programs in Java which
access D-Bus, a tool for generating stubs from D-Bus introspection
data and a simple daemon. Being written in Java it works on both
Windows and Linux (and other Unix-like systems).
When using a TCP transport it is entirely Java-based; when using
Unix-sockets it requires a small JNI library to use Unix-Sockets.
dbus-java-javadoc 2.7 29.fc30 1738730 Unspecified Javadocs for dbus-java
Javadocs for dbus-java
dbus-libs 1.12.12 7.fc30 509788 Unspecified Libraries for accessing D-BUS
This package contains lowlevel libraries for accessing D-BUS.
dbus-libs 1.12.12 7.fc30 464264 Unspecified Libraries for accessing D-BUS
This package contains lowlevel libraries for accessing D-BUS.
dbus-python-devel 1.2.8 5.fc30 804246 Unspecified Libraries and headers for dbus-python
Headers and static libraries for hooking up custom mainloops to the dbus python
bindings.
dbus-python-devel 1.2.8 5.fc30 804246 Unspecified Libraries and headers for dbus-python
Headers and static libraries for hooking up custom mainloops to the dbus python
bindings.
dbus-qt3 0.9 23.fc30 307190 Unspecified Qt3 DBus Bindings
This library provides Qt3-classes for accessing the DBus.
dbus-qt3 0.9 23.fc30 297706 Unspecified Qt3 DBus Bindings
This library provides Qt3-classes for accessing the DBus.
dbus-qt3-devel 0.9 23.fc30 445957 Unspecified Development files for dbus-qt3
Development files for dbus-qt3.
dbus-qt3-devel 0.9 23.fc30 402627 Unspecified Development files for dbus-qt3
Development files for dbus-qt3.
dbus-sharp 0.8.1 8.fc30 195122 Unspecified C# bindings for D-Bus
D-Bus mono bindings for use with mono programs.
dbus-sharp-devel 0.8.1 8.fc30 319 Unspecified Development files for D-Bus Sharp
Development files for D-Bus Sharp development.
dbus-sharp-devel 0.8.1 8.fc30 319 Unspecified Development files for D-Bus Sharp
Development files for D-Bus Sharp development.
dbus-sharp-glib 0.6.0 6.fc30 11597 Unspecified C# bindings for D-Bus glib main loop integration
C# bindings for D-Bus glib main loop integration
dbus-sharp-glib-devel 0.6.0 6.fc30 299 Unspecified Development files for D-Bus Sharp
Development files for D-Bus Sharp development.
dbus-sharp-glib-devel 0.6.0 6.fc30 299 Unspecified Development files for D-Bus Sharp
Development files for D-Bus Sharp development.
dbus-tests 1.12.12 7.fc30 2164436 Unspecified Tests for the dbus-daemon package
The dbus-tests package contains tests that can be used to verify
the functionality of the installed dbus-daemon package.
dbus-tools 1.12.12 7.fc30 155332 Unspecified D-BUS Tools and Utilities
Tools and utilities to interact with a running D-Bus Message Bus, provided by
the reference implementation.
dbus-x11 1.12.12 7.fc30 47577 Unspecified X11-requiring add-ons for D-BUS
D-BUS contains some tools that require Xlib to be installed, those are
in this separate package so server systems need not install X.
dbusmenu-qt 0.9.3 0.20.20160218.fc30 285710 Unspecified A Qt implementation of the DBusMenu protocol
This library provides a Qt implementation of the DBusMenu protocol.
The DBusMenu protocol makes it possible for applications to export and import
their menus over DBus.
dbusmenu-qt 0.9.3 0.20.20160218.fc30 283718 Unspecified A Qt implementation of the DBusMenu protocol
This library provides a Qt implementation of the DBusMenu protocol.
The DBusMenu protocol makes it possible for applications to export and import
their menus over DBus.
dbusmenu-qt-devel 0.9.3 0.20.20160218.fc30 425222 Unspecified Development files for dbusmenu-qt
Development files for dbusmenu-qt.
dbusmenu-qt-devel 0.9.3 0.20.20160218.fc30 425238 Unspecified Development files for dbusmenu-qt
Development files for dbusmenu-qt.
dbusmenu-qt-doc 0.9.3 0.20.20160218.fc30 407178 Unspecified Development and API documentation for dbusmenu-qt
Development and API documentation for dbusmenu-qt.
dbusmenu-qt5 0.9.3 0.20.20160218.fc30 376830 Unspecified A Qt implementation of the DBusMenu protocol
This library provides a Qt5 implementation of the DBusMenu protocol.
The DBusMenu protocol makes it possible for applications to export and import
their menus over DBus.
dbusmenu-qt5 0.9.3 0.20.20160218.fc30 363254 Unspecified A Qt implementation of the DBusMenu protocol
This library provides a Qt5 implementation of the DBusMenu protocol.
The DBusMenu protocol makes it possible for applications to export and import
their menus over DBus.
dbusmenu-qt5-devel 0.9.3 0.20.20160218.fc30 18044 Unspecified Development files for dbusmenu-qt5
Development files for dbusmenu-qt5.
dbusmenu-qt5-devel 0.9.3 0.20.20160218.fc30 18054 Unspecified Development files for dbusmenu-qt5
Development files for dbusmenu-qt5.
dbxtool 8 9.fc30 69147 Unspecified Secure Boot DBX updater
This package contains DBX updates for UEFI Secure Boot.
dc3dd 7.2.646 4.fc28 476808 Applications/Editors Patched version of GNU dd for use in computer forensics
dc3dd is a patched version of GNU dd to include a number of features useful
for computer forensics. Many of these features were inspired by dcfldd, but
were rewritten for dc3dd.
* Pattern writes. The program can write a single hexadecimal value or a
text string to the output device for wiping purposes.
* Piecewise and overall hashing with multiple algorithms and variable
size windows. Supports MD5, SHA-1, SHA-256, and SHA-512. Hashes can be
computed before or after conversions are made.
* Progress meter with automatic input/output file size probing
* Combined log for hashes and errors
* Error grouping. Produces one error message for identical sequential
errors
* Verify mode. Able to repeat any transformations done to the input
file and compare it to an output.
* Ability to split the output into chunks with numerical or alphabetic
extensions
dcap 2.47.12 7.fc30 40846 Unspecified Client Tools for dCache
dCache is a distributed mass storage system.
This package contains the client tools.
dcap-devel 2.47.12 7.fc30 9263 Unspecified Client Development Files for dCache
dCache is a distributed mass storage system.
This package contains the client development files.
dcap-devel 2.47.12 7.fc30 9263 Unspecified Client Development Files for dCache
dCache is a distributed mass storage system.
This package contains the client development files.
dcap-libs 2.47.12 7.fc30 514561 Unspecified Client Libraries for dCache
dCache is a distributed mass storage system.
This package contains the client libraries.
dcap-libs 2.47.12 7.fc30 497401 Unspecified Client Libraries for dCache
dCache is a distributed mass storage system.
This package contains the client libraries.
dcap-tunnel-gsi 2.47.12 7.fc30 42728 Unspecified GSI tunnel for dCache
This package contains the gsi tunnel plugin library used by dcap-libs.
This library is dynamically loaded at runtime.
dcap-tunnel-krb 2.47.12 7.fc30 42728 Unspecified Kerberos tunnel for dCache
This package contains the kerberos tunnel plugin library used by dcap-libs.
This library is dynamically loaded at runtime.
dcap-tunnel-ssl 2.47.12 7.fc30 18392 Unspecified SSL tunnel for dCache
This package contains the ssl tunnel plugin library used by dcap-libs.
This library is dynamically loaded at runtime.
dcap-tunnel-telnet 2.47.12 7.fc30 24688 Unspecified Telnet tunnel for dCache
This package contains the telnet tunnel plugin library used by dcap-libs.
This library is dynamically loaded at runtime.
dcfldd 1.3.4.1 19.fc30 149853 Unspecified Improved dd, useful for forensics and security
dcfldd is an enhanced version of GNU dd with features useful for forensics
and security. dcfldd has the following additional features:
* Hashing on-the-fly - dcfldd can hash the input data as it is being
transferred, helping to ensure data integrity.
* Status output - dcfldd can update the user of its progress in terms of
the amount of data transferred and how much longer operation will take.
* Flexible disk wipes - dcfldd can be used to wipe disks quickly
and with a known pattern if desired.
* Image/wipe Verify - dcfldd can verify that a target drive is a
bit-for-bit match of the specified input file or pattern.
* Multiple outputs - dcfldd can output to multiple files or disks at
the same time.
* Split output - dcfldd can split output to multiple files with more
configuration possibilities than the split command.
* Piped output and logs - dcfldd can send all its log data and output
to commands as well as files.
dcm2niix 1.0.20180622 3.fc30 1444562 Unspecified DICOM to NIfTI converter
dcm2niix is a tool designed to convert neuroimaging data from the NIfTI format
to the DICOM format.
dcm4che-test 2.6 0.17.fc30.20110530svn15516 36762830 Unspecified Test images for dcm4che2
DCM4CHE Test Data and Libraries
dcm4che-test-javadoc 2.6 0.17.fc30.20110530svn15516 111298 Unspecified Javadocs for dcm4che-test
This package contains the API documentation for dcm4che-test.
dcmtk 3.6.2 4.fc29 33973408 Development/Libraries Offis DICOM Toolkit (DCMTK)
DCMTK is a collection of libraries and applications implementing large
parts the DICOM standard. It includes software for examining,
constructing and converting DICOM image files, handling offline media,
sending and receiving images over a network connection, as well as
demonstrative image storage and worklist servers. DCMTK is is written
in a mixture of ANSI C and C++. It comes in complete source code and
is made available as "open source" software. This package includes
multiple fixes taken from the "patched DCMTK" project.
Install DCMTK if you are working with DICOM format medical image files.
dcmtk 3.6.2 4.fc29 32175212 Development/Libraries Offis DICOM Toolkit (DCMTK)
DCMTK is a collection of libraries and applications implementing large
parts the DICOM standard. It includes software for examining,
constructing and converting DICOM image files, handling offline media,
sending and receiving images over a network connection, as well as
demonstrative image storage and worklist servers. DCMTK is is written
in a mixture of ANSI C and C++. It comes in complete source code and
is made available as "open source" software. This package includes
multiple fixes taken from the "patched DCMTK" project.
Install DCMTK if you are working with DICOM format medical image files.
dcmtk-devel 3.6.2 4.fc29 12966937 Development/Libraries Development Libraries and Headers for dcmtk
Development Libraries and Headers for dcmtk. You only need to install
this if you are developing programs that use the dcmtk libraries.
dcmtk-devel 3.6.2 4.fc29 12967069 Development/Libraries Development Libraries and Headers for dcmtk
Development Libraries and Headers for dcmtk. You only need to install
this if you are developing programs that use the dcmtk libraries.
dconf 0.32.0 1.fc30 430795 Unspecified A configuration system
dconf is a low-level configuration system. Its main purpose is to provide a
backend to the GSettings API in GLib.
dconf 0.32.0 1.fc30 428863 Unspecified A configuration system
dconf is a low-level configuration system. Its main purpose is to provide a
backend to the GSettings API in GLib.
dconf-devel 0.32.0 1.fc30 198861 Unspecified Header files and libraries for dconf development
dconf development package. Contains files needed for doing software
development using dconf.
dconf-devel 0.32.0 1.fc30 198863 Unspecified Header files and libraries for dconf development
dconf development package. Contains files needed for doing software
development using dconf.
dconf-editor 3.32.0 1.fc30 2794244 Unspecified Configuration editor for dconf
Graphical tool for editing the dconf configuration database.
dcraw 9.28.0 4.fc30 572507 Unspecified Tool for decoding raw image data from digital cameras
This package contains dcraw, a command line tool to decode raw image data
downloaded from digital cameras.
dcw-gmt 1.1.1 9.fc30 24245930 Unspecified Digital Chart of the World (DCW) for GMT
DCW-GMT is an enhancement to the original 1:1,000,000 scale vector basemap of
the world available from the Princeton University Digital Map and Geospatial
Information Center and from GeoCommunity at
http://data.geocomm.com/readme/dcw/dcw.html. To read and process the data you
should install GMT, the Generic Mapping Tools.
dd2 0.2.2 23.fc30 997261 Unspecified Dodgin' Diamond 2 - Shoot'em up arcade game
This is a little shoot'em up arcade game for one or two players. It aims to
be an 'old school' arcade game with low resolution graphics, top-down scroll
action, energy based gameplay and different weapons with several levels of
power.
dd_rescue 1.99.8 6.fc30 507997 Unspecified Fault tolerant "dd" utility for rescuing data from bad media
ddrescue is a utility similar to the system utility "dd" which copies
data from a file or block device to another. ddrescue does however
not abort on errors in the input file. This makes it suitable for
rescuing data from media with errors, e.g. a disk with bad sectors.
This package includes dd_rhelp, a wrapper script facilitating data
recovery.
ddate 0.2.2 7.fc30 32381 Unspecified Convert Gregorian dates to Discordian dates
This tool prints a date in the Discordian date format.
ddccontrol 0.4.3 6.fc30 336286 Unspecified Control your monitor by software using the DDC/CI protocol
DDCcontrol is a program to control monitor parameters, like brightness and
contrast, by software, i.e. without using the OSD (On Screen Display) and
the monitor HW controls.
ddccontrol 0.4.3 6.fc30 331362 Unspecified Control your monitor by software using the DDC/CI protocol
DDCcontrol is a program to control monitor parameters, like brightness and
contrast, by software, i.e. without using the OSD (On Screen Display) and
the monitor HW controls.
ddccontrol-db 20180602 3.fc30 208398 Unspecified DDC/CI control database for ddccontrol
DDC/CU control database for DDCcontrol.
ddccontrol-devel 0.4.3 6.fc30 10829 Unspecified Development files for ddccontrol
Development files for ddccontrol.
ddccontrol-devel 0.4.3 6.fc30 10831 Unspecified Development files for ddccontrol
Development files for ddccontrol.
ddccontrol-doc 0.4.3 6.fc30 169097 Unspecified Documentation files for ddccontrol
Documentation files for ddccontrol.
ddccontrol-gtk 0.4.3 6.fc30 78917 Unspecified GTK GUI for ddccontrol
This package provides the GTK graphical user interface for ddccontrol.
ddclient 3.9.0 2.fc30 239535 Unspecified Client to update dynamic DNS host entries
ddclient is a Perl client used to update dynamic DNS entries for accounts
on many different dynamic DNS services. Features include: Operating as a
daemon, manual and automatic updates, static and dynamic updates, optimized
updates for multiple addresses, MX, wildcards, abuse avoidance, retrying
the failed updates and sending update status to syslog and through e-mail.
ddd 3.3.12 32.fc30 5561697 Unspecified GUI for several command-line debuggers
The Data Display Debugger (DDD) is a popular GUI for command-line
debuggers like GDB, DBX, JDB, WDB, XDB, the Perl debugger, and the
Python debugger. DDD allows you to view source texts and provides an
interactive graphical data display, in which data structures are
displayed as graphs. You can use your mouse to dereference pointers
or view structure contents, which are updated every time the program
stops. DDD can debug programs written in Ada, C, C++, Chill, Fortran,
Java, Modula, Pascal, Perl, and Python. DDD provides machine-level
debugging; hypertext source navigation and lookup; breakpoint,
watchpoint, backtrace, and history editors; array plots; undo and
redo; preferences and settings editors; program execution in the
terminal emulation window, debugging on a remote host, an on-line
manual, extensive help on the Motif user interface, and a command-line
interface with full editing, history and completion capabilities.
ddgr 1.6 2.fc30 127582 Unspecified DuckDuckGo from the terminal
ddgr is a cmdline utility to search DuckDuckGo from the terminal.
While googler is highly popular among cmdline users, in many forums the need
of a similar utility for privacy-aware DuckDuckGo came up. DuckDuckGo Bangs
are super-cool too! So here's ddgr for you!
Unlike the web interface, you can specify the number of search results you
would like to see per page. It's more convenient than skimming through
30-odd search results per page. The default interface is carefully
designed to use minimum space without sacrificing readability.
ddgr isn't affiliated to DuckDuckGo in any way.
ddiskit 3.6 4.fc30 165813 Unspecified Tool for Red Hat Enterprise Linux Driver Update Disk creation
Ddiskit is a little framework for simplifying creation of proper
Driver Update Disks (DUD) used for providing new or updated out-of-tree
kernel modules.
ddpt 0.95 9.fc30 354596 Unspecified Variant of the dd utility for SCSI/storage devices
The ddpt utility is a variant of the standard Unix command dd which copies
files. The ddpt utility specializes in files that are block devices. For block
devices that understand the SCSI command set, finer grain control over the
copy may be available via a SCSI pass-through interface. Note that recent
(S)ATA disks can often be driven by SCSI commands due to SCSI to ATA
translation (SAT) implemented in the kernel.
ddrescue 1.23 3.fc30 355577 Unspecified Data recovery tool trying hard to rescue data in case of read errors
GNU ddrescue is a data recovery tool. It copies data from one file or block
device (hard disc, cd-rom, etc) to another, trying hard to rescue data in
case of read errors. GNU ddrescue does not truncate the output file if not
asked to. So, every time you run it on the same output file, it tries to
fill in the gaps.
ddupdate 0.6.1 4.fc30 176419 Unspecified Tool updating DNS data for dynamic IP addresses
A tool to update dynamic IP addresses typically obtained using DHCP
with dynamic DNS services such as changeip.com, duckdns.org or no-ip.com.
It makes it possible to access a machine with a fixed name like
myhost.duckdns.org even if the ip address changes. ddupdate caches the
address, and only attempts the update if the address actually is changed.
The tool has a plugin structure with plugins for obtaining the actual
address (typically hardware-dependent) and to update it (service depenâ€
dent). For supported services, it's a linux-centric, user-friendly and
flexible alternative to the ubiquotous ddclient.
ddupdate is distributed with systemd support to run at regular intervals,
and with NetworkManager templates to run when interfaces goes up or down.
debbuild 18.6.1 3.fc30 110885 Unspecified Build Debian-compatible .deb packages from RPM .spec files
debbuild attempts to build Debian-friendly semi-native packages from
RPM spec files, RPM-friendly tarballs, and RPM source packages
(.src.rpm files). It accepts most of the options rpmbuild does, and
should be able to interpret most spec files usefully.
debconf 1.5.69 3.fc30 527704 Unspecified Debian configuration management system
Debconf is a configuration management system for Debian
packages. Packages use Debconf to ask questions when
they are installed.
debconf-doc 1.5.69 3.fc30 468663 Unspecified Debconf documentation
This package contains lots of additional documentation for Debconf,
including the debconf user's guide, documentation about using
different backend databases via the /etc/debconf.conf file, and a
developer's guide to debconf.
debconf-gnome 1.5.69 3.fc30 19396 Unspecified GNOME frontend for debconf
This package contains the GNOME frontend for debconf.
debconf-i18n 1.5.69 3.fc30 886573 Unspecified Full internationalization support for debconf
This package provides full internationalization for debconf,
including translations into all available languages, support
for using translated debconf templates, and support for
proper display of multibyte character sets.
debconf-kde 1.5.69 3.fc30 2085 Unspecified KDE frontend for debconf
This package contains the KDE frontend for debconf.
debconf-utils 1.5.69 3.fc30 344300 Unspecified This package contains some small utilities for debconf developers
This package contains some small utilities for debconf developers.
debhelper 11.4 3.fc30 1248607 Unspecified Helper programs for debian/rules
A collection of programs that can be used in a debian/rules file to
automate common tasks related to building Debian packages. Programs
are included to install various files into your package, compress
files, fix file permissions, integrate your package with the Debian
menu system, debconf, doc-base, etc. Most Debian packages use debhelper
as part of their build process.
debian-keyring 2018.1 2.fc30 85270 Unspecified GnuPG archive keys of the Debian archive
The Debian project digitally signs its Release files. This package contains the
archive keys used for that.
debmirror 2.30 2.fc30 181635 Unspecified Debian partial mirror script, with ftp and package pool support
This program downloads and maintains a partial local Debian mirror.
It can mirror any combination of architectures, distributions and
sections. Files are transferred by ftp, http, hftp or rsync, and package
pools are fully supported. It also does locking and updates trace files.
debootstrap 1.0.109 3.fc30 295494 System Environment/Base Debian GNU/Linux bootstrapper
debootstrap is used to create a Debian base system from scratch, without
requiring the availability of dpkg or apt. It does this by downloading
.deb files from a mirror site, and carefully unpacking them into a
directory which can eventually be chrooted into.
This might be often useful coupled with virtualization techniques to run
Debian GNU/Linux guest system.
decentxml 1.4 19.fc30 148375 Unspecified XML parser optimized for round-tripping and code reuse
XML parser optimized for round-tripping and code reuse with main
features being:
* Allows 100% round-tripping, even for weird whitespace between
attributes in the start tag or in the end tag
* Suitable for building editors and filters which want/need to
preserve the original file layout as much as possible
* Error messages have line and column information
* Easy to reuse individual components
* XML 1.1 compatible
decentxml-javadoc 1.4 19.fc30 2577498 Unspecified API documentation for decentxml
This package contains the API documentation for decentxml.
decibel-audio-player 1.08 19.fc30 1276575 Unspecified Music player for GNOME
Decibel is an audio player that aims at being very straightforward to use by
means of a very clean and user friendly interface. It is especially targeted
at GNOME and will follow, as closely as possible, the GNOME HIG. It makes use
of the GStreamer library to read audio files.
deco 1.6.4 7.fc30 87957 Unspecified Extractor for various archive file formats
deco is a Un*x program, written in SUSv3-compliant C99,
that is able to extract various archive file formats
with features like consistent behavior, consistent
interface and much more.
deco-archive 1.7 6.fc30 40886 Unspecified Extraction scripts for various archive formats for use of deco
deco-archive provides support for popular archive
formats to the deco file extraction framework.
dee 1.2.7 24.fc30 423862 Unspecified Model to synchronize multiple instances over DBus
Libdee is a library that uses DBus to provide objects allowing you to
create Model-View-Controller type programs across DBus. It also
consists of utility objects which extend DBus allowing for peer-to-peer
discoverability of known objects without needing a central registrar.
dee 1.2.7 24.fc30 398438 Unspecified Model to synchronize multiple instances over DBus
Libdee is a library that uses DBus to provide objects allowing you to
create Model-View-Controller type programs across DBus. It also
consists of utility objects which extend DBus allowing for peer-to-peer
discoverability of known objects without needing a central registrar.
dee-devel 1.2.7 24.fc30 1418027 Unspecified Development files for dee
The dee-devel package contains libraries and header files for
developing applications that use dee.
dee-devel 1.2.7 24.fc30 1418031 Unspecified Development files for dee
The dee-devel package contains libraries and header files for
developing applications that use dee.
deepin-account-faces 1.0.11 2.fc30 1482347 Unspecified Account faces for Linux Deepin
Account faces for Linux Deepin
deepin-api 3.17.0 1.fc30 99047673 Unspecified Go-lang bingding for dde-daemon
Go-lang bingding for dde-daemon.
deepin-artwork-themes 15.12.4 5.fc30 39758 Unspecified Deepin artwork themes
Deepin artwork themes
deepin-calculator 1.0.10 2.fc30 1270184 Unspecified An easy to use calculator for ordinary users
An easy to use calculator for ordinary users.
deepin-calendar 1.2.6 2.fc30 362158 Unspecified Calendar for Deepin Desktop Environment
Calendar for Deepin Desktop Environment.
deepin-clone 1.1.0 2.fc30 5263302 Unspecified Disk and partition backup/restore tool
Disk and partition backup/restore tool.
deepin-control-center 4.9.4 1.fc30 13461253 Unspecified New control center for Linux Deepin
New control center for Linux Deepin.
deepin-daemon 3.23.0 2.fc30 90251569 Unspecified Daemon handling the DDE session settings
Daemon handling the DDE session settings
deepin-dbus-generator 0.6.6 6.fc30 4057961 Unspecified Convert dbus interfaces to go-lang or qml wrapper code
Static dbus binding generator for dlib.
deepin-desktop 4.7.7 2.fc30 5291488 Unspecified Deepin desktop environment - desktop module
Deepin desktop environment - desktop module.
deepin-desktop-base 2019.01.28 3.fc30 82005 Unspecified Base component for Deepin
This package provides some components for Deepin desktop environment.
- deepin logo
- deepin desktop version
- login screen background image
- language information
deepin-desktop-schemas 3.12.0 2.fc30 291353 Unspecified GSettings deepin desktop-wide schemas
GSettings deepin desktop-wide schemas.
deepin-dock 4.9.0 3.fc30 3253436 Unspecified Deepin desktop-environment - Dock module
Deepin desktop-environment - Dock module.
deepin-dock 4.9.0 3.fc30 3179532 Unspecified Deepin desktop-environment - Dock module
Deepin desktop-environment - Dock module.
deepin-dock-devel 4.9.0 3.fc30 12901 Unspecified Development package for deepin-dock
Header files and libraries for deepin-dock.
deepin-dock-devel 4.9.0 3.fc30 12901 Unspecified Development package for deepin-dock
Header files and libraries for deepin-dock.
deepin-draw 1.0.0 2.fc30 2142503 Unspecified A lightweight drawing tool for Linux Deepin
A lightweight drawing tool for Linux Deepin.
deepin-editor 1.2.6.3 3.fc30 2271025 Unspecified Simple editor for Linux Deepin
Simple editor for Linux Deepin.
deepin-file-manager 4.7.7 2.fc30 14632030 Unspecified Deepin File Manager
File manager front end of Deepin OS.
deepin-file-manager 4.7.7 2.fc30 14528554 Unspecified Deepin File Manager
File manager front end of Deepin OS.
deepin-file-manager-devel 4.7.7 2.fc30 245036 Unspecified Development package for deepin-file-manager
Header files and libraries for deepin-file-manager.
deepin-file-manager-devel 4.7.7 2.fc30 245038 Unspecified Development package for deepin-file-manager
Header files and libraries for deepin-file-manager.
deepin-gettext-tools 1.0.8 2.fc30 61823 Unspecified Deepin Gettext Tools
The tools of gettext function wrapper.
desktop-ts-convert - handling desktop file translations.
policy-ts-convert - convert PolicyKit Policy file to the ts file.
update-pot - scan msgid and generate pot file according to the ini file.
generate-mo - scan po files and generate mo files according to the ini file.
deepin-gir-generator 1.2.0 1.fc30 4277128 Unspecified Generate static golang bindings for GObject
Generate static golang bindings for GObject
deepin-grub2-themes 1.0.0 5.fc30 3715313 Unspecified Deepin grub2 themes
Deepin grub2 themes
deepin-gtk-theme 17.10.10 2.fc30 3710245 Unspecified Deepin GTK Theme
Deepin GTK Theme.
deepin-help 15.4.8 4.fc30 33848011 Unspecified Help files for DDE
Help files for DDE.
deepin-icon-theme 15.12.68 2.fc30 43204625 Unspecified Icons for the Deepin Desktop Environment
Icons for the Deepin Desktop Environment.
deepin-image-viewer 1.3.8 1.fc30 6132495 Unspecified Deepin Image Viewer
Deepin Image Viewer.
deepin-image-viewer 1.3.8 1.fc30 6139203 Unspecified Deepin Image Viewer
Deepin Image Viewer.
deepin-launcher 4.6.6 2.fc30 1631558 Unspecified Deepin desktop-environment - Launcher module
Deepin desktop-environment - Launcher module.
deepin-launcher 4.6.6 2.fc30 1579214 Unspecified Deepin desktop-environment - Launcher module
Deepin desktop-environment - Launcher module.
deepin-launcher-devel 4.6.6 2.fc30 72932 Unspecified Development package for deepin-launcher
Header files and libraries for deepin-launcher.
deepin-launcher-devel 4.6.6 2.fc30 72932 Unspecified Development package for deepin-launcher
Header files and libraries for deepin-launcher.
deepin-manual-directory 2019.01.28 3.fc30 138 Unspecified Package that owns the Deepin manual directory
This package owns the Deepin manual directory. This is a workaround
before deepin-manual actually comes into Fedora to unblock packaging.
deepin-menu 3.4.1 2.fc30 211260 Unspecified Deepin menu service
Deepin menu service for building beautiful menus.
deepin-metacity 3.22.24 2.fc30 6756345 Unspecified 2D window manager for Deepin
2D window manager for Deepin.
deepin-metacity 3.22.24 2.fc30 6886137 Unspecified 2D window manager for Deepin
2D window manager for Deepin.
deepin-metacity-devel 3.22.24 2.fc30 71626 Unspecified Development package for deepin-metacity
Header files and libraries for deepin-metacity.
deepin-metacity-devel 3.22.24 2.fc30 71628 Unspecified Development package for deepin-metacity
Header files and libraries for deepin-metacity.
deepin-mutter 3.20.38 2.fc30 5268505 Unspecified Base window manager for deepin, fork of gnome mutter
Base window manager for deepin, fork of gnome mutter.
deepin-mutter 3.20.38 2.fc30 5195301 Unspecified Base window manager for deepin, fork of gnome mutter
Base window manager for deepin, fork of gnome mutter.
deepin-mutter-devel 3.20.38 2.fc30 711536 Unspecified Development package for deepin-mutter
Header files and libraries for base window manager for deepin,
fork of gnome mutter.
deepin-mutter-devel 3.20.38 2.fc30 711542 Unspecified Development package for deepin-mutter
Header files and libraries for base window manager for deepin,
fork of gnome mutter.
deepin-network-utils 0.0.9 1.fc30 438916 Unspecified Deepin desktop-environment - network utils
Deepin desktop-environment - network utils.
deepin-network-utils 0.0.9 1.fc30 412832 Unspecified Deepin desktop-environment - network utils
Deepin desktop-environment - network utils.
deepin-network-utils-devel 0.0.9 1.fc30 20574 Unspecified Development package for deepin-network-utils
Header files and libraries for deepin-network-utils.
deepin-network-utils-devel 0.0.9 1.fc30 20576 Unspecified Development package for deepin-network-utils
Header files and libraries for deepin-network-utils.
deepin-notifications 3.2.1 2.fc30 429677 Unspecified System notifications for linuxdeepin desktop environment
System notifications for linuxdeepin desktop environment.
deepin-picker 1.6.4 2.fc30 299107 Unspecified Color picker tool for deepin
Simplest color picker.
deepin-polkit-agent 0.2.4 1.fc30 254720 Unspecified Deepin Polkit Agent
DDE Polkit Agent is the polkit agent used in Deepin Desktop Environment.
deepin-polkit-agent 0.2.4 1.fc30 249080 Unspecified Deepin Polkit Agent
DDE Polkit Agent is the polkit agent used in Deepin Desktop Environment.
deepin-polkit-agent-devel 0.2.4 1.fc30 1985 Unspecified Development package for deepin-polkit-agent
Header files and libraries for deepin-polkit-agent.
deepin-polkit-agent-devel 0.2.4 1.fc30 1985 Unspecified Development package for deepin-polkit-agent
Header files and libraries for deepin-polkit-agent.
deepin-qml-widgets 2.3.6 6.fc30 872123 Unspecified Deepin QML widgets
Extends QML by providing widgets that is used by Deepin applications.
deepin-qml-widgets 2.3.6 6.fc30 894431 Unspecified Deepin QML widgets
Extends QML by providing widgets that is used by Deepin applications.
deepin-qt-dbus-factory 1.1.0 1.fc30 3690761 Unspecified A repository stores auto-generated Qt5 dbus code
A repository stores auto-generated Qt5 dbus code.
deepin-qt-dbus-factory 1.1.0 1.fc30 3421517 Unspecified A repository stores auto-generated Qt5 dbus code
A repository stores auto-generated Qt5 dbus code.
deepin-qt-dbus-factory-devel 1.1.0 1.fc30 400117 Unspecified Development package for deepin-qt-dbus-factory
Header files and libraries for deepin-qt-dbus-factory.
deepin-qt-dbus-factory-devel 1.1.0 1.fc30 400119 Unspecified Development package for deepin-qt-dbus-factory
Header files and libraries for deepin-qt-dbus-factory.
deepin-qt5integration 0.3.7.2 2.fc30 2132435 Unspecified Qt platform theme integration plugins for DDE
Multiple Qt plugins to provide better Qt5 integration for DDE is included.
deepin-qt5integration 0.3.7.2 2.fc30 2120575 Unspecified Qt platform theme integration plugins for DDE
Multiple Qt plugins to provide better Qt5 integration for DDE is included.
deepin-screensaver 0.0.7 1.fc30 159396 Unspecified Screensaver Tool
Deepin screensaver viewer and tools.
deepin-screensaver-data 0.0.7 1.fc30 849177 Unspecified Screensaver data
Extra data for Deepin Screensaver.
deepin-screenshot 4.1.8 2.fc30 1081557 Unspecified Deepin Screenshot Tool
Provide a quite easy-to-use screenshot tool. Features:
* Global hotkey to triggle screenshot tool
* Take screenshot of a selected area
* Easy to add text and line drawings onto the screenshot
deepin-session-ui 4.8.11 2.fc30 12679124 Unspecified Deepin desktop-environment - Session UI module
This project include those sub-project:
- dde-shutdown: User interface of shutdown.
- dde-lock: User interface of lock screen.
- dde-lockservice: The back-end service of locking screen.
- lightdm-deepin-greeter: The user interface when you login in.
- dde-switchtogreeter: The tools to switch the user to login in.
- dde-lowpower: The user interface of reminding low power.
- dde-osd: User interface of on-screen display.
- dde-hotzone: User interface of setting hot zone.
deepin-shortcut-viewer 1.3.5 2.fc30 146092 Unspecified Deepin Shortcut Viewer
The program displays a shortcut key window when a JSON data is passed.
deepin-sound-theme 15.10.3 2.fc30 5054812 Unspecified Deepin sound theme
Sound files for the Deeping Desktop Environment.
deepin-system-monitor 1.4.8.1 1.fc30 1564006 Unspecified A more user-friendly system monitor
A more user-friendly system monitor.
deepin-terminal 3.2.1.1 2.fc30 878550 Unspecified Default terminal emulation application for Deepin
Default terminal emulation application for Deepin.
deepin-terminal-data 3.2.1.1 2.fc30 1229796 Unspecified Data files of Deepin Terminal
The deepin-terminal-data package provides shared data for Deepin Terminal.
deepin-topbar 0.6.2 2.fc30 1661691 Unspecified Topbar for Deepin desktop environment
Topbar for Deepin desktop environment.
deepin-wallpapers 1.7.6 5.fc30 67102856 Unspecified Deepin Wallpapers provides wallpapers of DDE
Deepin Wallpapers provides wallpapers of DDE.
deepin-wm 1.9.37 1.fc30 1627448 Unspecified Deepin Window Manager
Deepin Window Manager
deepin-wm 1.9.37 1.fc30 1461280 Unspecified Deepin Window Manager
Deepin Window Manager
deepin-wm-devel 1.9.37 1.fc30 16295 Unspecified Development package for deepin-wm
Header files and libraries for deepin-wm
deepin-wm-devel 1.9.37 1.fc30 16297 Unspecified Development package for deepin-wm
Header files and libraries for deepin-wm
deepin-wm-switcher 1.1.9 4.fc30 204088 Unspecified Window manager switcher for Deepin
Deepin Window Manager monitoring and auto-switching service.
It is capable of:
- monitoring health of 3d wm and falling back to 2d if bad things happened.
- detecting platform capability and choose 2d/3d wm accordingly.
dehydrated 0.6.2 3.fc30 154699 Unspecified A client for signing certificates with an ACME server
This is a client for signing certificates with an ACME-server (currently
only provided by Let's Encrypt) implemented as a relatively simple bash-
script. Dehydrated supports both ACME v1 and the new ACME v2 including
support for wildcard certificates!
Current features:
* Signing of a list of domains
* Signing of a CSR
* Renewal if a certificate is about to expire or SAN (subdomains) changed
* Certificate revocation
deja-dup 39.1 1.fc30 3999839 Unspecified Simple backup tool and frontend for duplicity
Déjà Dup is a simple backup tool. It hides the complexity of doing backups the
'right way' (encrypted, off-site, and regular) and uses duplicity as the
backend.
Features:
• Support for local, remote, or cloud backup locations (Amazon S3 or Rackspace)
• Securely encrypts and compresses your data
• Incrementally backs up, letting you restore from any particular backup
• Schedules regular backups
• Integrates well into your GNOME desktop
deja-dup-nautilus 39.1 1.fc30 26576 Unspecified Déjà Dup extension for nautilus
This package contains the Déjà Dup extension for the nautilus file manger.
It adds an item to the nautilus context menu that lets you restore files.
dejagnu 1.6.1 5.fc30 838071 Unspecified A front end for testing other programs
DejaGnu is an Expect/Tcl based framework for testing other programs.
DejaGnu has several purposes: to make it easy to write tests for any
program; to allow you to write tests which will be portable to any
host or target where a program must be tested; and to standardize the
output format of all tests (making it easier to integrate the testing
into software development).
dejavu-fonts-common 2.37 1.fc30 152425 Unspecified Common files for the Dejavu font set
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of files used by other DejaVu packages.
dejavu-lgc-sans-fonts 2.37 1.fc30 4804599 Unspecified Variable-width sans-serif font faces, Latin-Greek-Cyrillic subset
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu sans-serif variable-width font faces, with
unicode coverage restricted to Latin, Greek and Cyrillic.
dejavu-lgc-sans-mono-fonts 2.37 1.fc30 1031635 Unspecified Monospace sans-serif font faces, Latin-Greek-Cyrillic subset
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu sans-serif monospace font faces, with
unicode coverage restricted to Latin, Greek and Cyrillic.
dejavu-lgc-serif-fonts 2.37 1.fc30 2495655 Unspecified Variable-width serif font faces, Latin-Greek-Cyrillic subset
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu serif variable-width font faces, with
unicode coverage restricted to Latin, Greek and Cyrillic.
dejavu-math-tex-gyre-fonts 2.37 1.fc30 577616 Unspecified DejaVu Math TeX Gyre font faces
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu Math TeX Gyre font faces.
dejavu-sans-fonts 2.37 1.fc30 5656350 Unspecified Variable-width sans-serif font faces
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu sans-serif variable-width font faces, in
their unabridged version.
dejavu-sans-mono-fonts 2.37 1.fc30 1180826 Unspecified Monospace sans-serif font faces
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu sans-serif monospace font faces, in their
unabridged version.
dejavu-serif-fonts 2.37 1.fc30 2802163 Unspecified Variable-width serif font faces
The DejaVu font set is based on the “Bitstream Vera†fonts, release 1.10. Its
purpose is to provide a wider range of characters, while maintaining the
original style, using an open collaborative development process.
This package consists of the DejaVu serif variable-width font faces, in their
unabridged version.
deletemail 0.5 22.fc30 115339 Unspecified A non-interactive tool for deleting mails
deletemail is a non-interactive tool for removing mail which is older
than a configurable number of days from one or more IMAP mailboxes. By
default, mail which is not marked as seen on the server will not be
deleted. If, for example, fetchmail is used for receiving mail from an
IMAP server, deletemail might be useful, since fetchmail deletes mail
either immediately or not at all. Thus, you could use fetchmails keep
option (so that fetchmail never deletes anything) and let deletemail
handle the removal of mail. Currently, the IMAP4 and IMAP4rev1 protocols
are supported, optionally using SSL/TLS for secure IMAP connections.
deltaiso 3.6 29.fc30 193560 Unspecified Create deltas between isos containing rpms
This package contains tools for creating and using deltasisos,
a difference between an old and a new iso containing rpms.
deltarpm 3.6 29.fc30 287463 Unspecified Create deltas between rpms
A deltarpm contains the difference between an old
and a new version of a rpm, which makes it possible
to recreate the new rpm from the deltarpm and the old
one. You don't have to have a copy of the old rpm,
deltarpms can also work with installed rpms.
deltaspike 1.2.1 11.fc30 117541 Unspecified Portable CDI extensions
DeltaSpike consist of a number of portable CDI extensions
that provide useful features for Java application developers.
deltaspike-bean-validation-module 1.2.1 11.fc30 47282 Unspecified Apache DeltaSpike BeanValidation-Module
Apache DeltaSpike BeanValidation-Module APIs and implementations.
deltaspike-cdictrl 1.2.1 11.fc30 143626 Unspecified Apache DeltaSpike ContainerControl
This project provides a way to generically run CDI containers
from inside of unit tests or Java SE applications.
deltaspike-core 1.2.1 11.fc30 377634 Unspecified Apache DeltaSpike Core
Apache DeltaSpike Core APIs and Implementation.
deltaspike-data-module 1.2.1 11.fc30 284673 Unspecified Apache DeltaSpike Data-Module
Apache DeltaSpike Data-Module APIs and implementations.
deltaspike-javadoc 1.2.1 11.fc30 8866614 Unspecified Javadoc for deltaspike
This package contains javadoc for deltaspike.
deltaspike-jpa-module 1.2.1 11.fc30 83161 Unspecified Apache DeltaSpike JPA-Module
Apache DeltaSpike JPA-Module APIs and implementations.
deltaspike-jsf-module 1.2.1 11.fc30 465189 Unspecified Apache DeltaSpike JSF-Module
Apache DeltaSpike JSF-Module APIs and implementations.
deltaspike-modules 1.2.1 11.fc30 13982 Unspecified Apache DeltaSpike Modules
Apache DeltaSpike Modules Parent Pom.
deltaspike-partial-bean-module 1.2.1 11.fc30 59314 Unspecified Apache DeltaSpike Partial-Bean-Module
Apache DeltaSpike Partial-Bean-Module APIs and implementations.
deltaspike-scheduler-module 1.2.1 11.fc30 71678 Unspecified Apache DeltaSpike Scheduler-Module
Apache DeltaSpike Scheduler-Module APIs and implementations.
deltaspike-security-module 1.2.1 11.fc30 92226 Unspecified Apache DeltaSpike Security-Module
Apache DeltaSpike Security-Module APIs and implementations.
deltaspike-servlet-module 1.2.1 11.fc30 61224 Unspecified Apache DeltaSpike Servlet-Module
Apache DeltaSpike Servlet-Module APIs and implementations.
deltaspike-test-control-module 1.2.1 11.fc30 57905 Unspecified Apache DeltaSpike Test-Control-Module
Apache DeltaSpike Test-Control-Module APIs and implementations.
deltaspike-test-utils 1.2.1 11.fc30 38664 Unspecified Apache DeltaSpike Test-Utils
This package contains our Test Categories and
other useful stuff for running our tests.
deluge 1.3.15 12.fc30 0 Unspecified A GTK+ BitTorrent client with support for DHT, UPnP, and PEX
Deluge is a new BitTorrent client, created using Python and GTK+. It is
intended to bring a native, full-featured client to Linux GTK+ desktop
environments such as GNOME and XFCE. It supports features such as DHT
(Distributed Hash Tables), PEX (µTorrent-compatible Peer Exchange), and UPnP
(Universal Plug-n-Play) that allow one to more easily share BitTorrent data
even from behind a router with virtually zero configuration of port-forwarding.
deluge-common 1.3.15 12.fc30 3932343 Unspecified Files common to Deluge sub packages
Common files needed by the Deluge bittorrent client sub packages
deluge-console 1.3.15 12.fc30 181973 Unspecified CLI to Deluge
Deluge bittorent client command line interface
deluge-daemon 1.3.15 12.fc30 1325 Unspecified The Deluge daemon
Files for the Deluge daemon
deluge-gtk 1.3.15 12.fc30 1735573 Unspecified The gtk UI to Deluge
Deluge bittorent client GTK graphical user interface
deluge-images 1.3.15 12.fc30 393570 Unspecified Image files for deluge
Data files used by the GTK and web user interface for Deluge bittorent client
deluge-web 1.3.15 12.fc30 1949755 Unspecified Web interface to Deluge
Deluge bittorent client web interface
delve 1.2.0 1.fc30 16371773 Unspecified A debugger for the Go programming language
Delve is a debugger for the Go programming language. The goal of the project
is to provide a simple, full featured debugging tool for Go. Delve should be
easy to invoke and easy to use. Chances are if you're using a debugger, things
aren't going your way. With that in mind, Delve should stay out of your way as
much as possible.
demorse 1.2 11.fc30 102158 Unspecified Command line tool for decoding Morse code signals
demorse is a non-interactive command line tool for decoding Morse code signals
into text. demorse detects the "dihs" and "dahs" that make a Morse code
character via the computer's sound card, which can be connected to a radio
receiver tuned to a CW Morse code transmission or to a tone generator.
The input signal is processed by a Goertzel tone detector which produces "mark"
or "space" (signal/no signal) outputs and the resulting stream of Morse code
"elements" is decoded into an ASCII character for printing to the screen.
Currently demorse is a non- interactive command line tool for the console and
decoded Morse signals are sent to stdout.
denemo 2.2.0 5.fc30 29542756 Unspecified Graphical music notation program
Denemo is a free software (GPL) music notation editor for GNU/Linux that
lets you rapidly enter notation for typesetting via the LilyPond music
engraver. You can compose, transcribe, arrange, listen to the music
and much more.
denemo-emmentaler-fonts 2.2.0 5.fc30 60923 Unspecified Denemo emmentaler fonts
Denemo is a free software (GPL) music notation editor for GNU/Linux that
lets you rapidly enter notation for typesetting via the LilyPond music
engraver. You can compose, transcribe, arrange, listen to the music
and much more.
These are the emmentaler.ttf fonts derived from lilypond's fonts.
denemo-feta-fonts 2.2.0 5.fc30 27349 Unspecified Denemo feta fonts
Denemo is a free software (GPL) music notation editor for GNU/Linux that
lets you rapidly enter notation for typesetting via the LilyPond music
engraver. You can compose, transcribe, arrange, listen to the music
and much more.
These are the feta.ttf fonts derived from lilypond's fonts.
denemo-fonts-common 2.2.0 5.fc30 37468 Unspecified Denemo fonts common dir
Denemo is a free software (GPL) music notation editor for GNU/Linux that
lets you rapidly enter notation for typesetting via the LilyPond music
engraver. You can compose, transcribe, arrange, listen to the music
and much more.
This contains the directory common to all Denemo fonts.
denemo-music-fonts 2.2.0 5.fc30 1366404 Unspecified Denemo Denemo fonts
Denemo is a free software (GPL) music notation editor for GNU/Linux that
lets you rapidly enter notation for typesetting via the LilyPond music
engraver. You can compose, transcribe, arrange, listen to the music
and much more.
These are the Denemo.ttf fonts derived from FreeSerif.ttf and FreeSans.ttf.
dep 0.5.1 1.fc30 17864111 Unspecified Go dependency management tool
Go dependency management tool
dep-devel 0.5.1 1.fc30 1408524 Unspecified Go dependency management tool
Go dependency management tool
This package contains library source intended for
building other packages which use import path with
github.com/golang/dep prefix.
derby 10.13.1.1 4.fc29 7437523 Unspecified Relational database implemented entirely in Java
Apache Derby, an Apache DB sub-project, is a relational database implemented
entirely in Java. Some key advantages include a small footprint, conformance
to Java, JDBC, and SQL standards and embedded JDBC driver.
derby-javadoc 10.13.1.1 4.fc29 155809890 Unspecified API documentation for derby.
API documentation for derby..
derelict 3 44.20150730git10a517b.fc28 1753250 Unspecified Collection of D bindings to C shared libraries
derelict supports some useful features for project development, including:
- Cross-Platform Consistency
derelict loads shared libraries manually at run-time and throws an exception
when the library, or any symbol in the library, fails to load. This gives you
complete control over how to handle the case of a missing shared library. You
can fall back to a different code path, give your users a helpful error message
or take any action you want. Regardless, you have consistent behavior across
multiple platforms.
- Selective Symbol Loading - This feature allows you to override exceptions
thrown by derelict when a shared library symbol fails to load. It is a goal of
the project that each derelict package be updated from time-to-time to load the
latest version of each library. Often, new library versions include new
functions. If a user has an older version of the library installed, one that is
missing the new function symbols, derelict will notice and throw an exception.
By making use of Selective Symbol Loading, you can override this behavior and
allow the older library version to load successfully.
derelict 3 44.20150730git10a517b.fc28 1781022 Unspecified Collection of D bindings to C shared libraries
derelict supports some useful features for project development, including:
- Cross-Platform Consistency
derelict loads shared libraries manually at run-time and throws an exception
when the library, or any symbol in the library, fails to load. This gives you
complete control over how to handle the case of a missing shared library. You
can fall back to a different code path, give your users a helpful error message
or take any action you want. Regardless, you have consistent behavior across
multiple platforms.
- Selective Symbol Loading - This feature allows you to override exceptions
thrown by derelict when a shared library symbol fails to load. It is a goal of
the project that each derelict package be updated from time-to-time to load the
latest version of each library. Often, new library versions include new
functions. If a user has an older version of the library installed, one that is
missing the new function symbols, derelict will notice and throw an exception.
By making use of Selective Symbol Loading, you can override this behavior and
allow the older library version to load successfully.
derelict-AL 3 44.20150730git10a517b.fc28 55200 Unspecified Libraries to use AL
Libraries for AL to use in D programming language.
derelict-AL 3 44.20150730git10a517b.fc28 57624 Unspecified Libraries to use AL
Libraries for AL to use in D programming language.
derelict-AL-devel 3 44.20150730git10a517b.fc28 18712 Unspecified Header files and libraries for AL
Header files and libraries for AL to use in D programming language.
derelict-AL-devel 3 44.20150730git10a517b.fc28 18712 Unspecified Header files and libraries for AL
Header files and libraries for AL to use in D programming language.
derelict-ALURE 3 44.20150730git10a517b.fc28 34964 Unspecified Libraries to use ALURE
Libraries for ALURE to use in D programming language.
derelict-ALURE 3 44.20150730git10a517b.fc28 34856 Unspecified Libraries to use ALURE
Libraries for ALURE to use in D programming language.
derelict-ALURE-devel 3 44.20150730git10a517b.fc28 7503 Unspecified Header files and libraries for ALURE
Header files and libraries for ALURE to use in D programming language.
derelict-ALURE-devel 3 44.20150730git10a517b.fc28 7503 Unspecified Header files and libraries for ALURE
Header files and libraries for ALURE to use in D programming language.
derelict-ASSIMP3 3 44.20150730git10a517b.fc28 127856 Unspecified Libraries to use ASSIMP3
Libraries for ASSIMP3 to use in D programming language.
derelict-ASSIMP3 3 44.20150730git10a517b.fc28 128536 Unspecified Libraries to use ASSIMP3
Libraries for ASSIMP3 to use in D programming language.
derelict-ASSIMP3-devel 3 44.20150730git10a517b.fc28 39829 Unspecified Header files and libraries for ASSIMP3
Header files and libraries for ASSIMP3 to use in D programming language.
derelict-ASSIMP3-devel 3 44.20150730git10a517b.fc28 39829 Unspecified Header files and libraries for ASSIMP3
Header files and libraries for ASSIMP3 to use in D programming language.
derelict-FI 3 44.20150730git10a517b.fc28 383592 Unspecified Libraries to use FI
Libraries for FI to use in D programming language.
derelict-FI 3 44.20150730git10a517b.fc28 383464 Unspecified Libraries to use FI
Libraries for FI to use in D programming language.
derelict-FI-devel 3 44.20150730git10a517b.fc28 64500 Unspecified Header files and libraries for FI
Header files and libraries for FI to use in D programming language.
derelict-FI-devel 3 44.20150730git10a517b.fc28 64500 Unspecified Header files and libraries for FI
Header files and libraries for FI to use in D programming language.
derelict-FT 3 44.20150730git10a517b.fc28 182984 Unspecified Libraries to use FT
Libraries for FT to use in D programming language.
derelict-FT 3 44.20150730git10a517b.fc28 180168 Unspecified Libraries to use FT
Libraries for FT to use in D programming language.
derelict-FT-devel 3 44.20150730git10a517b.fc28 145245 Unspecified Header files and libraries for FT
Header files and libraries for FT to use in D programming language.
derelict-FT-devel 3 44.20150730git10a517b.fc28 145245 Unspecified Header files and libraries for FT
Header files and libraries for FT to use in D programming language.
derelict-GL3 3 44.20150730git10a517b.fc28 1041928 Unspecified Libraries to use GL3
Libraries for GL3 to use in D programming language.
derelict-GL3 3 44.20150730git10a517b.fc28 1029016 Unspecified Libraries to use GL3
Libraries for GL3 to use in D programming language.
derelict-GL3-devel 3 44.20150730git10a517b.fc28 424552 Unspecified Header files and libraries for GL3
Header files and libraries for GL3 to use in D programming language.
derelict-GL3-devel 3 44.20150730git10a517b.fc28 424552 Unspecified Header files and libraries for GL3
Header files and libraries for GL3 to use in D programming language.
derelict-GLFW3 3 44.20150730git10a517b.fc28 66624 Unspecified Libraries to use GLFW3
Libraries for GLFW3 to use in D programming language.
derelict-GLFW3 3 44.20150730git10a517b.fc28 68784 Unspecified Libraries to use GLFW3
Libraries for GLFW3 to use in D programming language.
derelict-GLFW3-devel 3 44.20150730git10a517b.fc28 26257 Unspecified Header files and libraries for GLFW3
Header files and libraries for GLFW3 to use in D programming language.
derelict-GLFW3-devel 3 44.20150730git10a517b.fc28 26257 Unspecified Header files and libraries for GLFW3
Header files and libraries for GLFW3 to use in D programming language.
derelict-IL 3 44.20150730git10a517b.fc28 100060 Unspecified Libraries to use IL
Libraries for IL to use in D programming language.
derelict-IL 3 44.20150730git10a517b.fc28 99696 Unspecified Libraries to use IL
Libraries for IL to use in D programming language.
derelict-IL-devel 3 44.20150730git10a517b.fc28 41583 Unspecified Header files and libraries for IL
Header files and libraries for IL to use in D programming language.
derelict-IL-devel 3 44.20150730git10a517b.fc28 41583 Unspecified Header files and libraries for IL
Header files and libraries for IL to use in D programming language.
derelict-LUA 3 44.20150730git10a517b.fc28 133380 Unspecified Libraries to use LUA
Libraries for LUA to use in D programming language.
derelict-LUA 3 44.20150730git10a517b.fc28 132728 Unspecified Libraries to use LUA
Libraries for LUA to use in D programming language.
derelict-LUA-devel 3 44.20150730git10a517b.fc28 23735 Unspecified Header files and libraries for LUA
Header files and libraries for LUA to use in D programming language.
derelict-LUA-devel 3 44.20150730git10a517b.fc28 23735 Unspecified Header files and libraries for LUA
Header files and libraries for LUA to use in D programming language.
derelict-ODE 3 44.20150730git10a517b.fc28 403108 Unspecified Libraries to use ODE
Libraries for ODE to use in D programming language.
derelict-ODE 3 44.20150730git10a517b.fc28 403096 Unspecified Libraries to use ODE
Libraries for ODE to use in D programming language.
derelict-ODE-devel 3 44.20150730git10a517b.fc28 99532 Unspecified Header files and libraries for ODE
Header files and libraries for ODE to use in D programming language.
derelict-ODE-devel 3 44.20150730git10a517b.fc28 99532 Unspecified Header files and libraries for ODE
Header files and libraries for ODE to use in D programming language.
derelict-Ogg 3 44.20150730git10a517b.fc28 51844 Unspecified Libraries to use Ogg
Libraries for Ogg to use in D programming language.
derelict-Ogg 3 44.20150730git10a517b.fc28 51768 Unspecified Libraries to use Ogg
Libraries for Ogg to use in D programming language.
derelict-Ogg-devel 3 44.20150730git10a517b.fc28 11265 Unspecified Header files and libraries for Ogg
Header files and libraries for Ogg to use in D programming language.
derelict-Ogg-devel 3 44.20150730git10a517b.fc28 11265 Unspecified Header files and libraries for Ogg
Header files and libraries for Ogg to use in D programming language.
derelict-PHYSFS 3 44.20150730git10a517b.fc28 58132 Unspecified Libraries to use PHYSFS
Libraries for PHYSFS to use in D programming language.
derelict-PHYSFS 3 44.20150730git10a517b.fc28 60488 Unspecified Libraries to use PHYSFS
Libraries for PHYSFS to use in D programming language.
derelict-PHYSFS-devel 3 44.20150730git10a517b.fc28 12420 Unspecified Header files and libraries for PHYSFS
Header files and libraries for PHYSFS to use in D programming language.
derelict-PHYSFS-devel 3 44.20150730git10a517b.fc28 12420 Unspecified Header files and libraries for PHYSFS
Header files and libraries for PHYSFS to use in D programming language.
derelict-PQ 3 44.20150730git10a517b.fc28 91544 Unspecified Libraries to use PQ
Libraries for PQ to use in D programming language.
derelict-PQ 3 44.20150730git10a517b.fc28 91104 Unspecified Libraries to use PQ
Libraries for PQ to use in D programming language.
derelict-PQ-devel 3 44.20150730git10a517b.fc28 17309 Unspecified Header files and libraries for PQ
Header files and libraries for PQ to use in D programming language.
derelict-PQ-devel 3 44.20150730git10a517b.fc28 17309 Unspecified Header files and libraries for PQ
Header files and libraries for PQ to use in D programming language.
derelict-SDL2 3 44.20150730git10a517b.fc28 466764 Unspecified Libraries to use SDL2
Libraries for SDL2 to use in D programming language.
derelict-SDL2 3 44.20150730git10a517b.fc28 455328 Unspecified Libraries to use SDL2
Libraries for SDL2 to use in D programming language.
derelict-SDL2-devel 3 44.20150730git10a517b.fc28 190085 Unspecified Header files and libraries for SDL2
Header files and libraries for SDL2 to use in D programming language.
derelict-SDL2-devel 3 44.20150730git10a517b.fc28 190078 Unspecified Header files and libraries for SDL2
Header files and libraries for SDL2 to use in D programming language.
derelict-SFML2 3 44.20150730git10a517b.fc28 554296 Unspecified Libraries to use SFML2
Libraries for SFML2 to use in D programming language.
derelict-SFML2 3 44.20150730git10a517b.fc28 545248 Unspecified Libraries to use SFML2
Libraries for SFML2 to use in D programming language.
derelict-SFML2-devel 3 44.20150730git10a517b.fc28 123159 Unspecified Header files and libraries for SFML2
Header files and libraries for SFML2 to use in D programming language.
derelict-SFML2-devel 3 44.20150730git10a517b.fc28 123110 Unspecified Header files and libraries for SFML2
Header files and libraries for SFML2 to use in D programming language.
derelict-Vorbis 3 44.20150730git10a517b.fc28 99108 Unspecified Libraries to use Vorbis
Libraries for Vorbis to use in D programming language.
derelict-Vorbis 3 44.20150730git10a517b.fc28 100000 Unspecified Libraries to use Vorbis
Libraries for Vorbis to use in D programming language.
derelict-Vorbis-devel 3 44.20150730git10a517b.fc28 20749 Unspecified Header files and libraries for Vorbis
Header files and libraries for Vorbis to use in D programming language.
derelict-Vorbis-devel 3 44.20150730git10a517b.fc28 20749 Unspecified Header files and libraries for Vorbis
Header files and libraries for Vorbis to use in D programming language.
derelict-devel 3 44.20150730git10a517b.fc28 9858 Unspecified Header files and libraries for derelict
Header files and libraries for derelict to use in D programming language.
derelict-devel 3 44.20150730git10a517b.fc28 9858 Unspecified Header files and libraries for derelict
Header files and libraries for derelict to use in D programming language.
derrick 0.3 11.fc30 36487 Unspecified A Simple Network Stream Recorder
Derrick is a simple tool for recording data streams of TCP and UDP traffic.
It shares similarities with other network recorders, such as tcpflow and
wireshark, where it is more advanced than the first and clearly inferior to
the latter.
Derrick has been specifically designed to monitor application-layer
communication. In contrast to other tools the application data is logged in
a line-based ASCII format. Common UNIX tools, such as grep, sed & awk, can
be directly applied. Even replay of recorded communication is straight
forward using netcat.
Derrick supports on-the-fly compression and rotation of log files. The
payloads of TCP sessions are re-assembled using Libnids and can be merged
or truncated. UDP payloads are logged as-is. Details of lower network
layers are omitted.
desktop-backgrounds-basic 30.0.0 2.fc30 2845132 Unspecified Desktop backgrounds
The desktop-backgrounds-basic package contains artwork intended to be used as
desktop background image.
desktop-backgrounds-compat 30.0.0 2.fc30 0 Unspecified The default Fedora wallpaper for less common DEs
The desktop-backgrounds-compat package contains file-names used
by less common Desktop Environments such as LXDE to set up the
default wallpaper.
desktop-backgrounds-gnome 30.0.0 2.fc30 191 Unspecified The default Fedora wallpaper from GNOME desktop
The desktop-backgrounds-gnome package sets default background in gnome.
desktop-backgrounds-waves 30.0.0 2.fc30 11322749 Unspecified Desktop backgrounds for the Waves theme
The desktop-backgrounds-waves package contains the "Waves" desktop backgrounds
which were used in Fedora 9.
desktop-file-utils 0.23 10.fc30 281973 Unspecified Utilities for manipulating .desktop files
.desktop files are used to describe an application for inclusion in
GNOME or KDE menus. This package contains desktop-file-validate which
checks whether a .desktop file complies with the specification at
http://www.freedesktop.org/standards/, and desktop-file-install
which installs a desktop file to the standard directory, optionally
fixing it up in the process.
detox 1.3.0 7.fc30 212662 Unspecified Utility to replace problematic characters in file names
Detox is a utility designed to clean up file names. It replaces difficult to
work with characters, such as spaces, with standard equivalents. It will also
clean up file names with UTF-8 or Latin-1 (or CP-1252) characters in them.
deutex 5.1.1 3.fc30 307473 Unspecified DOOM wad file manipulator
DeuTex is a wad composer for Doom, Heretic, Hexen and Strife. It can be
used to extract the lumps of a wad and save them as individual files.
Conversely, it can also build a wad from separate files. When extracting
a lump to a file, it does not just copy the raw data, it converts it to
an appropriate format (such as PPM for graphics, Sun audio for samples,
etc.). Conversely, when it reads files for inclusion in pwads, it does
the necessary conversions (for example, from PPM to Doom picture
format). In addition, DeuTex has functions such as merging wads, etc. If
you're doing any wad hacking beyond level editing, DeuTex is a must.
dev86 0.16.21 13.fc30 1251128 Unspecified A real mode 80x86 assembler and linker
The dev86 package provides an assembler and linker for real mode 80x86
instructions. You'll need to have this package installed in order to
build programs that run in real mode, including LILO and the kernel's
bootstrapping code, from their sources.
You should install dev86 if you intend to build programs that run in real
mode from their source code.
devhelp 3.32.0 1.fc30 270459 Unspecified API documentation browser
Devhelp is an API documentation browser for the GNOME desktop.
It works natively with API documentation generated by gtk-doc.
devhelp 3.32.0 1.fc30 267931 Unspecified API documentation browser
Devhelp is an API documentation browser for the GNOME desktop.
It works natively with API documentation generated by gtk-doc.
devhelp-devel 3.32.0 1.fc30 749792 Unspecified Library to embed Devhelp in other applications - Development files
Devhelp is an API documentation browser for the GNOME desktop.
This package contains the development files for the library that can be used
for embedding devhelp into other applications such as IDEs.
devhelp-devel 3.32.0 1.fc30 749794 Unspecified Library to embed Devhelp in other applications - Development files
Devhelp is an API documentation browser for the GNOME desktop.
This package contains the development files for the library that can be used
for embedding devhelp into other applications such as IDEs.
devhelp-libs 3.32.0 1.fc30 968447 Unspecified Library to embed Devhelp in other applications
Devhelp is an API documentation browser for the GNOME desktop.
This package contains a library that can be used for embedding devhelp
into other applications such as IDEs.
devhelp-libs 3.32.0 1.fc30 950343 Unspecified Library to embed Devhelp in other applications
Devhelp is an API documentation browser for the GNOME desktop.
This package contains a library that can be used for embedding devhelp
into other applications such as IDEs.
device-mapper 1.02.154 3.fc30 360540 Unspecified Device mapper utility
This package contains the supporting userspace utility, dmsetup,
for the kernel device-mapper.
device-mapper-devel 1.02.154 3.fc30 135408 Unspecified Development libraries and headers for device-mapper
This package contains files needed to develop applications that use
the device-mapper libraries.
device-mapper-devel 1.02.154 3.fc30 135410 Unspecified Development libraries and headers for device-mapper
This package contains files needed to develop applications that use
the device-mapper libraries.
device-mapper-event 1.02.154 3.fc30 50101 Unspecified Device-mapper event daemon
This package contains the dmeventd daemon for monitoring the state
of device-mapper devices.
device-mapper-event-devel 1.02.154 3.fc30 5288 Unspecified Development libraries and headers for the device-mapper event daemon
This package contains files needed to develop applications that use
the device-mapper event library.
device-mapper-event-devel 1.02.154 3.fc30 5290 Unspecified Development libraries and headers for the device-mapper event daemon
This package contains files needed to develop applications that use
the device-mapper event library.
device-mapper-event-libs 1.02.154 3.fc30 58984 Unspecified Device-mapper event daemon shared library
This package contains the device-mapper event daemon shared library,
libdevmapper-event.
device-mapper-event-libs 1.02.154 3.fc30 60044 Unspecified Device-mapper event daemon shared library
This package contains the device-mapper event daemon shared library,
libdevmapper-event.
device-mapper-libs 1.02.154 3.fc30 499455 Unspecified Device-mapper shared library
This package contains the device-mapper shared library, libdevmapper.
device-mapper-libs 1.02.154 3.fc30 445663 Unspecified Device-mapper shared library
This package contains the device-mapper shared library, libdevmapper.
device-mapper-multipath 0.7.9 6.git2df6110.fc30 311660 Unspecified Tools to manage multipath devices using device-mapper
device-mapper-multipath provides tools to manage multipath devices by
instructing the device-mapper multipath kernel module what to do.
The tools are :
* multipath - Scan the system for multipath devices and assemble them.
* multipathd - Detects when paths fail and execs multipath to update things.
device-mapper-multipath-devel 0.7.9 6.git2df6110.fc30 16383 Unspecified Development libraries and headers for device-mapper-multipath
This package contains the files need to develop applications that use
device-mapper-multipath's lbmpathpersist and libmpathcmd libraries.
device-mapper-multipath-devel 0.7.9 6.git2df6110.fc30 16383 Unspecified Development libraries and headers for device-mapper-multipath
This package contains the files need to develop applications that use
device-mapper-multipath's lbmpathpersist and libmpathcmd libraries.
device-mapper-multipath-libs 0.7.9 6.git2df6110.fc30 1004665 Unspecified The device-mapper-multipath modules and shared library
The device-mapper-multipath-libs provides the path checker
and prioritizer modules. It also contains the libmpathpersist and
libmpathcmd shared libraries, as well as multipath's internal library,
libmultipath.
device-mapper-multipath-libs 0.7.9 6.git2df6110.fc30 1005257 Unspecified The device-mapper-multipath modules and shared library
The device-mapper-multipath-libs provides the path checker
and prioritizer modules. It also contains the libmpathpersist and
libmpathcmd shared libraries, as well as multipath's internal library,
libmultipath.
device-mapper-persistent-data 0.7.6 4.fc30 1852853 Unspecified Device-mapper Persistent Data Tools
thin-provisioning-tools contains check,dump,restore,repair,rmap
and metadata_size tools to manage device-mapper thin provisioning
target metadata devices; cache check,dump,metadata_size,restore
and repair tools to manage device-mapper cache metadata devices
are included and era check, dump, restore and invalidate to manage
snapshot eras
devilspie 0.22 22.fc30 134440 Unspecified A window-matching utility
A window-matching utility, inspired by Sawfish's "Matched Windows" option and
the lack such functionality in Metacity. Devil's Pie can be configured to
detect windows as they are created, and match the window to a set of rules. If
the window matches the rules, it can perform a series of actions on that
window.
devilspie2 0.43 4.fc30 163403 Unspecified A window-matching utility
Devilspie2 is a window matching utility, allowing the user to perform scripted
actions on windows as they are created. For example you can script a terminal
program to always be positioned at a specific screen position, or position a
window on a specific workspace. It is based on the program Devilspie by Ross
Burton.
devio 1.2 18.fc30 45966 Unspecified Read and write utility for block devices
devio is a command line utility intended to read and write on block devices.
The primary difference between devio and other command line utilities, such
as dd and cat, is that it is not stream based - it writes directly into
the object rather than reading and writing a stream of data.
devscripts 2.19.3 1.fc30 1736451 Unspecified Scripts for Debian Package maintainers
Scripts to make the life of a Debian Package maintainer easier.
devscripts-checkbashisms 2.19.3 1.fc30 53262 Unspecified Devscripts checkbashisms script
This package contains the devscripts checkbashisms script.
devtodo 0.1.20 25.fc30 421706 Unspecified Manage a prioritised list of todo items organized by directory
Todo is a program to display and manage a hierarchical, prioritised list of
outstanding work, or just reminders.
The program itself is assisted by a few shell scripts that override default
builtins. Specifically, cd, pushd and popd are overridden so that when using
one of these commands to enter a directory, the todo will display any
outstanding items in that directory.
For much more complete information please refer to the man page (devtodo(1)).
dex 1.0 9.fc30 465171 Unspecified Dextrous text editor
dex is a small and easy to use text editor. Colors and bindings can be
fully customized to your liking. It has some features useful to
programmers, like ctags support and it can parse compiler errors, but
it does not aim to become an IDE.
dex-autostart 0.8.0 5.fc30 29150 Unspecified Generate and execute DesktopEntry files
dex-autostart, DesktopEntry Execution, is a program to generate and execute
DesktopEntry files of the Application type.
dfish 1.3 14.fc30 38205 Unspecified A generic file selection front-end
Daniel's File Selection Hack (dfish) is a generic front-end
for selecting files.
Running dfish will give you a menu with all the files in
the specified directory. When you double-click a file,
an arbitrary command will be run.
dfu-programmer 0.7.2 4.fc30 133990 Unspecified A Device Firmware Update based USB programmer for Atmel chips
A linux based command-line programmer for Atmel chips with a USB
bootloader supporting ISP. This is a mostly Device Firmware Update
(DFU) 1.0 compliant user-space application. Supports all DFU enabled
Atmel chips with USB support.
dfu-util 0.9 7.fc30 155184 Unspecified USB Device Firmware Upgrade tool
USB Device Firmware Upgrade (DFU) is an official USB device class specification
of the USB Implementers Forum. It specifies a vendor and device independent way
of updating the firmware of a USB device. The idea is to have only one
vendor-independent firmware update tool as part of the operating system, which
can then (given a particular firmware image) be downloaded into the device.
In addition to firmware download, it also specifies firmware upload, i.e.
loading the currently installed device firmware to the USB Host.
The DFU specification can be found at:
http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
dfuzzer 1.4 9.fc30 1006584 Unspecified D-Bus fuzz testing tool
Tool for fuzz testing processes communicating through D-Bus. It can be
used to test processes connected to both, the session bus and the system
bus daemon. Dfuzzer works as a client, it first connects to the bus
daemon and then it traverses and fuzz tests all the methods provided
by a D-Bus service.
dgae 1.1 20.fc30 23637 Unspecified DG, a short AGI adventure game
Help DG to seek out his twin brother's stick.
This game is a public domain: you can look out the codes and make your own
AGI game.
dgc 0.98 18.fc29 1565782 Applications/Engineering Digital Gate Compiler
DGC is a tool for the creation of digital netlists. DGC does an optimization
and technology mapping for an abstract description of boolean functions and
state machines. Output formats are EDIF, XNF and VHDL.
Input formats are KISS, PLA and others.
dgc 0.98 18.fc29 1503670 Applications/Engineering Digital Gate Compiler
DGC is a tool for the creation of digital netlists. DGC does an optimization
and technology mapping for an abstract description of boolean functions and
state machines. Output formats are EDIF, XNF and VHDL.
Input formats are KISS, PLA and others.
dgc-devel 0.98 18.fc29 0 Development/Libraries Library for dgc package
The dgc-devel package contains the shared library
for dgc package.
dgc-devel 0.98 18.fc29 0 Development/Libraries Library for dgc package
The dgc-devel package contains the shared library
for dgc package.
dgit 8.4 1.fc30 441261 Unspecified Integration between git and Debian-style archives
dgit (with the associated infrastructure) makes it possible to
treat the Debian archive as a git repository:
"dgit push" constructs uploads from git commits
"dgit clone" and "dgit fetch" construct git commits from uploads.
dh-autoreconf 19 4.fc30 19282 Unspecified debhelper add-on to call autoreconf and clean up after the build
dh-autoreconf provides a debhelper sequence addon named 'autoreconf' and two
commands, dh_autoreconf and dh_autoreconf_clean.
* The dh_autoreconf command creates a list of the files and their checksums,
calls autoreconf and then creates a second list for the new files.
* The dh_autoreconf_clean command compares these two lists and removes all
files which have been added or changed (files may be excluded if needed).
For CDBS users, a rule is provided to call the dh-autoreconf programs at the
right time.
dh-make 2.201801 2.fc30 76828 Unspecified Tool that converts source archives into Debian package source
This package allows you to take a standard (or upstream) source
package and convert it into a format that will allow you to build
Debian packages.
dhcp-client 4.3.6 32.fc30 576511 Unspecified Provides the ISC DHCP client daemon and dhclient-script
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.
This package provides the ISC DHCP client.
dhcp-common 4.3.6 32.fc30 301814 Unspecified Common files used by ISC dhcp client, server and relay agent
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.
This package provides common files used by dhcp and dhclient package.
dhcp-compat 4.3.6 32.fc30 0 Unspecified Utility package to help transition
This package only exists to help transition dhcp users to the new
package split (dhcp -> dhcp & dhcrelay).
It will be removed after one distribution release cycle, please
do not reference it or depend on it in any way.
dhcp-devel 4.3.6 32.fc30 96323 Unspecified Development headers and libraries for interfacing to the DHCP server
Header files and API documentation for using the ISC DHCP libraries. The
libdhcpctl and libomapi static libraries are also included in this package.
dhcp-devel 4.3.6 32.fc30 96323 Unspecified Development headers and libraries for interfacing to the DHCP server
Header files and API documentation for using the ISC DHCP libraries. The
libdhcpctl and libomapi static libraries are also included in this package.
dhcp-devel-doc 4.3.6 32.fc30 42963139 Unspecified Developer's Guide for ISC DHCP
This documentation is intended for developers, contributors and other
programmers that are interested in internal operation of the code.
This package contains doxygen-generated documentation.
dhcp-forwarder 0.11 8.fc30 172874 Unspecified DHCP relay agent
dhcp-fwd forwards DHCP messages between subnets with different sublayer
broadcast domains. It is similar to the DHCP relay agent dhcrelay of
ISC's DHCP, but has the following important features:
* Runs as non-root in a chroot-environment
* Uses AF_INET sockets which makes it possible to filter incoming
messages with packetfilters
* The DHCP agent IDs can be defined freely
* Has a small memory footprint when using dietlibc
dhcp-libs 4.3.6 32.fc30 219308 Unspecified Shared libraries used by ISC dhcp client and server
This package contains shared libraries used by ISC dhcp client and server
dhcp-libs 4.3.6 32.fc30 210024 Unspecified Shared libraries used by ISC dhcp client and server
This package contains shared libraries used by ISC dhcp client and server
dhcp-relay 4.3.6 32.fc30 396700 Unspecified Provides the ISC DHCP relay agent
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.
This package provides the ISC DHCP relay agent.
dhcp-server 4.3.6 32.fc30 1370620 Unspecified Provides the ISC DHCP server
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.
This package provides the ISC DHCP server.
dhcpcd 6.11.3 8.fc30 427563 Unspecified A minimalistic network configuration daemon with DHCPv4, rdisc and DHCPv6 support
The dhcpcd package provides a minimalistic network configuration daemon
that supports IPv4 and IPv6 configuration including configuration discovery
through NDP, DHCPv4 and DHCPv6 protocols.
dhcping 1.2 22.fc30 39252 Unspecified DHCP daemon ping program
Dhcping allows the system administrator to check if a remote DHCP
server is still functioning.
dhex 0.69 1.fc30 146250 Unspecified Ncurses based hexadecimal editor with a diff mode
DHEX is a more than just another hex editor: It includes a diff mode, which
can be used to easily and conveniently compare two binary files. Since it is
based on ncurses and is themeable, it can run on any number of systems and
scenarios. With its utilization of search logs, it is possible to track
changes in different iterations of files easily.
dia 0.97.3 11.fc30 19207570 Unspecified Diagram drawing program
The Dia drawing program can be used to draw different types of diagrams, and
includes support for UML static structure diagrams (class diagrams),
entity relationship modeling, and network diagrams. Dia can load and
save diagrams to a custom file format, can load and save in .xml format,
and can export to PostScript(TM).
dia-CMOS 0.1 14.fc30 26078 Unspecified Dia CMOS Shapes
The following shapes are included in the package:
* NMOS Transistor
* PMOS Transistor
* Ground
* Vdd
dia-Digital 0.1 14.fc30 43554 Unspecified Dia Digital IC logic shapes
The following shapes are included in the package:
* Buffer
* Inverter
* AND
* NAND
* OR
* NOR
* XOR
* XNOR
* Multiplexer/Demultiplexer
* Adder/Subtractor/Multiplier/Divider
* Register
* Connection Point
dia-electric2 0.1 14.fc30 25125 Unspecified Dia Digital IC logic shapes
The following shapes are included in the package:
* CKT Breaker
* Generator
* Isolator
* Transformer
dia-electronic 0.1 14.fc30 76256 Unspecified Dia Digital IC logic shapes
The following shapes are included in the package:
* Antenna
* Bell
* Button
* Capacitor
* Electrolytic capacitor
* Crystal
* Di-Gate
* Diac
* Engine
* Headphone
* Inverse diode
* Schottky diode
* Tunnel diode
* Zenner diode
* Inductor
* LED display
* Microphone
* Photo-emiting part
* Photosensitive part
* Potenciometer
* Ground
* Contact
* Contact Pair
* IN Port
* OUT Port
* IN/OUT Port
* Voltmeter
* Ampermeter
* Source or Meter
* Current source
* Substitute linearised source
* Voltage source
* Alternating voltage source
* Direct voltage source
* Bipolar transistor NPN
* Bipolar transistor NPN
* Bipolar transistor PNP
* Bipolar transistor PNP
* JFE transitor - N
* JFE transistor - P
* MISFE conducting transistor - N
* MISFE conducting transistor - P
* MISFE inducting transistor - N
* MISFE inducting transistor - P
* Single ..... transistor
* Triac
* Diode tyristor, blocking
* Triode tyristor, blocking
* Vacuum diode
* Vacuum pentode
* Vacuum triode
* Linear variable part
* Nonlinear variable part
* Varicap
dia-gnomeDIAicons 0.1 5.fc21 517071 Unspecified Beautiful icon set for dia diagram editor
A collection of gnome network icons adapted to Dia
dia-optics 0.1 14.fc30 57528 Unspecified Dia Optics shapes
The following shapes are included in the package:
* Polarisation Controller
* Directional Coupler
* Tuneable Coupler
* DFB Laser
* Long Fibre
* Detector
* Osilloscope
* Spectrum Analyser
* Optical Isolator
* EDFA
* Variable Attenuator
* MZ Modulator
* Phase Modulator
* Sine Wave Source
* Square Wave Source
* Long Period Grating
* Light Beam
* Wave
dialog 1.3 16.20180621.fc30 661513 Unspecified A utility for creating TTY dialog boxes
Dialog is a utility that allows you to show dialog boxes (containing
questions or messages) in TTY (text mode) interfaces. Dialog is called
from within a shell script. The following dialog boxes are implemented:
yes/no, menu, input, message, text, info, checklist, radiolist, and
gauge.
Install dialog if you would like to create TTY dialog boxes.
dialog 1.3 16.20180621.fc30 649213 Unspecified A utility for creating TTY dialog boxes
Dialog is a utility that allows you to show dialog boxes (containing
questions or messages) in TTY (text mode) interfaces. Dialog is called
from within a shell script. The following dialog boxes are implemented:
yes/no, menu, input, message, text, info, checklist, radiolist, and
gauge.
Install dialog if you would like to create TTY dialog boxes.
dialog-devel 1.3 16.20180621.fc30 84303 Unspecified Development files for building applications with the dialog library
Dialog is a utility that allows you to show dialog boxes (containing
questions or messages) in TTY (text mode) interfaces. This package
contains the files needed for developing applications, which use the
dialog library.
dialog-devel 1.3 16.20180621.fc30 84303 Unspecified Development files for building applications with the dialog library
Dialog is a utility that allows you to show dialog boxes (containing
questions or messages) in TTY (text mode) interfaces. This package
contains the files needed for developing applications, which use the
dialog library.
dianara 1.4.2 2.fc30 2726170 Unspecified Pump.io application for the desktop
Dianara is a pump.io client, a desktop application that allows users
to manage their Pump.io social networking accounts without the need
to use a web browser, and provides many features not available
in the standard web interface.
diaser 1.1.0 16.fc30 594996 Unspecified Geo-data replication long-term archive system (WAN vault)
An advanced disk based backup volume accumulator, replication and management
system for HE and SME. A quick and low-cost way to make an environment more
robust and data more accessible by archiving in multiple places. This
replication also provides fast retrieval of archived data from all node
hosting locations. A Perl installer creates the system. Nodes can be dedicated
to storage or used for existing services over unused bandwidth. DIASER works
in user space over SSH. The software is based on DIAP/LTASP which is a storage
architecture designed to structure months to years of long term sustainable
archiving space including retrospective archiving.
dib-utils 0.0.9 10.fc30 5323 Unspecified Pieces of diskimage-builder that are useful standalone
Pieces of diskimage-builder that are useful standalone.
This allows them to be used without pulling in all of
diskimage-builder and its dependencies.
dibbler-client 1.0.1 9.fc30 1410194 Unspecified Dibbler, DHCPv6 client
Dibbler is a portable DHCPv6 implementation. It supports stateful (i.e. IPv6
address granting and IPv6 prefix delegation) as well as stateless (i.e. option
granting) autoconfiguration for IPv6.
This package contains DHCPv6 client.
dibbler-docs 1.0.1 9.fc30 1316177 Unspecified Dibbler documentation
Dibbler is a portable DHCPv6 implementation. It supports stateful (i.e. IPv6
address granting and IPv6 prefix delegation) as well as stateless (i.e. option
granting) autoconfiguration for IPv6.
This package contains dibbler documentation.
dibbler-relay 1.0.1 9.fc30 480233 Unspecified Dibbler, DHCPv6 relay
Dibbler is a portable DHCPv6 implementation. It supports stateful (i.e. IPv6
address granting and IPv6 prefix delegation) as well as stateless (i.e. option
granting) autoconfiguration for IPv6.
This package contains DHCPv6 relay.
dibbler-requestor 1.0.1 9.fc30 299128 Unspecified Dibbler, DHCPv6 request generator
Dibbler is a portable DHCPv6 implementation. It supports stateful (i.e. IPv6
address granting and IPv6 prefix delegation) as well as stateless (i.e. option
granting) autoconfiguration for IPv6.
This package contains DHCPv6 request generator.
dibbler-server 1.0.1 9.fc30 1556418 Unspecified Dibbler, DHCPv6 server
Dibbler is a portable DHCPv6 implementation. It supports stateful (i.e. IPv6
address granting and IPv6 prefix delegation) as well as stateless (i.e. option
granting) autoconfiguration for IPv6.
This package contains DHCPv6 server.
diceware 0.9.5 2.fc30 476828 Unspecified Create passphrases which one can remember
A simple command line tool which can create simple passphrases
which human can remember.
diceware-doc 0.9.5 2.fc30 8754689 Unspecified Documentation for Diceware
Diceware is a simple command line tool which can create simple
passphrases which human can remember.
This package provides documentation for Diceware.
dictd 1.12.1 23.fc30 414373 Unspecified DICT protocol (RFC 2229) server and command-line client
Command-line client for the DICT protocol. The Dictionary Server
Protocol (DICT) is a TCP transaction based query/response protocol that
allows a client to access dictionary definitions from a set of natural
language dictionary databases.
dictd-server 1.12.1 23.fc30 916017 Unspecified Server for the Dictionary Server Protocol (DICT)
A server for the DICT protocol. You need to install dictd-usable databases
before you can use this server. Those can be found p.e. at
ftp://ftp.dict.org/pub/dict/pre/
More information can be found in the INSTALL file in this package.
diction 1.11 19.fc30 257096 Unspecified Identifies diction and style errors
Diction and style are two old standard UNIX commands. Diction identifies wordy
and commonly misused phrases. Style analyses surface characteristics of a
document, including sentence length and other readability measures.
These programs cannot help you structure a document well, but they can help to
avoid poor wording and compare the readability (not the understandability!) of
your documents with others. Both commands support English and German documents.
did 0.12 3.fc30 406844 Unspecified What did you do last week, month, year?
Comfortably gather status report data (e.g. list of committed
changes) for given week, month, quarter, year or selected date
range. By default all available stats for this week are reported.
dieharder 3.31.1 23.fc30 946643 Unspecified Random number generator tester and timer
dieharder is a fairly involved random number/uniform deviate generator
tester. It can either test any of its many pre-built and linked
generators (basically all of those in the Gnu Scientific Library plus
some others) or a potentially random data-set in a file. With file
input, it can manage either a variety of ASCII-formatted input or a raw
binary bit string. It is thus suitable for use in testing both software
RNG's and hardware RNG's.
dieharder does all of its work with a standalone, extensible library,
libdieharder. Therefore its tests can be integrated into other programs.
dieharder encapsulates following random number tests: George Marsaglia's
"Diehard" battery of tests, STS (v1.6) from NIST FIPS, Knuth's tests,
and more. Check the documentation for complete list of the tests and
references where possible. It is intended to be the "Swiss army knife of
random number testers", or "the last suite of random number testers
you'll ever wear".
dieharder 3.31.1 23.fc30 948607 Unspecified Random number generator tester and timer
dieharder is a fairly involved random number/uniform deviate generator
tester. It can either test any of its many pre-built and linked
generators (basically all of those in the Gnu Scientific Library plus
some others) or a potentially random data-set in a file. With file
input, it can manage either a variety of ASCII-formatted input or a raw
binary bit string. It is thus suitable for use in testing both software
RNG's and hardware RNG's.
dieharder does all of its work with a standalone, extensible library,
libdieharder. Therefore its tests can be integrated into other programs.
dieharder encapsulates following random number tests: George Marsaglia's
"Diehard" battery of tests, STS (v1.6) from NIST FIPS, Knuth's tests,
and more. Check the documentation for complete list of the tests and
references where possible. It is intended to be the "Swiss army knife of
random number testers", or "the last suite of random number testers
you'll ever wear".
dieharder-devel 3.31.1 23.fc30 339677 Unspecified A library of random number generator tests and timing routines
Development files for dieharder
dieharder-devel 3.31.1 23.fc30 339677 Unspecified A library of random number generator tests and timing routines
Development files for dieharder
dieharder-libs 3.31.1 23.fc30 563593 Unspecified A library of random number generator tests and timing routines
libdieharder is the core library of dieharder designed to be "the last
suite of random number testers you'll ever wear". It can test any of
its many pre-built and library linked generators (basically all of those
in the Gnu Scientific Library plus a number of others from various
sources) or a potentially random data-set in either an ASCII-formatted
or raw (presumed 32 bit unsigned int) binary file. It is fairly
straightforward to wrap new software generators for testing, or to add
hardware generators that have a software interface for testing, and the
file input method permits pretty much any software or hardware RNG to be
tested using libdieharder calls.
libdieharder has as a design goal the full encapsulation in an
extensible shell of basically all the random number tests: George
Marsaglia's "Diehard" battery of tests, STS (v1.6) from NIST FIPS,
Knuth's tests, and more. Check the documentation for complete list.
dieharder-libs 3.31.1 23.fc30 590041 Unspecified A library of random number generator tests and timing routines
libdieharder is the core library of dieharder designed to be "the last
suite of random number testers you'll ever wear". It can test any of
its many pre-built and library linked generators (basically all of those
in the Gnu Scientific Library plus a number of others from various
sources) or a potentially random data-set in either an ASCII-formatted
or raw (presumed 32 bit unsigned int) binary file. It is fairly
straightforward to wrap new software generators for testing, or to add
hardware generators that have a software interface for testing, and the
file input method permits pretty much any software or hardware RNG to be
tested using libdieharder calls.
libdieharder has as a design goal the full encapsulation in an
extensible shell of basically all the random number tests: George
Marsaglia's "Diehard" battery of tests, STS (v1.6) from NIST FIPS,
Knuth's tests, and more. Check the documentation for complete list.
diet 2.10 4.fc29 8239377 Unspecified A computational servers toolkit
DIET is a grid middleware that implements the Grid-RPC model.
diet 2.10 4.fc29 8576317 Unspecified A computational servers toolkit
DIET is a grid middleware that implements the Grid-RPC model.
diet-devel 2.10 4.fc29 246944 Unspecified Development files for diet
The diet-devel package contains libraries and header files for
developing applications that use diet.
diet-devel 2.10 4.fc29 246986 Unspecified Development files for diet
The diet-devel package contains libraries and header files for
developing applications that use diet.
diet-doc 2.10 4.fc29 2728190 Unspecified Documentation for diet
The diet-doc package contains documentation for
developing applications that use diet.
diet-examples 2.10 4.fc29 1188979 Unspecified Examples for diet
The diet-examples package contains samples applications
that use diet.
dietlibc 0.34 2.fc30 187655 Unspecified Small libc implementation
The diet libc is a libc that is optimized for small size. It can be
used to create small statically linked binaries for Linux on alpha,
arm, hppa, ia64, i386, mips, s390, sparc, sparc64, ppc and x86_64.
dietlibc-devel 0.34 2.fc30 5647840 Unspecified dietlibc development files
The diet libc is a libc that is optimized for small size. It can be
used to create small statically linked binaries for Linux on alpha,
arm, hppa, ia64, i386, mips, s390, sparc, sparc64, ppc and x86_64.
This package contains the object files for dietlibc.
dietlibc-devel 0.34 2.fc30 7189190 Unspecified dietlibc development files
The diet libc is a libc that is optimized for small size. It can be
used to create small statically linked binaries for Linux on alpha,
arm, hppa, ia64, i386, mips, s390, sparc, sparc64, ppc and x86_64.
This package contains the object files for dietlibc.
diffmark 0.10 19.fc30 174052 Unspecified XML diff and merge
This is a XML diff and merge package. It consists of a shared library and
two utilities: dm and dm-merge.
diffmark 0.10 19.fc30 185844 Unspecified XML diff and merge
This is a XML diff and merge package. It consists of a shared library and
two utilities: dm and dm-merge.
diffmark-devel 0.10 19.fc30 15756 Unspecified Development files for diffmark library
Header files and libraries for developing applications that use diffmark.
diffmark-devel 0.10 19.fc30 15756 Unspecified Development files for diffmark library
Header files and libraries for developing applications that use diffmark.
diffoscope 111 1.fc30 1070850 Unspecified In-depth comparison of files, archives, and directories
diffoscope will try to get to the bottom of what makes files or directories
different. It will recursively unpack archives of many kinds and transform
various binary formats into more human readable form to compare them. It can
compare two tarballs, ISO images, or PDF just as easily. The differences can
be shown in a text or HTML report.
diffoscope is developed as part of the "reproducible builds" Debian project and
was formerly known as "debbindiff".
diffpdf 2.1.3 16.fc30 604297 Unspecified PDF files comparator
DiffPDF is used to compare two PDF files. By default the comparison is
of the text on each pair of pages, but comparing the appearance of pages
is also supported (for example, if a diagram is changed or a paragraph
reformatted). It is also possible to compare particular pages or page
ranges.
diffstat 1.62 2.fc30 75499 Unspecified A utility which provides statistics based on the output of diff
The diff command compares files line by line. Diffstat reads the
output of the diff command and displays a histogram of the insertions,
deletions and modifications in each file. Diffstat is commonly used
to provide a summary of the changes in large, complex patch files.
Install diffstat if you need a program which provides a summary of the
diff command's output.
diffuse 0.4.8 9.fc30 1198286 Unspecified Graphical tool for merging and comparing text files
Diffuse is a graphical tool for merging and comparing text files. Diffuse is
able to compare an arbitrary number of files side-by-side and gives users the
ability to manually adjust line-matching and directly edit files. Diffuse can
also retrieve revisions of files from Bazaar, CVS, Darcs, Git, Mercurial,
Monotone, RCS, Subversion, and SVK repositories for comparison and merging.
diffutils 3.7 2.fc30 1775938 Unspecified A GNU collection of diff utilities
Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
compares two files and shows the differences, line by line. The cmp
command shows the offset and line numbers where two files differ, or
cmp can show the characters that differ between the two files. The
diff3 command shows the differences between three files. Diff3 can be
used when two people have made independent changes to a common
original; diff3 can produce a merged file that contains both sets of
changes and warnings about conflicts. The sdiff command can be used
to merge two files interactively.
Install diffutils if you need to compare text files.
digikam 6.0.0 5.fc30 153233401 Unspecified A digital camera accessing & photo management application
digiKam is an easy to use and powerful digital photo management application,
which makes importing, organizing and manipulating digital photos a "snap".
An easy to use interface is provided to connect to your digital camera,
preview the images and download and/or delete them.
digiKam built-in image editor makes the common photo correction a simple task.
digikam-doc 6.0.0 5.fc30 0 Unspecified Application handbooks
Application handbooks.
digikam-libs 6.0.0 5.fc30 40408260 Unspecified Runtime libraries for digikam
Runtime libraries for digikam.
digikam-libs 6.0.0 5.fc30 39626240 Unspecified Runtime libraries for digikam
Runtime libraries for digikam.
digitemp 3.6.0 20.fc30 384235 Unspecified Dallas Semiconductor 1-wire device reading console application
DigiTemp is a simple to use console application for reading values from
Dallas Semiconductor 1-wire devices. Its main use is for reading temperature
sensors, but it also reads counters and understands the 1-wire hubs with
devices on different branches of the network. DigiTemp now supports the
following 1-wire temperature sensors: DS18S20 (and DS1820), DS18B20, DS1822,
the DS2438 Smart Battery Monitor, DS2422 and DS2423 Counters, DS2409
MicroLAN Coupler (used in 1-wire hubs) and the AAG TAI-8540 humidity sensor.
dillo 3.0.5 5.fc30 2245204 Unspecified Very small and fast GUI web browser
Dillo is a very small and fast web browser using GTK.
Currently: no frames,https,javascript.
din 5.2.1 11.fc27 875917 Applications/Multimedia A musical instrument using multiple Bezier curves
din is a software musical instrument and audio synthesizer. Bezier
curves are used to draw and sculpt waveforms, create gating and
modulation (FM and AM) patterns, and create delay feedback and volume
patterns. You can also create an unlimited number of drones and sculpt
their waveforms. It uses JACK to output audio, and supports MIDI, OSC
and IRC bot for input. din can be extended and customized with Tcl/Tk
scripts.
dino 0.0 0.6.20190316.git.330649a.fc30 3936791 Unspecified Modern XMPP ("Jabber") Chat Client using GTK+/Vala
A modern XMPP ("Jabber") chat client using GTK+/Vala.
dino 0.0 0.6.20190316.git.330649a.fc30 3611191 Unspecified Modern XMPP ("Jabber") Chat Client using GTK+/Vala
A modern XMPP ("Jabber") chat client using GTK+/Vala.
dino-devel 0.0 0.6.20190316.git.330649a.fc30 623132 Unspecified Development files for dino
Development files for dino.
dino-devel 0.0 0.6.20190316.git.330649a.fc30 623132 Unspecified Development files for dino
Development files for dino.
dionaea 0.7.0 5.fc30.1 485424 Unspecified Low interaction honeypot
Dionaea honeypot is meant to be a nepenthes successor, embedding python
as scripting language, using libemu to detect shell-codes, supporting
ipv6 and TLS.
dionaea-doc 0.7.0 5.fc30.1 1148167 Unspecified Documentation for the dionaea honeypot package
This is documentation for the dionaea honeypot package.
Dionaea honeypot is meant to be a nepenthes successor, embedding python
as scripting language, using libemu to detect shell-codes, supporting
ipv6 and TLS.
dippi 2.7.1 2.fc30 641243 Unspecified Calculate display info like DPI and aspect ratio
Analyze any display. Input a few simple details and figure out the
aspect ratio, DPI, and other details of a particular display. Great for
deciding which laptop or external monitor to purchase, and if it would
be considered HiDPI.
Handy features:
- Find out if a display is a good choice based on its size and resolution
- Get advice about different densities
- Differentiates between laptops and desktop displays
- Stupid simple: all in a cute li'l window
directory-project 35 7.fc30 40572 Unspecified Apache Directory Project Root pom
The Apache Directory Project provides directory solutions
entirely written in Java. These include a directory server,
which has been certified as LDAP v3 compliant by the
Open Group (Apache Directory Server), and Eclipse-based
directory tools (Apache Directory Studio).
direnv 2.12.2 1.fc28 2334651 Unspecified Environment variable switcher for the shell
direnv is an environment switcher for the shell. It knows how to hook
into bash, zsh, tcsh and fish shell to load or unload environment
variables depending on the current directory. This allows
project-specific environment variables without cluttering the
"~/.profile" file.
direwolf 1.5 1.fc30 1589133 Unspecified Sound Card-based AX.25 TNC
Dire Wolf is a modern software replacement for the old 1980's style
TNC built with special hardware. Without any additional software, it
can perform as an APRS GPS Tracker, Digipeater, Internet Gateway
(IGate), APRStt gateway. It can also be used as a virtual TNC for
other applications such as APRSIS32, UI-View32, Xastir, APRS-TW, YAAC,
UISS, Linux AX25, SARTrack, RMS Express, BPQ32, Outpost PM, and many
others.
direwolf-doc 1.5 1.fc30 18254206 Unspecified Documentation for Dire Wolf
Dire Wolf is a modern software replacement for the old 1980's style
TNC built with special hardware. Without any additional software, it
can perform as an APRS GPS Tracker, Digipeater, Internet Gateway
(IGate), APRStt gateway. It can also be used as a virtual TNC for
other applications such as APRSIS32, UI-View32, Xastir, APRS-TW, YAAC,
UISS, Linux AX25, SARTrack, RMS Express, BPQ32, Outpost PM, and many
others.
dirsplit 1.1.11 41.fc30 35726 Unspecified Utility to split directories
This utility is used to split directories into chunks before burning.
Chunk size is usually set to fit to a CD/DVD.
dirvish 1.2.1 19.fc30 151334 Unspecified Fast, disk based, rotating network backup system
Dirvish is a fast, disk based, rotating network backup system. With dirvish you
can maintain a set of complete images of your filesystems with unattended
creation and expiration. A dirvish backup vault is like a time machine for your
data.
discord-irc 2.6.1 3.fc30 50794 Unspecified Connects Discord and IRC channels by sending messages back and forth
Connects Discord and IRC channels by sending messages back and forth.
discount 2.2.4 2.fc30 117258 Unspecified A command-line utility for converting Markdown files into HTML
DISCOUNT is an implementation of John Gruber's Markdown language in C.
It includes all of the original Markdown features, along with a few
extensions, and passes the Markdown test suite.
diskimage-builder 1.26.1 8.fc30 621717 Unspecified Image building tools for OpenStack
Components of TripleO that are responsible for building disk images.
disktype 9 28.fc30 132136 Unspecified Detect the content format of a disk or disk image
The purpose of disktype is to detect the content format of a disk or disk
image. It knows about common file systems, partition tables, and boot codes.
dislocker 0.7.1 12.fc30 61616 Unspecified Utility to access BitLocker encrypted volumes
Dislocker has been designed to read BitLocker encrypted partitions ("drives")
under a Linux system. The driver has the capability to read/write partitions
encrypted using Microsoft Windows Vista, 7, 8, 8.1 and 10 (AES-CBC, AES-XTS,
128 or 256 bits, with or without the Elephant diffuser, encrypted partitions);
BitLocker-To-Go encrypted partitions (USB/FAT32 partitions).
The file name where the BitLocker encrypted partition will be decrypted needs
to be given. This may take a long time, depending on the size of the encrypted
partition. But afterward, once the partition is decrypted, the access to the
NTFS partition will be faster than with FUSE. Another thing to think about is
the size of the disk (same size as the volume that is tried to be decrypted).
Nevertheless, once the partition is decrypted, the file can be mounted as any
NTFS partition and won't have any link to the original BitLocker partition.
dislocker-libs 0.7.1 12.fc30 207696 Unspecified Libraries for applications using dislocker
The dislocker-libs package provides the essential shared libraries for any
dislocker client program or interface.
dislocker-libs 0.7.1 12.fc30 201880 Unspecified Libraries for applications using dislocker
The dislocker-libs package provides the essential shared libraries for any
dislocker client program or interface.
disper 0.3.1 15.fc30 491085 Unspecified On-the-fly display switch utility
Disper is an on-the-fly display switch utility. It is intended to be used just
before giving a presentation with a laptop, when all one wants is that the
beamer, which has just been connected, is able to show whatever you prepared.
Disper gives you the option to either clone all detected displays, or extend
the desktop to them. Resolutions are automatically detected. For cloning, the
highest common resolution supported by all displays is chosen; for extending
every display device gets its highest supported resolution. For special setups
requiring more detailed control, one can still use the standard display
configuration utilities.
At the moment nVidia cards are supported, and a basic XRandR backend is in
place.
disruptor 3.3.6 6.fc30 112596 Unspecified Concurrent Programming Framework
A High Performance Inter-Thread Messaging Library.
disruptor-javadoc 3.3.6 6.fc30 2264234 Unspecified Javadoc for disruptor
This package contains javadoc for disruptor.
disruptor-thrift-server 0.3.8 7.fc30 60768 Unspecified Thrift Server implementation backed by LMAX Disruptor
Thrift Server implementation backed by LMAX Disruptor.
Shows better throughput/latency characteristics than build-in
THsHa and TThreadedSelector servers.
disruptor-thrift-server-javadoc 0.3.8 7.fc30 666841 Unspecified Javadoc for disruptor-thrift-server
This package contains javadoc for disruptor-thrift-server.
dist-git 1.10 1.fc30 60682 Unspecified Package source version control system
Dist Git is a remote Git repository specifically designed to hold RPM
package sources.
dist-git-selinux 1.10 1.fc30 364890 Unspecified SELinux support for dist-git
Dist Git is a remote Git repository specifically designed to hold RPM
package sources.
This package includes SELinux support.
distcc 3.2rc1 22.fc30 1770316 Unspecified Distributed C/C++ compilation
distcc is a program to distribute compilation of C or C++ code across
several machines on a network. distcc should always generate the same
results as a local compile, is simple to install and use, and is often
two or more times faster than a local compile.
distcc-gnome 3.2rc1 22.fc30 101696 Unspecified Gnome frontend of distcc monitoring tool
This package contains the Gnome frontend of the distcc monitoring tool.
distcc-server 3.2rc1 22.fc30 260205 Unspecified Server for distributed C/C++ compilation
This package contains the compilation server needed to use distcc.
distgen 1.3 1.fc30 128790 Unspecified Templating system/generator for distributions
Based on given template specification (configuration for template), template
file and preexisting distribution metadata generate output file.
distribution-gpg-keys 1.30 1.fc30 268239 Unspecified GPG keys of various Linux distributions
GPG keys used by various Linux distributions to sign packages.
distribution-gpg-keys-copr 1.30 1.fc30 15553968 Unspecified GPG keys for Copr projects
GPG keys used by Copr projects.
distro-info 0.18 3.fc30 86536 Unspecified Provides information about releases of Debian and Ubuntu
Information about all releases of Debian and Ubuntu. The distro-info script
will give you the codename for e.g. the latest stable release of your
distribution. To get information about a specific distribution there are the
debian-distro-info and the ubuntu-distro-info scripts.
distro-info-data 0.38 2.fc30 3711 Unspecified Information about releases of Debian and Ubuntu (data files)
Information about all releases of Debian and Ubuntu. The distro-info script
will give you the codename for e.g. the latest stable release of your
distribution. To get information about a specific distribution there are the
debian-distro-info and the ubuntu-distro-info scripts.
This package contains the data files.
ditaa 0.10 7.fc30 97263 Unspecified Diagrams Through ASCII Art
ditaa is a small command-line utility written in Java, that can
convert diagrams drawn using ASCII art ('drawings' that contain
characters that resemble lines like | / - ), into proper bitmap
graphics.
diveintopython 5.4 34.fc29 0 Documentation Dive into Python - a python book
Dive Into Python is a Python book for experienced programmers.
diveintopython-html 5.4 34.fc29 2644266 Documentation Dive into Python - a python book
Dive Into Python is a Python book for experienced programmers.
The html version
diveintopython-pdf 5.4 34.fc29 1796439 Documentation Dive into Python - a python book
Dive Into Python is a Python book for experienced programmers.
The PDF version
diveintopython-single-html 5.4 34.fc29 1759377 Documentation Dive into Python - a python book
Dive Into Python is a Python book for experienced programmers.
The single html page version
diveintopython-txt 5.4 34.fc29 926072 Documentation Dive into Python - a python book
Dive Into Python is a Python book for experienced programmers.
The text version
djmount 0.71 16.fc28 202732 Applications/Multimedia Mount MediaServers content as a Linux file system
djmount is a UPnP AV client. It mounts as a Linux file system the media content
of compatible UPnP AV devices. Djmount discovers automatically all UPnP AV
Media Servers on the network, and make the content available in a directory
tree. All shared files (e.g. Audio or Video files) are directly visible and
can be played using your favorite media player.
djview4 4.10.6 11.fc30 2187622 Unspecified DjVu viewer
DjView4 is a DjVu document viewer with the following features:
o continuous scrolling of pages
o side-by-side display of pages
o display thumbnails as a grid
o display outlines
o page names supported
o metadata dialog
It is based on DjVuLibre and Qt5.
djview4-plugin 4.10.6 11.fc30 53864 Unspecified Browser plugin for DjVu viewer
This package provides a browser plugin for the DjVu document viewer.
djvulibre 3.5.27 11.fc30 1791652 Unspecified DjVu viewers, encoders, and utilities
DjVu is a web-centric format and software platform for distributing documents
and images. DjVu can advantageously replace PDF, PS, TIFF, JPEG, and GIF for
distributing scanned documents, digital documents, or high-resolution pictures.
DjVu content downloads faster, displays and renders faster, looks nicer on a
screen, and consume less client resources than competing formats. DjVu images
display instantly and can be smoothly zoomed and panned with no lengthy
re-rendering.
DjVuLibre is a free (GPL'ed) implementation of DjVu, including viewers,
decoders, simple encoders, and utilities. The browser plugin is in its own
separate sub-package.
djvulibre-devel 3.5.27 11.fc30 2544300 Unspecified Development files for DjVuLibre
Development files for DjVuLibre.
djvulibre-devel 3.5.27 11.fc30 2544304 Unspecified Development files for DjVuLibre
Development files for DjVuLibre.
djvulibre-libs 3.5.27 11.fc30 2187171 Unspecified Library files for DjVuLibre
Library files for DjVuLibre.
djvulibre-libs 3.5.27 11.fc30 2089531 Unspecified Library files for DjVuLibre
Library files for DjVuLibre.
dkms 2.6.1 3.fc30 223915 Unspecified Dynamic Kernel Module Support Framework
This package contains the framework for the Dynamic Kernel Module Support (DKMS)
method for installing module RPMS as originally developed by Dell.
dl 0.17.1 6.fc30 2453203 Unspecified Download Ticket Service
dl is a file exchange service that allows you to upload any file to a web
server and generate a unique ticket for others to download. The ticket is
automatically expired according to the specified rules, so that you don't need
to keep track or cleanup afterward. dl also allows you to grant an anonymous,
one-time upload for others to send *you* a file, without the requirement of
account management.
dl is usually installed as a "email attachments replacement" due to its
simplicity (though can be used in other ways).
dl_poly-common 1.10 3.fc30 1190549 Unspecified General purpose classical molecular dynamics (MD) simulation - common files
Common files for dl_poly.
This package contains, principally the "utility" source and data files.
dl_poly-doc 1.10 3.fc30 2518973 Unspecified Documentation for dl_poly and dl_poly-gui
Documentation for dl_poly and dl_poly-gui.
dl_poly-gui 1.10 3.fc30 379391 Unspecified GUI for dl_poly
This package provides the Java-based graphical user interface for dl_poly.
dl_poly-mpich 1.10 3.fc30 2282880 Unspecified General purpose classical molecular dynamics (MD) simulation - mpich version
DL_POLY Classic is a general purpose molecular dynamics simulation
package developed at Daresbury Laboratory by W. Smith, T.R. Forester
and I.T. Todorov. It is based on the package DL_POLY_2, which was
originally developed by the Computational Chemistry Group, (CCG) at
Daresbury Laboratory under the auspices of the Engineering and
Physical Sciences Research Council (EPSRC) for (CCP5), the EPSRC's
Collaborative Computational Project for the Computer Simulation of
Condensed Phases.
DL_POLY Classic achieves parallelisation using the Replicated Data strategy
which is suitable for homogeneous, distributed-memory, parallel
computers. The code is useful for simulations of up to 30,000 atoms
with good parallel performance on up to 100 processors, though in some
circumstances it can exceed or fail to reach these limits.
Reference: I.T. Todorov, W. Smith, K. Trachenko & M.T. Dove,
Journal of Materials Chemistry, (2006) 16, 1911-1918
This is a parallel version using mpich.
dl_poly-openmpi 1.10 3.fc30 2299272 Unspecified General purpose classical molecular dynamics (MD) simulation - openmpi version
DL_POLY Classic is a general purpose molecular dynamics simulation
package developed at Daresbury Laboratory by W. Smith, T.R. Forester
and I.T. Todorov. It is based on the package DL_POLY_2, which was
originally developed by the Computational Chemistry Group, (CCG) at
Daresbury Laboratory under the auspices of the Engineering and
Physical Sciences Research Council (EPSRC) for (CCP5), the EPSRC's
Collaborative Computational Project for the Computer Simulation of
Condensed Phases.
DL_POLY Classic achieves parallelisation using the Replicated Data strategy
which is suitable for homogeneous, distributed-memory, parallel
computers. The code is useful for simulations of up to 30,000 atoms
with good parallel performance on up to 100 processors, though in some
circumstances it can exceed or fail to reach these limits.
Reference: I.T. Todorov, W. Smith, K. Trachenko & M.T. Dove,
Journal of Materials Chemistry, (2006) 16, 1911-1918
This is a parallel version using openmpi.
dleyna-connector-dbus 0.3.0 4.fc30 44793 Unspecified D-Bus connector for dLeyna services
D-Bus connector for dLeyna services.
dleyna-connector-dbus 0.3.0 4.fc30 49665 Unspecified D-Bus connector for dLeyna services
D-Bus connector for dLeyna services.
dleyna-connector-dbus-devel 0.3.0 4.fc30 283 Unspecified Development files for dleyna-connector-dbus
The dleyna-connector-dbus-devel package contains libraries and header files for
developing applications that use dleyna-connector-dbus.
dleyna-connector-dbus-devel 0.3.0 4.fc30 285 Unspecified Development files for dleyna-connector-dbus
The dleyna-connector-dbus-devel package contains libraries and header files for
developing applications that use dleyna-connector-dbus.
dleyna-core 0.6.0 4.fc30 80932 Unspecified Utilities for higher level dLeyna libraries
A set of utility functions that are used by the higher level dLeyna libraries
to communicate with DLNA devices. It provides APIs for logging, error, settings
and task management, and an IPC abstraction.
dleyna-core 0.6.0 4.fc30 82192 Unspecified Utilities for higher level dLeyna libraries
A set of utility functions that are used by the higher level dLeyna libraries
to communicate with DLNA devices. It provides APIs for logging, error, settings
and task management, and an IPC abstraction.
dleyna-core-devel 0.6.0 4.fc30 25127 Unspecified Development files for dleyna-core
The dleyna-core-devel package contains libraries and header files for
developing applications that use dleyna-core.
dleyna-core-devel 0.6.0 4.fc30 25129 Unspecified Development files for dleyna-core
The dleyna-core-devel package contains libraries and header files for
developing applications that use dleyna-core.
dleyna-renderer 0.6.0 4.fc30 178105 Unspecified Service for interacting with Digital Media Renderers
D-Bus service for clients to discover and manipulate DLNA Digital Media
Renderers (DMRs).
dleyna-renderer 0.6.0 4.fc30 180117 Unspecified Service for interacting with Digital Media Renderers
D-Bus service for clients to discover and manipulate DLNA Digital Media
Renderers (DMRs).
dleyna-renderer-devel 0.6.0 4.fc30 220 Unspecified Development files for dleyna-renderer
The dleyna-renderer-devel package contains libraries and header files for
developing applications that use dleyna-renderer.
dleyna-renderer-devel 0.6.0 4.fc30 220 Unspecified Development files for dleyna-renderer
The dleyna-renderer-devel package contains libraries and header files for
developing applications that use dleyna-renderer.
dleyna-server 0.6.0 4.fc30 254363 Unspecified Service for interacting with Digital Media Servers
D-Bus service for clients to discover and manipulate DLNA Digital Media
Servers (DMSes).
dlib 19.4 10.fc30 3448253 Unspecified A modern C++ toolkit containing machine learning algorithms
Dlib is a general purpose cross-platform open source software library written
in the C++ programming language. Its design is heavily influenced by ideas from
design by contract and component-based software engineering. It contains
components for dealing with networking, threads, graphical user interfaces,
data structures, linear algebra, machine learning, image processing, data
mining, XML and text parsing, numerical optimization, Bayesian networks, and
numerous other tasks.
dlib 19.4 10.fc30 3472681 Unspecified A modern C++ toolkit containing machine learning algorithms
Dlib is a general purpose cross-platform open source software library written
in the C++ programming language. Its design is heavily influenced by ideas from
design by contract and component-based software engineering. It contains
components for dealing with networking, threads, graphical user interfaces,
data structures, linear algebra, machine learning, image processing, data
mining, XML and text parsing, numerical optimization, Bayesian networks, and
numerous other tasks.
dlib-devel 19.4 10.fc30 11269530 Unspecified Development files for dlib
Dlib is a general purpose cross-platform open source software library written
in the C++ programming language. This package contains development files for
the library.
dlib-devel 19.4 10.fc30 11269570 Unspecified Development files for dlib
Dlib is a general purpose cross-platform open source software library written
in the C++ programming language. This package contains development files for
the library.
dlib-doc 19.4 10.fc30 63631672 Unspecified Documentation for dlib
Dlib is a general purpose cross-platform open source software library written
in the C++ programming language. This package contains the library
documentation and examples.
dlm 4.0.6 10.fc30 186443 Unspecified dlm control daemon and tool
The kernel dlm requires a user daemon to control membership.
dlm-devel 4.0.6 10.fc30 11378 Unspecified Development files for dlm
The dlm-devel package contains libraries and header files for
developing applications that use dlm.
dlm-devel 4.0.6 10.fc30 11378 Unspecified Development files for dlm
The dlm-devel package contains libraries and header files for
developing applications that use dlm.
dlm-lib 4.0.6 10.fc30 66745 Unspecified Library for dlm
The dlm-lib package contains the libraries needed to use the dlm
from userland applications.
dlm-lib 4.0.6 10.fc30 69485 Unspecified Library for dlm
The dlm-lib package contains the libraries needed to use the dlm
from userland applications.
dlrn 0.9.0 2.fc30 51771 Unspecified Build and maintain yum repositories following upstream commits
DLRN builds and maintains yum repositories following upstream commits from a Git repo.
dlrn-doc 0.9.0 2.fc30 8509466 Unspecified Documentation for DLRN
DLRN builds and maintains yum repositories following upstream commits from a Git repo.
This package contains the DLRN documentation.
dmapd 0.0.80 1.fc30 388836 Unspecified A server that provides DAAP and DPAP shares
The dmapd project provides a GObject-based, Open Source implementation
of DMAP sharing with the following features:
o Support for both DAAP and DPAP
o Support for realtime transcoding of media formats not natively
supported by clients
o Support for many metadata formats, such as those associated with Ogg
Vorbis and MP3 (e.g., ID3)
o Detection of video streams so that clients may play them as video
o Use of GStreamer to support a wide range of audio and video CODECs
o Caching of photograph thumbnails to avoid regenerating them each time
the server restarts
Dmapd runs on Linux and other POSIX operating systems. It has been
used on OpenWrt Linux-based systems with as little as 32MB of memory
to serve music, video and photograph libraries containing thousands of
files.
dmapd 0.0.80 1.fc30 400836 Unspecified A server that provides DAAP and DPAP shares
The dmapd project provides a GObject-based, Open Source implementation
of DMAP sharing with the following features:
o Support for both DAAP and DPAP
o Support for realtime transcoding of media formats not natively
supported by clients
o Support for many metadata formats, such as those associated with Ogg
Vorbis and MP3 (e.g., ID3)
o Detection of video streams so that clients may play them as video
o Use of GStreamer to support a wide range of audio and video CODECs
o Caching of photograph thumbnails to avoid regenerating them each time
the server restarts
Dmapd runs on Linux and other POSIX operating systems. It has been
used on OpenWrt Linux-based systems with as little as 32MB of memory
to serve music, video and photograph libraries containing thousands of
files.
dmapd-devel 0.0.80 1.fc30 17876 Unspecified Files needed to develop modules using dmapd's libraries
This package provides the libraries, include files, and other
resources needed for developing modules using dmapd's API.
dmapd-devel 0.0.80 1.fc30 17880 Unspecified Files needed to develop modules using dmapd's libraries
This package provides the libraries, include files, and other
resources needed for developing modules using dmapd's API.
dmenu 4.9 1.fc30 70628 Unspecified Generic menu for X
Dynamic menu is a generic menu for X, originally designed for dwm. It manages
huge amounts (up to 10.000 and more) of user defined menu items efficiently.
dmg2img 1.6.7 6.fc30 92078 Unspecified Uncompress the Apple compressed disk image files
This package contains dmg2img utility that is able to uncompress compressed dmg
files into plain disk or filesystem images.
dmidecode 3.2 2.fc30 254419 Unspecified Tool to analyse BIOS DMI data
dmidecode reports information about x86 & ia64 hardware as described in the
system BIOS according to the SMBIOS/DMI standard. This information
typically includes system manufacturer, model name, serial number,
BIOS version, asset tag as well as a lot of other details of varying
level of interest and reliability depending on the manufacturer.
This will often include usage status for the CPU sockets, expansion
slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of
I/O ports (e.g. serial, parallel, USB).
dmlite-devel 1.12.1 1.fc30 60073 Unspecified Development libraries and headers for dmlite
This package provides C headers and development libraries for dmlite.
dmlite-devel 1.12.1 1.fc30 60073 Unspecified Development libraries and headers for dmlite
This package provides C headers and development libraries for dmlite.
dmlite-docs 1.12.1 1.fc30 11605205 Unspecified Documentation files for dmlite
This package contains the man pages and HTML documentation for dmlite.
dmlite-dome 1.12.1 1.fc30 2670698 Unspecified The dome daemon
This package provides the binaries necessary to run the dome daemon.
dmlite-dpm-tester 1.12.1 1.fc30 50486 Unspecified The dpm tester tool
Tool that is useful to test the main features of a DPM setup
dmlite-dpm-xrootd 1.12.1 1.fc30 2124679 Unspecified XROOT interface to the Disk Pool Manager (DPM)
This package contains plugins for XROOTD to allow it to provide
access to DPM managed storage via the XROOT protocol.
dmlite-dpmdisk 1.12.1 1.fc30 1093 Unspecified EMI DPM Disk Node
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as RFIO and SRM version 1, version 2 and version 2.2.
This is a virtual package providing all required daemons for a DPM
Disk Node.
dmlite-dpmdisk-domeonly 1.12.1 1.fc30 1093 Unspecified DPM Disk Node
The Disk Pool Manager (DPM) creates a Grid storage element from a set
of disk servers. It provides several interfaces for storing and retrieving
data such as HTTP, Xrootd, GridFTP
This is a metapackage providing all required daemons for a DPM
Disk Node.
dmlite-dpmhead 1.12.1 1.fc30 22318 Unspecified EMI DPM Head Node (MySQL)
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, Xrootd, GridFTP
dmlite-dpmhead-domeonly 1.12.1 1.fc30 22318 Unspecified DPM Head Node (MySQL)
The Disk Pool Manager (DPM) creates a Grid storage element from a set
of disk servers. It provides several interfaces for storing and retrieving
data such as HTTP, Xrootd, GridFTP
This is a metapackage providing all required daemons for a DPM Head Node.
dmlite-libs 1.12.1 1.fc30 1661988 Unspecified Libraries for dmlite packages
This package provides the core libraries used by dmlite.
dmlite-libs 1.12.1 1.fc30 1691462 Unspecified Libraries for dmlite packages
This package provides the core libraries used by dmlite.
dmlite-plugins-adapter 1.12.1 1.fc30 830721 Unspecified Adapter plugin for dmlite
This package provides the adapter plug-in for dmlite. This plug-in provides both
a name-space and pool management implementation which fallback to forwarding
calls to the old LcgDM DPNS and DPM daemons.
dmlite-plugins-domeadapter 1.12.1 1.fc30 1062832 Unspecified Adapter plugin for dmlite
This package provides the next-generation adapter plug-in for dmlite, which uses
dome and does not depend on the old LcgDM DPNS and DPM daemons.
dmlite-plugins-librarian 1.12.1 1.fc30 90471 Unspecified Librarian plugin for dmlite
This package provides the librarian plug-in for dmlite.
dmlite-plugins-memcache 1.12.1 1.fc30 0 Unspecified Memcached plugin for dmlite
This package provides the memcached plug-in for dmlite. It provides a
memcached based layer for the Lcgdm nameserver.
dmlite-plugins-mysql 1.12.1 1.fc30 717082 Unspecified MySQL plugin for dmlite
This package provides the MySQL plug-in for dmlite.
dmlite-plugins-profiler 1.12.1 1.fc30 621232 Unspecified Monitoring plugin for dmlite
This package provides the profiler plug-in for dmlite. This plug-in
provides multiple performance measurement tools for dmlite.
dmlite-private-devel 1.12.1 1.fc30 93560 Unspecified Private development libraries and headers for dmlite
Private development headers for dmlite. Provided for the development of
dmlite plugins only, no API compatibility is guaranteed on these headers.
dmlite-private-devel 1.12.1 1.fc30 93560 Unspecified Private development libraries and headers for dmlite
Private development headers for dmlite. Provided for the development of
dmlite plugins only, no API compatibility is guaranteed on these headers.
dmlite-puppet-dpm 1.12.1 1.fc30 2705162 Unspecified Puppet modules for DPM configuration
This package provides the modules for the DPM configuration via puppet
dmlite-shell 1.12.1 1.fc30 403918 Unspecified Shell environment for dmlite
This package provides a shell environment for dmlite. It includes useful
commands for system administration, testers and power users.
dmraid 1.0.0.rc16 41.fc30 411276 Unspecified Device-mapper RAID tool and library
DMRAID supports RAID device discovery, RAID set activation, creation,
removal, rebuild and display of properties for ATARAID/DDF1 metadata on
Linux >= 2.4 using device-mapper.
dmraid 1.0.0.rc16 41.fc30 430324 Unspecified Device-mapper RAID tool and library
DMRAID supports RAID device discovery, RAID set activation, creation,
removal, rebuild and display of properties for ATARAID/DDF1 metadata on
Linux >= 2.4 using device-mapper.
dmraid-devel 1.0.0.rc16 41.fc30 35074 Unspecified Development libraries and headers for dmraid
dmraid-devel provides a library interface for RAID device discovery,
RAID set activation and display of properties for ATARAID volumes.
dmraid-events 1.0.0.rc16 41.fc30 20044 Unspecified dmevent_tool (Device-mapper event tool) and DSO
Provides a dmeventd DSO and the dmevent_tool to register devices with it
for device monitoring. All active RAID sets should be manually registered
with dmevent_tool.
dmraid-events-logwatch 1.0.0.rc16 41.fc30 4149 Unspecified dmraid logwatch-based email reporting
Provides device failure reporting via logwatch-based email reporting.
Device failure reporting has to be activated manually by activating the
/etc/cron.d/dmeventd-logwatch entry and by calling the dmevent_tool
(see manual page for examples) for any active RAID sets.
dmtcp 2.5.2 3.fc29 3386958 Applications/System Checkpoint/Restart functionality for Linux processes
DMTCP (Distributed MultiThreaded Checkpointing) is a tool to transparently
checkpointing the state of an arbitrary group of programs including
multi-threaded and distributed computations. It operates directly on the user
binary executable, with no Linux kernel modules or other kernel mods.
Among the applications supported by DMTCP are Open MPI, MATLAB, Python, Perl,
and many programming languages and shell scripting languages. DMTCP also
supports GNU screen sessions, including vim/cscope and emacs. With the use of
TightVNC, it can also checkpoint and restart X-Windows applications, as long as
they do not use extensions (e.g.: no OpenGL, no video).
This package contains DMTCP binaries.
dmtcp 2.5.2 3.fc29 3203742 Applications/System Checkpoint/Restart functionality for Linux processes
DMTCP (Distributed MultiThreaded Checkpointing) is a tool to transparently
checkpointing the state of an arbitrary group of programs including
multi-threaded and distributed computations. It operates directly on the user
binary executable, with no Linux kernel modules or other kernel mods.
Among the applications supported by DMTCP are Open MPI, MATLAB, Python, Perl,
and many programming languages and shell scripting languages. DMTCP also
supports GNU screen sessions, including vim/cscope and emacs. With the use of
TightVNC, it can also checkpoint and restart X-Windows applications, as long as
they do not use extensions (e.g.: no OpenGL, no video).
This package contains DMTCP binaries.
dmtcp-devel 2.5.2 3.fc29 20945 Development/Libraries DMTCP developer package
This package provides files for developing DMTCP plugins.
dmtcp-devel 2.5.2 3.fc29 20945 Development/Libraries DMTCP developer package
This package provides files for developing DMTCP plugins.
dmtx-utils 0.7.6 4.fc30 155952 Unspecified Tools for working with Data Matrix 2D bar-codes
libdmtx is open source software for reading and writing Data Matrix 2D
bar-codes on Linux, Unix, OS X, Windows, and mobile devices. At its core
libdmtx is a shared library, allowing C/C++ programs to use its capabilities
without restrictions or overhead.
The included utility programs, dmtxread and dmtxwrite, provide the official
interface to libdmtx from the command line, and also serve as a good reference
for programmers who wish to write their own programs that interact with
libdmtx.
dmz-cursor-themes 0.4 16.fc30 6526975 Unspecified X cursors themes
An X cursors theme by Jakub Steiner used by OpenSUSE.
dnf 4.2.2 2.fc30 1787582 Unspecified Package manager
Utility that allows users to manage packages on their systems.
It supports RPMs, modules and comps groups & environments.
dnf-automatic 4.2.2 2.fc30 46764 Unspecified Package manager - automated upgrades
Systemd units that can periodically download package upgrades and apply them.
dnf-data 4.2.2 2.fc30 34440 Unspecified Common data and configuration files for DNF
Common data and configuration files for DNF
dnf-plugin-ovl 0.0.2 2.20181107gitfd1a5a5.fc30 22085 Unspecified DNF plugin to work around overlayfs issues
Workaround to run dnf on overlayfs. A port of yum-plugin-ovl to dnf.
dnf-plugin-subscription-manager 1.24.2 3.fc30 22504 Unspecified Subscription Manager plugins for DNF
This package provides plugins to interact with repositories and subscriptions
from the Red Hat entitlement platform; contains subscription-manager and
product-id plugins.
dnf-plugin-swidtags 0.8.1 1.fc30 21274 Unspecified DNF plugin for keeping SWID tags up-to-date
DNF plugin for retrieving SWID tags from repository metadata
or producing them locally.
dnf-plugins-core 4.0.6 1.fc30 15048 Unspecified Core Plugins for DNF
Core Plugins for DNF. This package enhances DNF with builddep, config-manager,
copr, debug, debuginfo-install, download, needs-restarting, repoclosure,
repograph, repomanage, reposync, changelog and repodiff commands. Additionally
provides generate_completion_cache passive plugin.
dnf-utils 4.0.6 1.fc30 18639 Unspecified Yum-utils CLI compatibility layer
As a Yum-utils CLI compatibility layer, supplies in CLI shims for
debuginfo-install, repograph, package-cleanup, repoclosure, repomanage,
repoquery, reposync, repotrack, repodiff, builddep, config-manager, debug
and download that use new implementations using DNF.
dnf-yum 4.2.2 2.fc30 18062 Unspecified Package manager
Utility that allows users to manage packages on their systems.
It supports RPMs, modules and comps groups & environments.
dnfdaemon 0.3.19 6.fc30 223411 Unspecified DBus daemon for dnf package actions
Dbus daemon for performing package actions with the dnf package manager
dnfdaemon-selinux 0.3.19 6.fc30 0 Unspecified SELinux integration for the dnf-daemon
Metapackage customizing the SELinux policy to make the dnf-daemon work with
SELinux enabled in enforcing mode.
dnfdragora 1.1.1 2.fc30 1320692 Unspecified DNF package-manager based on libYui abstraction
dnfdragora is a DNF frontend, based on rpmdragora from Mageia
(originally rpmdrake) Perl code.
dnfdragora is written in Python 3 and uses libYui, the widget
abstraction library written by SUSE, so that it can be run
using Qt 5, GTK+ 3, or ncurses interfaces.
dnfdragora-updater 1.1.1 2.fc30 27603 Unspecified Update notifier applet for dnfdragora
dnfdragora is a DNF frontend, based on rpmdragora from Mageia
(originally rpmdrake) Perl code.
dnfdragora is written in Python 3 and uses libYui, the widget
abstraction library written by SUSE, so that it can be run
using Qt 5, GTK+ 3, or ncurses interfaces.
This package provides the update notifier applet for dnfdragora.
dnscap 141 16.fc30 62793 Unspecified DNS traffic capture utility
dnscap is a network capture utility designed specifically for DNS traffic. It
produces binary data in pcap(3) format, either on standard output or in
successive dump files. This utility is similar to tcpdump(1), but has finer
grained packet recognition tailored to DNS transactions and protocol options
dnscrypt-proxy 2.0.22 1.fc30 12941836 Unspecified A flexible DNS proxy, with support for encrypted DNS protocols
A flexible DNS proxy, with support for modern encrypted DNS protocols such as
DNSCrypt v2 and DNS-over-HTTP/2.
Features:
- DNS traffic encryption and authentication. Supports DNS-over-HTTPS (DoH)
and DNSCrypt.
- DNSSEC compatible
- DNS query monitoring, with separate log files for regular and suspicious
queries
- Pattern-based local blocking of DNS names and IP addresses
- Time-based filtering, with a flexible weekly schedule
- Transparent redirection of specific domains to specific resolvers
- DNS caching, to reduce latency and improve privacy
- Local IPv6 blocking to reduce latency on IPv4-only networks
- Load balancing: pick a set of resolvers, dnscrypt-proxy will automatically
measure and keep track of their speed, and balance the traffic across the
fastest available ones.
- Cloaking: like a HOSTS file on steroids, that can return preconfigured
addresses for specific names, or resolve and return the IP address of other
names. This can be used for local development as well as to enforce safe
search results on Google, Yahoo and Bing.
- Automatic background updates of resolvers lists
- Can force outgoing connections to use TCP; useful with tunnels such as Tor.
dnscrypt-proxy-gui 1.21.16 3.fc30 1024778 Unspecified GUI wrapper for dnscrypt-proxy
The Qt/KF5 GUI wrapper over dnscrypt-proxy (version 1, 2)
for encrypting all DNS traffic between the user and DNS resolvers,
preventing any spying, spoofing or man-in-the-middle attacks.
dnsdist 1.3.3 3.fc30 6111422 Unspecified Highly DNS-, DoS- and abuse-aware loadbalancer
dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life
is to route traffic to the best server, delivering top performance to
legitimate users while shunting or blocking abusive traffic.
dnsenum 1.2.4.2 12.fc30 57225 Unspecified A tool to enumerate DNS info about domains
The purpose of this tool is to gather as much information as possible about a
domain. The program currently gathers A, NS, MX records, performs axfr queries,
gets extra names and subdomains via google scraping, bruteforces subdomains from
file, calculate C class domain network ranges and perform whois queries on them,
perform reverse lookups on netranges, writes ip-blocks to domain_ips.txt.
dnsjava 2.1.3 16.fc30 369488 Unspecified Java DNS implementation
dnsjava is an implementation of DNS in Java. It supports all of the common
record types and the DNSSEC types. It can be used for queries, zone transfers,
and dynamic updates. It includes a cache which can be used by clients, and a
minimal implementation of a server. It supports TSIG authenticated messages,
partial DNSSEC verification, and EDNS0.
dnsjava provides functionality above and beyond that of the InetAddress class.
Since it is written in pure Java, dnsjava is fully threadable, and in many
cases is faster than using InetAddress.
dnsjava provides both high and low level access to DNS. The high level
functions perform queries for records of a given name, type, and class, and
return an array of records. There is also a clone of InetAddress, which is
even simpler. A cache is used to reduce the number of DNS queries sent. The
low level functions allow direct manipulation of dns messages and records, as
well as allowing additional resolver properties to be set.
A 'dig' clone and a dynamic update program are included, as well as a
primary-only server.
dnsjava-javadoc 2.1.3 16.fc30 3175778 Unspecified Javadoc for dnsjava
Javadoc for dnsjava.
dnsmap 0.30 17.fc30 160582 Unspecified Sub-domains bruteforcer
dnsmap is a small tool that perform brute-forcing of domains.
It can use a built-in list or an external dictionary file and
saves output to TXT/CSV format.
dnsmasq 2.80 4.fc30 748921 Unspecified A lightweight DHCP/caching DNS server
Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server.
It is designed to provide DNS and, optionally, DHCP, to a small network.
It can serve the names of local machines which are not in the global
DNS. The DHCP server integrates with the DNS server and allows machines
with DHCP-allocated addresses to appear in the DNS with names configured
either in each host or in a central configuration file. Dnsmasq supports
static and dynamic DHCP leases and BOOTP for network booting of diskless
machines.
dnsmasq-utils 2.80 4.fc30 116489 Unspecified Utilities for manipulating DHCP server leases
Utilities that use the standard DHCP protocol to query/remove a DHCP
server's leases.
dnsperf 2.2.1 3.fc30 199355 Unspecified Benchmarking authorative and recursing DNS servers
This is dnsperf, a collection of DNS server performance testing tools.
For more information, see the dnsperf(1) and resperf(1) man pages.
dnsperf-data 2.2.1 3.fc30 248609309 Unspecified Benchmarking authorative and recursing DNS servers data
This is dnsperf, a collection of DNS server performance testing tools.
This package provides example query file to use by dnsperf and resperf tools.
dnssec-check 2.1 7.fc26 175533 Applications/Internet A tool to check DNSSEC capabilities of the local DNS resolvers
DNSSEC-Check provides a GUI mechansim for scanning the system's
configured DNS resolvers to see if they support DNSSEC. For each test
the utility displays a graphical red/green light indicating the result
of the test. Clicking on a light will explain the status of the light
and what was tested.
dnssec-nodes 2.1 8.fc27 428877 Applications/Internet DNS Visualization Tool
A graphical DNS visualization application, specializing in DNSSEC.
The DNSSEC-Nodes application is a graphical debugging utility that
allows administrators to watch the data being logged into a libval or
bind logging file.
dnssec-system-tray 2.1 12.fc30 113642 Unspecified System Tray for monitoring log files for DNSSEC errors
A simply system-tray application that monitors log files (eg libval,
or bind/named logfiles) for DNSSEC error messages that should be
displayed to the user.
dnssec-tools 2.2.3 3.fc30 2094789 Unspecified A suite of tools for managing dnssec aware DNS usage
The goal of the DNSSEC-Tools project is to create a set of tools,
patches, applications, wrappers, extensions, and plugins that will
help ease the deployment of DNSSEC-related technologies.
dnssec-tools-libs 2.2.3 3.fc30 460976 Unspecified C-based libraries for dnssec aware tools
C-based libraries useful for developing dnssec aware tools.
dnssec-tools-libs 2.2.3 3.fc30 440448 Unspecified C-based libraries for dnssec aware tools
C-based libraries useful for developing dnssec aware tools.
dnssec-tools-libs-devel 2.2.3 3.fc30 160249 Unspecified C-based development libraries for dnssec aware tools
C-based libraries useful for developing dnssec aware tools.
dnssec-tools-libs-devel 2.2.3 3.fc30 160036 Unspecified C-based development libraries for dnssec aware tools
C-based libraries useful for developing dnssec aware tools.
dnssec-tools-perlmods 2.2.3 3.fc30 750998 Unspecified Perl modules supporting DNSSEC (needed by the dnssec-tools)
The dnssec-tools project comes with a number of perl modules that are
required by the DNSSEC tools themselves as well as modules that are
useful for other developers.
dnssec-trigger 0.15 8.fc30 290272 Unspecified Tool for dynamic reconfiguration of validating resolver Unbound
dnssec-trigger reconfigures the local Unbound DNS server. Unbound is a
resolver performing DNSSEC validation. dnssec-trigger is a set of daemon
and script. On every network configuration change dnssec-trigger performs
set of tests and configures Unbound based on the current NetworkManager
configuration, its own configuration and results of performed tests.
dnssec-trigger-panel 0.15 8.fc30 108456 Unspecified Applet for interaction between the user and dnssec-trigger
This package provides the GTK panel for interaction between the user
and dnssec-trigger daemon. It is able to show the current state and
results of probing performed by dnssec-trigger daemon. Also in case
some user input is needed, the panel creates a dialog window.
dnssec4j 0.1.6 7.fc30 72816 Unspecified Java Wrapper around DNSSEC primitives in dnsjava
DNSSEC4J is a higher level wrapper around the
DNSSEC primitives in dnsjava allowing applications to
more easily integrate DNSSEC into their applications.
dnssec4j-javadoc 0.1.6 7.fc30 217305 Unspecified Javadoc for dnssec4j
This package contains javadoc for dnssec4j.
dnstop 20140915 9.fc30 112386 Unspecified Displays information about DNS traffic on your network
dnstop is a libpcap application (ala tcpdump) that displays various
tables of DNS traffic on your network.
dnstop supports both IPv4 and IPv6 addresses.
To help find especially undesirable DNS queries, dnstop provides a
number of filters.
dnstop can either read packets from the live capture device, or from a
tcpdump savefile.
dnstracer 1.9 21.fc30 54736 Unspecified Trace a DNS record to its start of authority
dnstracer determines where a given Domain Name Server (DNS) gets its
information from, and follows the chain of DNS servers back to the
servers which know the data.
docbook-dtds 1.0 72.fc30 8665282 Unspecified SGML and XML document type definitions for DocBook
The DocBook Document Type Definition (DTD) describes the syntax of
technical documentation texts (articles, books and manual pages).
This syntax is XML-compliant and is developed by the OASIS consortium.
This package contains SGML and XML versions of the DocBook DTD.
docbook-simple 1.1 21.fc30 180934 Unspecified Simplified DocBook is a small subset of the DocBook XML DTD
Simplified DocBook is an attempt to provide a proper subset of DocBook
that is simultaneously smaller and still useful. Documents written in
the subset must be 100% legal DocBook documents. This is a subset for
single documents (articles, white papers, etc.), so there's no need
for books or sets, just 'articles'. Simplified DocBook documents are
viewable in online browsers if styled with CSS. (it's XML not SGML).
docbook-slides 3.4.0 22.fc30 1953296 Unspecified DocBook Slides document type and stylesheets
DocBook Slides provides customization layers of the both the
Simplified and the full DocBook XML DTD, as well as the DocBook XSL
Stylesheets. This package contains the XML document type definition
and stylesheets for processing DocBook Slides XML. The slides doctype
and stylesheets are for generating presentations, primarily in HTML.
docbook-style-dsssl 1.79 27.fc30 2308505 Unspecified Norman Walsh's modular stylesheets for DocBook
These DSSSL stylesheets allow to convert any DocBook document to another
printed (for example, RTF or PostScript) or online (for example, HTML) format.
They are highly customizable.
docbook-style-xsl 1.79.2 9.fc30 16311851 Unspecified Norman Walsh's XSL stylesheets for DocBook XML
These XSL stylesheets allow you to transform any DocBook XML document to
other formats, such as HTML, FO, and XHMTL. They are highly customizable.
docbook-utils 0.6.14 47.fc30 160513 Unspecified Shell scripts for managing DocBook documents
This package contains scripts are for easy conversion from DocBook
files to other formats (for example, HTML, RTF, and PostScript), and
for comparing SGML files.
docbook-utils-pdf 0.6.14 47.fc30 119 Unspecified A script for converting DocBook documents to PDF format
This package contains a script for converting DocBook documents to
PDF format.
docbook2X 0.8.8 32.fc30 1342587 Unspecified Convert docbook into man and Texinfo
docbook2X converts DocBook documents into man pages and Texinfo
documents.
docbook5-schemas 5.0 19.fc30 3679958 Unspecified Norman Walsh's schemas (DTD, Relax NG, W3C schema) for Docbook 5.X
Docbook 5.X is a complete rewrite of Docbook in RELAX NG and not compatible
with previous Docbook versions. This package contains Relax NG , DTD and W3C
schema for Docbook 5.X. Syntax of those schemas is XML-compliant and is
developed by the OASIS consortium.
docbook5-style-xsl 1.79.2 7.fc30 48741932 Unspecified Norman Walsh's XSL stylesheets for DocBook 5.X
These XSL namespace aware stylesheets allow you to transform any
DocBook 5 document to other formats, such as HTML, manpages, FO,
XHMTL and other formats. They are highly customizable. For more
information see W3C page about XSL.
docco 0.6.3 11.fc30 271030 Unspecified The Quick and Dirty Literate Programming Documentation Generator
Docco is a quick-and-dirty documentation generator, written in Literate
CoffeeScript. It produces an HTML document that displays your comments
intermingled with your code. All prose is passed through Markdown, and
code is passed through Pygments syntax highlighting.
docker 1.13.1 66.git1185cfd.fc30 87548540 Unspecified Automates deployment of containerized applications
Docker is an open-source engine that automates the deployment of any
application as a lightweight, portable, self-sufficient container that will
run virtually anywhere.
Docker containers can encapsulate any payload, and will run consistently on
and between virtually any server. The same container that a developer builds
and tests on a laptop will run at scale, in production*, on VMs, bare-metal
servers, OpenStack clusters, public instances, or combinations of the above.
docker-anaconda-addon 0.4 10.fc30 79963 Unspecified Anaconda kickstart support for Docker
Add a kickstart addon section to Anaconda, com_redhat_docker, to run Docker on
the newly installed system during the installation process.
docker-client-java 8.11.7 4.fc30 742417 Unspecified Docker Client
The Docker Client is a Java API library for accessing a Docker daemon.
docker-common 1.13.1 66.git1185cfd.fc30 13595 Unspecified Common files for docker and docker-latest
This package contains the common files /usr/bin/docker which will point to
/usr/bin/docker-current or /usr/bin/docker-latest configurable via
/etc/sysconfig/docker
docker-compose 1.22.0 3.fc30 977838 Unspecified Multi-container orchestration for Docker
Compose is a tool for defining and running multi-container Docker
applications. With Compose, you use a Compose file to configure your
application's services. Then, using a single command, you create and
start all the services from your configuration.
Compose is great for development, testing, and staging environments,
as well as CI workflows.
Using Compose is basically a three-step process.
1. Define your app's environment with a Dockerfile so it can be
reproduced anywhere.
2. Define the services that make up your app in docker-compose.yml so
they can be run together in an isolated environment:
3. Lastly, run docker-compose up and Compose will start and run your
entire app.
docker-devel 1.13.1 66.git1185cfd.fc30 45816046 Unspecified A golang registry for global request variables (source libraries)
A golang registry for global request variables (source libraries)
This package provides the source libraries for Docker.
docker-distribution 2.6.2 9.git48294d9.fc30 20192773 Unspecified Docker toolset to pack, ship, store, and deliver content
Docker toolset to pack, ship, store, and deliver content
docker-fish-completion 1.13.1 66.git1185cfd.fc30 36223 Unspecified fish completion files for Docker
This package installs fish completion files for Docker.
docker-latest 1.13.1 42.git1185cfd.fc30 87366189 Unspecified Automates deployment of containerized applications
Docker is an open-source engine that automates the deployment of any
application as a lightweight, portable, self-sufficient container that will
run virtually anywhere.
Docker containers can encapsulate any payload, and will run consistently on
and between virtually any server. The same container that a developer builds
and tests on a laptop will run at scale, in production*, on VMs, bare-metal
servers, OpenStack clusters, public instances, or combinations of the above.
docker-latest-devel 1.13.1 42.git1185cfd.fc30 38769037 Unspecified A golang registry for global request variables (source libraries)
A golang registry for global request variables (source libraries)
This package provides the source libraries for Docker.
docker-latest-fish-completion 1.13.1 42.git1185cfd.fc30 36223 Unspecified fish completion files for Docker
This package installs fish completion files for Docker.
docker-latest-logrotate 1.13.1 42.git1185cfd.fc30 886 Unspecified cron job to run logrotate on Docker containers
This package installs cron job to run logrotate on Docker containers. logrotate is assumed to be installed on
containers for this to work, failures are silently ignored.
docker-latest-rhsubscription 1.13.1 42.git1185cfd.fc30 0 Unspecified Red Hat subscription management files needed on the host to enable RHEL containers
In order to work with RHEL containers, the host (RHEL, or other) must export susbcription information to the container.
docker-latest-unit-test 1.13.1 42.git1185cfd.fc30 151270681 Unspecified A golang registry for global request variables (source libraries) - for running unit tests
A golang registry for global request variables (source libraries) - for running unit tests - for running unit tests
docker-latest-vim 1.13.1 42.git1185cfd.fc30 1787 Unspecified vim syntax highlighting files for Docker
This package installs vim syntax highlighting files for Docker.
docker-latest-zsh-completion 1.13.1 42.git1185cfd.fc30 113007 Unspecified zsh completion files for Docker
This package installs zsh completion files for Docker.
docker-logrotate 1.13.1 66.git1185cfd.fc30 858 Unspecified cron job to run logrotate on Docker containers
This package installs cron job to run logrotate on Docker containers. logrotate is assumed to be installed on
containers for this to work, failures are silently ignored.
docker-lvm-plugin 1.13.1 66.git1185cfd.fc30 6252152 Unspecified Docker volume driver for lvm volumes
Docker Volume Driver for lvm volumes.
This plugin can be used to create lvm volumes of specified size, which can
then be bind mounted into the container using `docker run` command.
docker-novolume-plugin 1.13.1 66.git1185cfd.fc30 6233593 Unspecified Block container starts with local volumes defined
When a volume in provisioned via the `VOLUME` instruction in a Dockerfile or
via `docker run -v volumename`, host's storage space is used. This could lead to
an unexpected out of space issue which could bring down everything.
There are situations where this is not an accepted behavior. PAAS, for
instance, can't allow their users to run their own images without the risk of
filling the entire storage space on a server. One solution to this is to deny users
from running images with volumes. This way the only storage a user gets can be limited
and PAAS can assign quota to it.
This plugin solves this issue by disallowing starting a container with
local volumes defined. In particular, the plugin will block `docker run` with:
- `--volumes-from`
- images that have `VOLUME`(s) defined
- volumes early provisioned with `docker volume` command
The only thing allowed will be just bind mounts.
docker-rhel-push-plugin 1.13.1 66.git1185cfd.fc30 6540816 Unspecified Avoids pushing a RHEL-based image to docker.io registry
In order to use this plugin you must be running at least Docker 1.10 which
has support for authorization plugins.
This plugin avoids any RHEL based image to be pushed to the default docker.io
registry preventing users to violate the RH subscription agreement.
docker-vim 1.13.1 66.git1185cfd.fc30 1787 Unspecified vim syntax highlighting files for Docker
This package installs vim syntax highlighting files for Docker.
docker-zsh-completion 1.13.1 66.git1185cfd.fc30 113007 Unspecified zsh completion files for Docker
This package installs zsh completion files for Docker.
doclifter 2.18 2.fc30 450083 Unspecified Translates documents written in troff macros to DocBook
The doclifter program translates documents written in troff macros to DocBook.
Lifting documents from presentation level to semantic level is hard, and
a really good job requires human polishing. This tool aims to do everything
that can be mechanized, and to preserve any troff-level information that might
have structural implications in XML comments.
This tool does the hard parts. TBL tables are translated into DocBook
table markup, PIC into SVG, and EQN into MathML (relying on pic2svg
and GNU eqn for the last two).
doge 3.5.0 9.fc30 85865 Unspecified MOTD script based on the doge meme
doge is a simple motd script based on the doge meme. It prints random
grammatically incorrect statements that are sometimes based on things from your
computer.
dogtag-pki 10.6.9 2.fc30 141 Unspecified Dogtag PKI Package
Dogtag PKI is an enterprise software system designed
to manage enterprise Public Key Infrastructure deployments.
PKI consists of the following components:
* Certificate Authority (CA)
* Key Recovery Authority (KRA)
* Online Certificate Status Protocol (OCSP) Manager
* Token Key Service (TKS)
* Token Processing Service (TPS)
dogtag-pki-console-theme 10.6.9 2.fc30 98745 Unspecified Dogtag PKI Console Theme Package
This PKI Console Theme Package contains
Dogtag textual and graphical user interface for PKI Console.
dogtag-pki-server-theme 10.6.9 2.fc30 537393 Unspecified Dogtag PKI Server Theme Package
This PKI Server Theme Package contains
Dogtag textual and graphical user interface for PKI Server.
dokuwiki 20180422b 1.fc30 7642102 Unspecified Standards compliant simple to use wiki
DokuWiki is a standards compliant, simple to use Wiki, mainly aimed at creating
documentation of any kind. It has a simple but powerful syntax which makes sure
the data-files remain readable outside the Wiki and eases the creation of
structured texts.
All data is stored in plain text files no database is required.
dokuwiki-selinux 20180422b 1.fc30 112 Unspecified SELinux support for dokuwiki
Configures DokuWiki to run in SELinux enabled environments.
dolphin 18.12.2 1.fc30 7234664 Unspecified KDE File Manager
KDE File Manager.
dolphin-connector 1.2 26.fc30 28949 Unspecified Simple MySQL C API wrapper for C++
Dolphin Connector is a simple MySQL C API wrapper for C++.
It is originally designed to be as efficient as is possible,
and makes no use of exceptions.
dolphin-connector 1.2 26.fc30 29793 Unspecified Simple MySQL C API wrapper for C++
Dolphin Connector is a simple MySQL C API wrapper for C++.
It is originally designed to be as efficient as is possible,
and makes no use of exceptions.
dolphin-connector-devel 1.2 26.fc30 3577 Unspecified Development files for Dolphin Connector
Dolphin Connector development package.
dolphin-connector-devel 1.2 26.fc30 3577 Unspecified Development files for Dolphin Connector
Dolphin Connector development package.
dolphin-devel 18.12.2 1.fc30 18023 Unspecified Developer files for dolphin
Developer files for dolphin.
dolphin-devel 18.12.2 1.fc30 18029 Unspecified Developer files for dolphin
Developer files for dolphin.
dolphin-emu 5.0 27.fc30 11295051 Unspecified GameCube / Wii / Triforce Emulator
Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the
Gamecube) emulator, which supports full HD video with several enhancements such
as compatibility with all PC controllers, turbo speed, networked multiplayer,
and more.
Most games run perfectly or with minor bugs.
dolphin-emu-data 5.0 27.fc30 2076867 Unspecified Dolphin Emulator data files
This package provides the data files for dolphin-emu.
dolphin-emu-nogui 5.0 27.fc30 5520991 Unspecified Dolphin Emulator without a graphical user interface
Dolphin Emulator without a graphical user interface.
dolphin-libs 18.12.2 1.fc30 2396203 Unspecified Dolphin runtime libraries
Dolphin runtime libraries.
dolphin-libs 18.12.2 1.fc30 2321587 Unspecified Dolphin runtime libraries
Dolphin runtime libraries.
dolphin-plugins 18.12.2 1.fc30 2073130 Unspecified Dolphin plugins for revision control systems
Plugins for the Dolphin file manager integrating the following revision control
systems:
* Dropbox
* Git
* Subversion (SVN)
* Bazaar (Bzr)
dom4j 2.0.0 7.fc30 325748 Unspecified Open Source XML framework for Java
dom4j is an Open Source XML framework for Java. dom4j allows you to read,
write, navigate, create and modify XML documents. dom4j integrates with
DOM and SAX and is seamlessly integrated with full XPath support.
dom4j-javadoc 2.0.0 7.fc30 9603218 Unspecified Javadoc for dom4j
Javadoc for dom4j.
domoticz 4.9700 6.fc30 24854303 Unspecified Open source Home Automation System
Domoticz is a Home Automation System that lets you monitor and configure various
devices like: Lights, Switches, various sensors/meters like Temperature, Rain,
Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to
any mobile device
domtt 0.7.3 16.fc30 107996 Unspecified DOM Tooltip (aka domTT) is a Javascript widget
DOM Tooltip (aka domTT) is a Javascript widget, released under the Apache 2.0
license, which allows developers to add customized tool-tips to their web sites.
dontpanic 1.02 3.fc30 53013 Unspecified Very simple library and executable used in testing Alien::Base
This software provides a very simple library and executable used in testing
Alien::Base.
dontpanic 1.02 3.fc30 54661 Unspecified Very simple library and executable used in testing Alien::Base
This software provides a very simple library and executable used in testing
Alien::Base.
dontpanic-devel 1.02 3.fc30 732 Unspecified Development files for dontpanic
This package contains libraries and header files needed for developing
applications that use dontpanic.
dontpanic-devel 1.02 3.fc30 734 Unspecified Development files for dontpanic
This package contains libraries and header files needed for developing
applications that use dontpanic.
doodle 0.7.0 15.fc29 250413 Applications/File Doodle is a tool to quickly search the documents on a computer
Doodle is a tool to quickly search the documents on a computer. Doodle builds
an index using meta-data contained in the documents and allows fast searches on
the resulting database. Doodle uses libextractor to support obtaining meta-data
from various file-formats. The database used by doodle is a suffix tree,
resulting in fast lookups. Doodle supports approximate searches.
doodle 0.7.0 15.fc29 252725 Applications/File Doodle is a tool to quickly search the documents on a computer
Doodle is a tool to quickly search the documents on a computer. Doodle builds
an index using meta-data contained in the documents and allows fast searches on
the resulting database. Doodle uses libextractor to support obtaining meta-data
from various file-formats. The database used by doodle is a suffix tree,
resulting in fast lookups. Doodle supports approximate searches.
doodle-devel 0.7.0 15.fc29 6037 Development/Libraries Development files for doodle
The doodle-devel package contains header file for
developing applications that use doodle.
doodle-devel 0.7.0 15.fc29 6039 Development/Libraries Development files for doodle
The doodle-devel package contains header file for
developing applications that use doodle.
dopewars 1.5.12 20.1033svn.fc26 1314541 Amusements/Games A drug dealing game
Based on John E. Dell's old Drug Wars game, dopewars is a simulation of an
imaginary drug market. dopewars is an All-American game which features
buying, selling, and trying to get past the cops!
The first thing you need to do is pay off your debt to the Loan Shark. After
that, your goal is to make as much money as possible (and stay alive)! You
have one month of game time to make your fortune.
dopewars supports multiple players via. TCP/IP. Chatting to and fighting
with other players (computer or human) is supported; check the command line
switches (via dopewars -h) for further information.
dopewars-sdl 1.5.12 20.1033svn.fc26 6760 Amusements/Games SDL sound support for dopewars
This package adds a plugin to dopewars to allow sound to be output via.
the Simple DirectMedia Layer mixer (SDL_mixer).
dos2unix 7.4.0 6.fc30 702018 Unspecified Text file format converters
Convert text files with DOS or Mac line endings to Unix line endings and
vice versa.
dosbox 0.74.2 3.fc30 4361520 Unspecified x86/DOS emulator with sound and graphics
DOSBox is a DOS-emulator using SDL for easy portability to different
platforms. DOSBox has already been ported to several different platforms,
such as Windows, BeOS, Linux, Mac OS X...
DOSBox emulates a 286/386 realmode CPU, Directory FileSystem/XMS/EMS,
a SoundBlaster card for excellent sound compatibility with older games...
You can "re-live" the good old days with the help of DOSBox, it can run plenty
of the old classics that don't run on your new computer!
dose3-tools 5.0.1 12.20180821git2c1b8df.fc30 28157771 Unspecified Tools suite from the dose3 framework
Dose3 is a framework made of several OCaml libraries for managing
distribution packages and their dependencies.
This package contains the tools shipped with the dose3 framework
for manipulating packages of various formats.
dosfstools 4.1 8.fc30 378181 Unspecified Utilities for making and checking MS-DOS FAT filesystems on Linux
The dosfstools package includes the mkdosfs and dosfsck utilities,
which respectively make and check MS-DOS FAT filesystems on hard
drives or on floppies.
dot2tex 2.11.2 1.fc30 1119268 Unspecified A Graphviz to LaTeX converter
Dot2tex is a tool for converting graphs rendered by Graphviz to formats
that can be used with LaTeX.
dotconf 1.3 20.fc30 61544 Unspecified Libraries to parse configuration files
Dotconf is a library used to handle configuration files.
dotconf 1.3 20.fc30 62440 Unspecified Libraries to parse configuration files
Dotconf is a library used to handle configuration files.
dotconf-devel 1.3 20.fc30 67737 Unspecified Development files for dotconf
The dotconf-devel package contains libraries and header files for
developing applications that use dotconf.
dotconf-devel 1.3 20.fc30 67739 Unspecified Development files for dotconf
The dotconf-devel package contains libraries and header files for
developing applications that use dotconf.
double-conversion 3.0.0 4.fc30 105158 Unspecified Library providing binary-decimal and decimal-binary routines for IEEE doubles
Provides binary-decimal and decimal-binary routines for IEEE doubles.
The library consists of efficient conversion routines that have been
extracted from the V8 JavaScript engine. The code has been re-factored
and improved so that it can be used more easily in other projects.
double-conversion 3.0.0 4.fc30 98218 Unspecified Library providing binary-decimal and decimal-binary routines for IEEE doubles
Provides binary-decimal and decimal-binary routines for IEEE doubles.
The library consists of efficient conversion routines that have been
extracted from the V8 JavaScript engine. The code has been re-factored
and improved so that it can be used more easily in other projects.
double-conversion-devel 3.0.0 4.fc30 78729 Unspecified Library providing binary-decimal and decimal-binary routines for IEEE doubles
Contains header files for developing applications that use the double-conversion
library.
There is extensive documentation in src/double-conversion.h. Other
examples can be found in test/cctest/test-conversions.cc.
double-conversion-devel 3.0.0 4.fc30 78739 Unspecified Library providing binary-decimal and decimal-binary routines for IEEE doubles
Contains header files for developing applications that use the double-conversion
library.
There is extensive documentation in src/double-conversion.h. Other
examples can be found in test/cctest/test-conversions.cc.
double-conversion-static 3.0.0 4.fc30 158812 Unspecified Library providing binary-decimal and decimal-binary routines for IEEE doubles
Static double-conversion library.
double-conversion-static 3.0.0 4.fc30 180742 Unspecified Library providing binary-decimal and decimal-binary routines for IEEE doubles
Static double-conversion library.
douceur 0.2.0 6.fc30 7576595 Unspecified A simple CSS parser and inliner in Go
A simple CSS parser and inliner in Go
dovecot 2.3.4 2.fc30 17625920 System Environment/Daemons Secure imap and pop3 server
Dovecot is an IMAP server for Linux/UNIX-like systems, written with security
primarily in mind. It also contains a small POP3 server. It supports mail
in either of maildir or mbox formats.
The SQL drivers and authentication plug-ins are in their subpackages.
dovecot 2.3.4 2.fc30 17200308 System Environment/Daemons Secure imap and pop3 server
Dovecot is an IMAP server for Linux/UNIX-like systems, written with security
primarily in mind. It also contains a small POP3 server. It supports mail
in either of maildir or mbox formats.
The SQL drivers and authentication plug-ins are in their subpackages.
dovecot-devel 2.3.4 2.fc30 1649459 Development/Libraries Development files for dovecot
This package provides the development files for dovecot.
dovecot-devel 2.3.4 2.fc30 1649416 Development/Libraries Development files for dovecot
This package provides the development files for dovecot.
dovecot-mysql 2.3.4 2.fc30 31552 System Environment/Daemons MySQL back end for dovecot
This package provides the MySQL back end for dovecot-auth etc.
dovecot-pgsql 2.3.4 2.fc30 35648 System Environment/Daemons Postgres SQL back end for dovecot
This package provides the Postgres SQL back end for dovecot-auth etc.
dovecot-pigeonhole 2.3.4 2.fc30 1879080 System Environment/Daemons Sieve and managesieve plug-in for dovecot
This package provides sieve and managesieve plug-in for dovecot LDA.
doxy2man 0 9.20150625git.fc30 184750 Unspecified Create man pages from doxygen XML output
Doxy2man takes the XML generated by Doxygen as input and creates several
man pages from that. It creates a summary man page for a header and for
each function a detailed man page. The output is optimized for C projects.
It supports the most common doxygen features, e.g. implicit and explicit
see also tags, copyright, author information, brief and detailed
descriptions, etc.
doxygen 1.8.15 6.fc30 22133313 Unspecified A documentation system for C/C++
Doxygen can generate an online class browser (in HTML) and/or a
reference manual (in LaTeX) from a set of documented source files. The
documentation is extracted directly from the sources. Doxygen can
also be configured to extract the code structure from undocumented
source files.
doxygen-doxywizard 1.8.15 6.fc30 678836 Unspecified A GUI for creating and editing configuration files
Doxywizard is a GUI for creating and editing configuration files that
are used by doxygen.
doxygen-latex 1.8.15 6.fc30 0 Unspecified Support for producing latex/pdf output from doxygen
Support for producing latex/pdf output from doxygen.
dozer 5.5.1 9.fc30 452687 Unspecified Java Bean to Java Bean mapper
Dozer is a Java Bean to Java Bean mapper that recursively
copies data from one object to another. Typically, these
Java Beans will be of different complex types.
Dozer supports simple property mapping, complex type mapping,
bi-directional mapping, implicit-explicit mapping, as well as
recursive mapping. This includes mapping collection attributes
that also need mapping at the element level.
dozer-javadoc 5.5.1 9.fc30 5943140 Unspecified Javadoc for dozer
This package contains javadoc for dozer.
dpdk 17.11.2 6.fc30 6653548 Unspecified Set of libraries and drivers for fast packet processing
The Data Plane Development Kit is a set of libraries and drivers for
fast packet processing in the user space.
dpdk 17.11.2 6.fc30 6984184 Unspecified Set of libraries and drivers for fast packet processing
The Data Plane Development Kit is a set of libraries and drivers for
fast packet processing in the user space.
dpdk-devel 17.11.2 6.fc30 2124473 Unspecified Data Plane Development Kit development files
This package contains the headers and other files needed for developing
applications with the Data Plane Development Kit.
dpdk-devel 17.11.2 6.fc30 2144088 Unspecified Data Plane Development Kit development files
This package contains the headers and other files needed for developing
applications with the Data Plane Development Kit.
dpdk-doc 17.11.2 6.fc30 48771461 Unspecified Data Plane Development Kit API documentation
API programming documentation for the Data Plane Development Kit.
dpdk-examples 17.11.2 6.fc30 8389996 Unspecified Data Plane Development Kit example applications
Example applications utilizing the Data Plane Development Kit, such
as L2 and L3 forwarding.
dpdk-tools 17.11.2 6.fc30 218999 Unspecified Tools for setting up Data Plane Development Kit environment
Tools for setting up Data Plane Development Kit environment
dpkg 1.18.25 8.fc30 7000961 Unspecified Package maintenance system for Debian Linux
This package provides the low-level infrastructure for handling the
installation and removal of Debian software packages.
This package contains the tools (including dpkg-source) required
to unpack, build and upload Debian source packages.
This package also contains the programs dpkg which used to handle the
installation and removal of packages on a Debian system.
This package also contains dselect, an interface for managing the
installation and removal of packages on the system.
dpkg and dselect will certainly be non-functional on a rpm-based system
because packages dependencies will likely be unmet.
dpkg-dev 1.18.25 8.fc30 1374491 Unspecified Debian package development tools
This package provides the development tools (including dpkg-source)
required to unpack, build and upload Debian source packages.
.
Most Debian source packages will require additional tools to build;
for example, most packages need make and the C compiler gcc.
dpkg-devel 1.18.25 8.fc30 724628 Unspecified Debian package management static library
This package provides the header files and static library necessary to
develop software using dpkg, the same library used internally by dpkg.
Note though, that the API is to be considered volatile, and might change
at any time, use at your own risk.
dpkg-devel 1.18.25 8.fc30 870982 Unspecified Debian package management static library
This package provides the header files and static library necessary to
develop software using dpkg, the same library used internally by dpkg.
Note though, that the API is to be considered volatile, and might change
at any time, use at your own risk.
dpkg-perl 1.18.25 8.fc30 649784 Unspecified Dpkg perl modules
This package provides the perl modules used by the scripts
in dpkg-dev. They cover a wide range of functionality. Among them
there are the following public modules:
.
- Dpkg: core variables
- Dpkg::Arch: architecture handling functions
- Dpkg::Build::Info: build information functions
- Dpkg::BuildFlags: set, modify and query compilation build flags
- Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
- Dpkg::BuildProfile: parse and manipulate build profiles
- Dpkg::Changelog: parse changelogs
- Dpkg::Changelog::Entry: represents a changelog entry
- Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
- Dpkg::Checksums: generate and parse checksums
- Dpkg::Compression: simple database of available compression methods
- Dpkg::Compression::Process: wrapper around compression tools
- Dpkg::Compression::FileHandle: transparently (de)compress files
- Dpkg::Conf: parse dpkg configuration files
- Dpkg::Control: parse and manipulate Debian control information
(.dsc, .changes, Packages/Sources entries, etc.)
- Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
- Dpkg::Control::Fields: manage (list of known) control fields
- Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
- Dpkg::Control::Info: parse files like debian/control
- Dpkg::Control::Tests: parse files like debian/tests/control
- Dpkg::Deps: parse and manipulate dependencies
- Dpkg::Exit: push, pop and run exit handlers
- Dpkg::Gettext: wrapper around Locale::gettext
- Dpkg::IPC: spawn sub-processes and feed/retrieve data
- Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
example)
- Dpkg::Interface::Storable: base object serializer
- Dpkg::Path: common path handling functions
- Dpkg::Source::Package: extract Debian source packages
- Dpkg::Substvars: substitute variables in strings
- Dpkg::Vendor: identify current distribution vendor
- Dpkg::Version: parse and manipulate Debian package versions
.
All the packages listed in Suggests or Recommends are used by some of the
modules.
dpm 1.12.0 2.fc30 1631517 Unspecified Disk Pool Manager (DPM) client
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package contains the command line interfaces for the DPM.
dpm-contrib-admintools 0.2.4 1.fc28 118311 Applications/System DPM administration toolkit (contrib from GridPP)
This package provides a set of additional administration tools for the Disk
Pool Manager (DPM) service.
They provide easy to use commands to perform common sysadmin operations.
dpm-copy-server-mysql 1.12.0 2.fc30 854795 Unspecified DPM copy server with MySQL database back-end
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package provides a DPM copy server that uses MySQL as its
database back-end.
dpm-devel 1.12.0 2.fc30 342700 Unspecified DPM development libraries and header files
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package contains the development libraries and header files for DPM.
dpm-devel 1.12.0 2.fc30 342700 Unspecified DPM development libraries and header files
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package contains the development libraries and header files for DPM.
dpm-dsi 1.9.14 5.fc30 71540 Unspecified Disk Pool Manager (DPM) plugin for the Globus GridFTP server
The dpm-dsi package provides a Disk Pool Manager (DPM) plugin for the
Globus GridFTP server, following the Globus Data Storage Interface (DSI).
The Disk Pool Manager (DPM) is a lightweight storage solution for grid sites.
It offers a simple way to create a disk-based grid storage element and
supports relevant protocols (SRM, gridFTP, RFIO) for file
management and access.
Globus provides open source grid software, including a server implementation
of the GridFTP protocol. This plugin implements the DPM backend specifics
required to expose the data using this protocol.
dpm-libs 1.12.0 2.fc30 809932 Unspecified Disk Pool Manager (DPM) libraries
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package contains the run time DPM client library.
dpm-libs 1.12.0 2.fc30 758776 Unspecified Disk Pool Manager (DPM) libraries
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package contains the run time DPM client library.
dpm-name-server-mysql 1.12.0 2.fc30 343023 Unspecified DPM name server with MySQL database back-end
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package provides a DPM name server that uses MySQL as its database
back-end.
dpm-perl 1.12.0 2.fc30 934239 Unspecified Disk Pool Manager (DPM) perl bindings
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package provides Perl bindings for the DPM client library.
dpm-rfio-server 1.12.0 2.fc30 235388 Unspecified DPM RFIO server
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package provides a Remote File IO (RFIO) server for DPM.
dpm-server-mysql 1.12.0 2.fc30 366174 Unspecified Disk Pool Manager (DPM) server with MySQL database back-end
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package provides a DPM server that uses MySQL as its database
back-end.
dpm-srm-server-mysql 1.12.0 2.fc30 1967674 Unspecified DPM SRM server with MySQL database back-end
The LCG Disk Pool Manager (DPM) creates a storage element from a set
of disks. It provides several interfaces for storing and retrieving
data such as HTTP, gridftp and xroot.
This package provides a DPM SRM server that uses MySQL as its
database back-end.
dpm-xrootd 3.6.6 2.fc30 1791136 Unspecified XROOT interface to the Disk Pool Manager (DPM)
This package contains plugins for XROOTD to allow it to provide
access to DPM managed storage via the XROOT protocol.
dpm-xrootd-devel 3.6.6 2.fc30 186 Unspecified Development libraries and headers for the DPM XROOT interface
This package contains the development libraries and headers for the
DPM XROOT interface.
dpm-xrootd-devel 3.6.6 2.fc30 186 Unspecified Development libraries and headers for the DPM XROOT interface
This package contains the development libraries and headers for the
DPM XROOT interface.
dpsearch 4.54 0.16.20161203snap.fc30 2887022 Unspecified DataparkSearch Engine
DataparkSearch Engine is a full-featured open source web-based
search engine released under the GNU General Public License
and designed to organize search within a website, group of
websites, intranet or local system.
dpsearch-devel 4.54 0.16.20161203snap.fc30 1983364 Unspecified Development files for the DataparkSearch Engine
C development and header files for the DataparkSearch Engine.
dpsearch-devel 4.54 0.16.20161203snap.fc30 2035038 Unspecified Development files for the DataparkSearch Engine
C development and header files for the DataparkSearch Engine.
dput-ng 1.21 2.fc30 67529 Unspecified Next generation Debian package upload tool
dput-ng is a Debian package upload tool which provides an easy to use
interface to Debian (like) package archive hosting facilities. It allows
anyone who works with Debian packages to upload their work to a remote
service, including Debian's ftp-master, mentors.debian.net, Launchpad or other
package hosting facilities for Debian package maintainers.
dput-ng features many enhancements over dput, such as more comprehensive
checks, an easy to use plugin system, and code designed to handle the numerous
archives that any Debian package hacker will interact with.
dput-ng aims to be backwards compatible with dput in command-line flags,
configuration files, and expected behavior.
drabt 004 3.fc30 51686 Unspecified Proof checker for the DRAT proof format
DRABT is a proof checker for the DRAT proof format. Proofs compressed
with gzip, bzip2, xz, zip, and 7zip are supported, but the corresponding
decompression binary must be installed (i.e., gunzip, bunzip2, unxz,
unzip, or 7z).
dracut 049 26.git20181204.fc30 1063780 Unspecified Initramfs generator using udev
dracut contains tools to create bootable initramfses for the Linux
kernel. Unlike previous implementations, dracut hard-codes as little
as possible into the initramfs. dracut contains various modules which
are driven by the event-based udev. Having root on MD, DM, LVM2, LUKS
is supported as well as NFS, iSCSI, NBD, FCoE with the dracut-network
package.
dracut-caps 049 26.git20181204.fc30 3280 Unspecified dracut modules to build a dracut initramfs which drops capabilities
This package requires everything which is needed to build an
initramfs with dracut, which drops capabilities.
dracut-config-generic 049 26.git20181204.fc30 14 Unspecified dracut configuration to turn off hostonly image generation
This package provides the configuration to turn off the host specific initramfs
generation with dracut and generates a generic image by default.
dracut-config-rescue 049 26.git20181204.fc30 5002 Unspecified dracut configuration to turn on rescue image generation
This package provides the configuration to turn on the rescue initramfs
generation with dracut.
dracut-kiwi-lib 9.17.34 2.fc30 70369 Unspecified KIWI - Dracut kiwi Library
This package contains a collection of methods to provide a library
for tasks done in other kiwi dracut modules
dracut-kiwi-live 9.17.34 2.fc30 51054 Unspecified KIWI - Dracut module for iso(live) image type
This package contains the kiwi-live dracut module which is used
for booting iso(live) images built with KIWI
dracut-kiwi-oem-dump 9.17.34 2.fc30 53399 Unspecified KIWI - Dracut module for oem(install) image type
This package contains the kiwi-dump dracut module which is
used to install an oem image onto a target disk. It implements
a simple installer which allows for user selected target disk
or unattended installation to target. The source of the image
to install could be either from media(CD/DVD/USB) or from
remote
dracut-kiwi-oem-repart 9.17.34 2.fc30 45705 Unspecified KIWI - Dracut module for oem(repart) image type
This package contains the kiwi-repart dracut module which is
used to repartition the oem disk image to the current disk
geometry according to the setup in the kiwi image configuration
dracut-kiwi-overlay 9.17.34 2.fc30 40270 Unspecified KIWI - Dracut module for vmx(+overlay) image type
This package contains the kiwi-overlay dracut module which is used
for booting vmx images built with KIWI and configured to use an
overlay root filesystem
dracut-live 049 26.git20181204.fc30 32854 Unspecified dracut modules to build a dracut initramfs with live image capabilities
This package requires everything which is needed to build an
initramfs with dracut, with live image capabilities, like Live CDs.
dracut-modules-olpc 0.7.6 13.fc29 293954 Unspecified OLPC modules for dracut initramfs
Dracut initramfs modules to implement OLPC-specific features, including
antitheft, switching between OS updates, and the OLPC boot animation.
dracut-network 049 26.git20181204.fc30 159326 Unspecified dracut modules to build a dracut initramfs with network support
This package requires everything which is needed to build a generic
all purpose initramfs with network support with dracut.
dracut-squash 049 26.git20181204.fc30 2931 Unspecified dracut module to build an initramfs with most files in a squashfs image
This package provides a dracut module to build an initramfs, but store most files
in a squashfs image, result in a smaller initramfs size and reduce runtime memory
usage.
dracut-tools 049 26.git20181204.fc30 4421 Unspecified dracut tools to build the local initramfs
This package contains tools to assemble the local initrd and host configuration.
dragon 18.12.2 1.fc30 2802072 Unspecified Media player
Media player.
drascula 1.0 19.fc30 32896773 Unspecified The Vampire Strikes Back
You play the role of John Hacker, a British estate agent, who travels to a
small village of Transylvania in order to negotiate the sale of some ground
of Gibraltar with the Count Drascula.
But unfortunately Hacker is not aware of who is Drascula in reality: the most
terrible vampire with just one idea on his mind: DOMINATING the World
demonstrating that he is even more evil than his brother Vlad.
Notice that music for the game is available as an addon in the separate
drascula-music package. As are Spanish, German, French and Italian subtitles
in the drascula-international package.
drascula-de 1.0 17.fc30 722972 Unspecified German subtitles for Drascula: The Vampire Strikes Back
German subtitles for Drascula: The Vampire Strikes Back.
drascula-es 1.0 17.fc30 17209083 Unspecified Spanish subtitles for Drascula: The Vampire Strikes Back
Spanish subtitles for Drascula: The Vampire Strikes Back.
drascula-fr 1.0 17.fc30 724366 Unspecified French subtitles for Drascula: The Vampire Strikes Back
French subtitles for Drascula: The Vampire Strikes Back.
drascula-it 1.0 17.fc30 16212868 Unspecified Italian subtitles for Drascula: The Vampire Strikes Back
Italian subtitles for Drascula: The Vampire Strikes Back.
drascula-music 1.0 16.fc30 36470530 Unspecified Background music for Drascula: The Vampire Strikes Back
Background music for Drascula: The Vampire Strikes Back.
drat-tools 0.4.2 17.fc30 1777 Unspecified A reading text analysis tool
drat tool.
drawtiming 0.7.1 28.fc29 164040 Applications/Engineering A command line tool for generating timing diagrams
A command line tool for generating timing diagrams from
ASCII input files. The input files use a structured language
to represent signal state transitions and interdependencies.
Raster image output support is provided by ImageMagick.
It can be used for VHDL or verilog presentations.
drawtk 2.0 8.fc30 78607 Unspecified A C library to perform efficient 3D drawings
drawtk provides a C library to perform efficient 2D drawings. The drawing is
done by OpenGL which allow us fast and nice rendering of basic shapes, text,
images and video (file, webcam, network). It has been implemented as a thin
layer that hides the complexity of the OpenGL library.
drawtk 2.0 8.fc30 84147 Unspecified A C library to perform efficient 3D drawings
drawtk provides a C library to perform efficient 2D drawings. The drawing is
done by OpenGL which allow us fast and nice rendering of basic shapes, text,
images and video (file, webcam, network). It has been implemented as a thin
layer that hides the complexity of the OpenGL library.
drawtk-devel 2.0 8.fc30 75760 Unspecified A C library to perform efficient 3D drawings
Development files for drawtk library.
drawtk-devel 2.0 8.fc30 75762 Unspecified A C library to perform efficient 3D drawings
Development files for drawtk library.
drbd 9.5.0 2.fc30 28510 Unspecified DRBD user-land tools and scripts
DRBD refers to block devices designed as a building block to form high
availability (HA) clusters. This is done by mirroring a whole block device
via an assigned network. DRBD can be understood as network based raid-1.
This is a virtual package, installing the full user-land suite.
drbd-bash-completion 9.5.0 2.fc30 4814 Unspecified Programmable bash completion support for drbdadm
This package contains programmable bash completion support for the drbdadm
management utility.
drbd-pacemaker 9.5.0 2.fc30 45878 Unspecified Pacemaker resource agent for DRBD
This package contains the master/slave DRBD resource agent for the
Pacemaker High Availability cluster manager.
drbd-rgmanager 9.5.0 2.fc30 4878 Unspecified Red Hat Cluster Suite agent for DRBD
This package contains the DRBD resource agent for the Red Hat Cluster Suite
resource manager.
As of Red Hat Cluster Suite 3.0.1, the DRBD resource agent is included
in the Cluster distribution.
drbd-udev 9.5.0 2.fc30 967 Unspecified udev integration scripts for DRBD
This package contains udev helper scripts for DRBD, managing symlinks to
DRBD devices in /dev/drbd/by-res and /dev/drbd/by-disk.
drbd-utils 9.5.0 2.fc30 2019099 Unspecified Management utilities for DRBD
DRBD mirrors a block device over the network to another machine.
Think of it as networked raid 1. It is a building block for
setting up high availability (HA) clusters.
This packages includes the DRBD administration tools.
drbd-xen 9.5.0 2.fc30 8172 Unspecified Xen block device management script for DRBD
This package contains a Xen block device helper script for DRBD, capable of
promoting and demoting DRBD resources as necessary.
drbdlinks 1.28 5.fc30 58619 Unspecified Program for managing links into a DRBD shared partition
The drbdlinks program manages links into a DRBD partition which is shared
among several machines. A simple configuration file, "/etc/drbdlinks.conf",
specifies the links. This can be used to manage e.g. links for /etc/httpd,
/var/lib/pgsql and other system directories that need to appear as if they
are local to the system when running applications after the drbd shared
partition has been mounted.
When running drbdlinks with "start" as the mode, drbdlinks will rename the
existing files/directories and then make symbolic links into the DRBD
partition, "stop" does the reverse. By default, rename appends ".drbdlinks"
to the name, but this can be overridden.
An init script is included which runs "stop" before heartbeat starts, and
after heartbeat stops. This is done to try to ensure that when the shared
partition isn't mounted, the links are in their normal state.
dreamchess 0.3.0 0.5.20180601git.fc30 490220 Unspecified Portable chess game
DreamChess is an open source chess game.
Features:
- 3D OpenGL graphics
- various chess board sets: from classic wooden to flat figurines
- music, sound effects
- on-screen move lists using SAN notation
- undo functionality
- save-games in PGN format
A moderately strong chess engine as a sub-package: Dreamer.
dreamchess-data 0.3.0 0.5.20180601git.fc30 6653196 Unspecified Data files for the game DreamChess
Data files for the game DreamChess:
Boards, Pieces, Sounds, Styles, Themes.
dreamchess-engine 0.3.0 0.5.20180601git.fc30 218018 Unspecified A moderately strong chess engine for the game DreamChess
Should this chess engine be too weak for you, then you can use any other
XBoard-compatible chess engine, including the popular Crafty and GNU Chess.
dreampie 1.1.1 17.fc29 1200947 Development/Tools A graphical cross-platform interactive Python shell
DreamPie was designed from the ground up for an interactive Python
experience. It features a window divided into a history box and a code box,
automatic completion, automatic display of function arguments and
documentation, a result history that can be saved as HTML, automatic folding
of long outputs, etc.
dreampie-python3 1.1.1 17.fc29 112820 Development/Tools Support for running the python3 interpreter from dreampie
This package provides the files needed to run the python3 interpreter from
within dreampie.
dreamweb-common 1.1 9.fc30 192539398 Unspecified Common files used by dreamweb
This package contains common files used by dreamweb.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-de 1.1 9.fc30 180433470 Unspecified German language version of dreamweb
This package contains the German language version of dreamweb, a
click-and-point adventure with the look and feel of Ridley Scott's
Blade Runner.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-doc 1.1 9.fc30 215575995 Unspecified Documentation files for dreamweb
This package contains documentation files used by dreamweb. The
documentation contains manuals and other stuff delivered with the
retail package in high and low resolution quality. Additionally
it contains translated versions for all available language
versions of the game from those documents.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-es 1.1 9.fc30 50379180 Unspecified Spanish language version of dreamweb
This package contains the Spanish language version of dreamweb, a
click-and-point adventure with the look and feel of Ridley Scott's
Blade Runner.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-fr 1.1 9.fc30 4497146 Unspecified French language version of dreamweb
This package contains the French language version of dreamweb, a
click-and-point adventure with the look and feel of Ridley Scott's
Blade Runner.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-it 1.1 9.fc30 4494357 Unspecified Italian language version of dreamweb
This package contains the Italian language version of dreamweb, a
click-and-point adventure with the look and feel of Ridley Scott's
Blade Runner.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-uk 1.1 9.fc30 3396050 Unspecified UK-English language version of dreamweb
This package contains the UK-English language version of dreamweb, a
click-and-point adventure with the look and feel of Ridley Scott's
Blade Runner.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
dreamweb-us 1.1 9.fc30 4456247 Unspecified US-English language version of dreamweb
This package contains the US-English language version of dreamweb, a
click-and-point adventure with the look and feel of Ridley Scott's
Blade Runner.
Ryan, a bartender from a dystopian future can't sleep peacefully
for months. His nights are sequences of nightmares and strange
dreams, days with frequent black-outs with strange visions, until
one night a figure in monk attire appears to him, and tells him the
story of the seven evil ones, uniting to destroy to Dreamweb, the
only barrier between the world and darkness. The monk makes a
proposition: Ryan becomes the "deliverer": the one who would keep
the Dreamweb safe by killing those who try to destroy it.
Descending into paranoia and just wanting dreams to stop, Ryan
accepts the mission, then wakes up in a puddle of cold sweat, next
to his beloved girlfriend in her house, and late for work. Again.
DreamWeb is a top-down adventure game set in a gritty futuristic
dystopian city. Each location takes only a small portion of the
screen without panning (except an optional small zoom window in the
corner that follows the cursor), with the player interacting with
objects and people by simply clicking them. Ryan has a limited
inventory space, and as a lot of objects can be picked up (many
without any use), the player must rationalize what might be useful
and what just serves as filler.
Dialogue is straightforward, with no options, but still required
to advance in the game (to find new locations, for instance). In
situations where many adventure games usually feature an indirect
approach to solve a problem, Ryan often faces himself with
situations where it's "killed or be killed", which result in deaths
(sometimes of innocents).
drehatlas-warender-bibliothek-fonts 1.0.2.1 15.fc30 126614 Unspecified A Latin typeface that is decorative, surreal, and hairy
This font was created by Peter Schwanemann and originally based on a hand drawn
font created for a Pen & Paper RPG. Nowadays the font gets more and more
complete and should give the possibility of creating fantasy and/or decorative
logos, headings and other texts. The font was not created to be used in body
texts, as it is too complex and not as easy to read as a simple sans serif
font.
drehatlas-widelands-fonts 1.0.3.1 20.fc30 80307 Unspecified A Latin typeface inspired by feudal calligraphy
This font was created by Peter Schwanemann as a logo for the Widelands project,
but has since been enhanced. The font is decorative and not really usable for
real texts, but it looks nice for logos, banners or similar stuff. All normal
latin glyphs and arabic numbers are included and usable.
drehatlas-xaporho-fonts 1.0.3.3 18.fc30 49541 Unspecified A Latin typeface that is sharp and angular
The Xaporho font was originally inspired by the logo of a hobby rock band named
Xaporho.
drgeo 1.1.0 39.fc30 3157385 Unspecified Interactive educational geometry software
Dr. Geo is an interactive geometry GUI application. It allows one to create
geometric figures plus the interactive manipulation of such figure in
respect with their geometric constraints. It is usable in teaching
situation with students from primary or secondary level.
drgeo-doc 1.6 25.fc30 4138651 Unspecified Html documentation for drgeo
html documentation for drgeo
driconf 0.9.1 30.fc30 463583 Unspecified A configuration applet for the Direct Rendering Infrastructure
DRIconf is a configuration applet for the Direct Rendering Infrastructure.
It allows customizing performance and visual quality settings of OpenGL
drivers on a per-driver, per-screen and/or per-application level.
The settings are stored in system wide and per-user XML configuration files,
which are parsed by the OpenGL drivers on startup.
DRIConf is written in Python with the python-gtk toolkit bindings.
driftnet 0.1.6 40.20040426cvs.fc30 115658 Unspecified Network image sniffer
Driftnet is a program which listens to network traffic and picks out images
from TCP streams it observes. Fun to run on a host which sees lots of web
traffic.
driverctl 0.101 2.fc30 39252 Unspecified Device driver control utility
driverctl is a tool for manipulating and inspecting the system
device driver choices.
Devices are normally assigned to their sole designated kernel driver
by default. However in some situations it may be desireable to
override that default, for example to try an older driver to
work around a regression in a driver or to try an experimental alternative
driver. Another common use-case is pass-through drivers and driver
stubs to allow userspace to drive the device, such as in case of
virtualization.
driverctl integrates with udev to support overriding
driver selection for both cold- and hotplugged devices from the
moment of discovery, but can also change already assigned drivers,
assuming they are not in use by the system. The driver overrides
created by driverctl are persistent across system reboots
by default.
drm-utils 2.4.97 2.fc30 290320 Unspecified Direct Rendering Manager utilities
Utility programs for the kernel DRM interface. Will void your warranty.
drobo-utils 0.6.2.2 26.fc30 578931 Unspecified Utilities for managing Drobo storage systems
Drobo-utils is a set of Linux tools to query and manage Data Robotics Drobo
storage systems (Drobos). This base package provides the command line
utility.
drobo-utils-gui 0.6.2.2 26.fc30 58110 Unspecified GUI utilities for managing Drobo storage systems
Drobo-utils is a set of Linux tools to query and manage Data Robotics Drobo
storage systems (Drobos). This package provides a graphical utility.
dropbear 2019.78 1.fc30 789101 Unspecified Lightweight SSH server and client
Dropbear is a relatively small SSH server and client. It's particularly useful
for "embedded"-type Linux (or other Unix) systems, such as wireless routers.
dropbox-api-command 2.09 8.fc30 69633 Unspecified Dropbox API wrapper command
A command line tool to manage a directory synced with Dropbox.
dropwatch 1.5 7.fc30 59714 Unspecified Kernel dropped packet monitor
dropwatch is an utility to interface to the kernel to monitor for dropped
network packets.
drpm 0.3.0 15.fc30 194157 Unspecified A library for making, reading and applying deltarpm packages
The drpm package provides a library for making, reading and applying deltarpms,
compatible with the original deltarpm packages.
drpm 0.3.0 15.fc30 179301 Unspecified A library for making, reading and applying deltarpm packages
The drpm package provides a library for making, reading and applying deltarpms,
compatible with the original deltarpm packages.
drpm-devel 0.3.0 15.fc30 628621 Unspecified C interface for the drpm library
The drpm-devel package provides a C interface (drpm.h) for the drpm library.
drpm-devel 0.3.0 15.fc30 628621 Unspecified C interface for the drpm library
The drpm-devel package provides a C interface (drpm.h) for the drpm library.
drpmsync 3.6 29.fc30 120198 Unspecified Sync a file tree with deltarpms
This package contains a tool to sync a file tree with
deltarpms.
drraw 2.2 0.20.b2.fc30 228968 Unspecified Web based presentation front-end for RRDtool
drraw is a simple web based presentation front-end for RRDtool that allows you
to interactively build graphs of your own design. A graph definition can be
turned into a template which may be applied to many Round Robin Database files.
drraw specializes in providing an easy mean of displaying data stored with
RRDtool and does not care about how the data is collected, making it a great
complement to other RRDtool front-ends.
drraw-selinux 2.2 0.20.b2.fc30 0 Unspecified SELinux context for drraw
SElinux context for drraw.
drumkv1 0.9.2 2.fc30 1450669 Unspecified An old-school drum-kit sampler
drumkv1 is an old-school all-digital drum-kit sampler synthesizer with
stereo fx.
drumkv1 0.9.2 2.fc30 1493477 Unspecified An old-school drum-kit sampler
drumkv1 is an old-school all-digital drum-kit sampler synthesizer with
stereo fx.
drumstick 1.1.2 1.fc30 1667947 Unspecified C++/Qt5 wrapper around multiple MIDI interfaces
The drumstick library is a C++ wrapper around the ALSA library sequencer
interface, using Qt5 objects, idioms and style. OSS, network and Fluidsynth
interfaces are also supported by this library.
drumstick 1.1.2 1.fc30 1724215 Unspecified C++/Qt5 wrapper around multiple MIDI interfaces
The drumstick library is a C++ wrapper around the ALSA library sequencer
interface, using Qt5 objects, idioms and style. OSS, network and Fluidsynth
interfaces are also supported by this library.
drumstick-devel 1.1.2 1.fc30 9654350 Unspecified Developer files for drumstick
Developer files for drumstick.
drumstick-devel 1.1.2 1.fc30 9654356 Unspecified Developer files for drumstick
Developer files for drumstick.
drumstick-drumgrid 1.1.2 1.fc30 229461 Unspecified Drum Grid application from drumstick
This package contains the drumgrid application.
drumstick-examples 1.1.2 1.fc30 877752 Unspecified Example programs for drumstick
This package contains the test/example programs for drumstick.
drumstick-guiplayer 1.1.2 1.fc30 279353 Unspecified MIDI player from drumstick
This package contains the guiplayer application.
drumstick-vpiano 1.1.2 1.fc30 419597 Unspecified Virtual piano application from drumstick
This package contains the vpiano application.
drumstick0 0.5.0 24.fc30 908599 Unspecified C++/Qt4 wrapper around the ALSA library sequencer interface
The drumstick library is a C++ wrapper around the ALSA library sequencer
interface, using Qt4 objects, idioms and style. The ALSA sequencer interface
provides software support for MIDI technology on GNU/Linux.
drumstick0 0.5.0 24.fc30 916079 Unspecified C++/Qt4 wrapper around the ALSA library sequencer interface
The drumstick library is a C++ wrapper around the ALSA library sequencer
interface, using Qt4 objects, idioms and style. The ALSA sequencer interface
provides software support for MIDI technology on GNU/Linux.
drumstick0-devel 0.5.0 24.fc30 9350357 Unspecified Developer files for drumstick0
The drumstick0-devel package contains libraries and header files for
developing applications that use drumstick0.
drumstick0-devel 0.5.0 24.fc30 9350357 Unspecified Developer files for drumstick0
The drumstick0-devel package contains libraries and header files for
developing applications that use drumstick0.
drupal7 7.65 1.fc30 12711995 Unspecified An open-source content-management platform
Equipped with a powerful blend of features, Drupal is a Content Management
System written in PHP that can support a variety of websites ranging from
personal weblogs to large community-driven websites. Drupal is highly
configurable, skinnable, and secure.
drupal7-active_tags 2.0 0.15.alpha1.fc30 29342 Unspecified Enhanced tag widget for free tagging vocabularies
Active Tags adds a new option to free tagging taxonomies. If selected the
taxonomy widget is replaced by a new jQuery enabled tag entry widget.
This package provides the following Drupal 7 module:
* active_tags
drupal7-addressfield 1.2 8.fc30 414800 Unspecified Manage a flexible address field, implementing the xNAL standard
Address Field defines a new field type to store international postal
addresses, implementing a subset of the top-level address elements
defined in the xNAL standard [1].
The field configuration lets you determine which elements of an address
should be present in the field widget form and which ones should be
rendered for display.
This package provides the following Drupal module:
* addressfield
[1] http://xml.coverpages.org/xnal.html
drupal7-admin_language 1.0 0.11.dev.20130226.fc30 48102 Unspecified Displays administration pages in preferred language
This module lets the administrator see all administration pages in her
preferred language.
You can use this to display the front-end of the site in one language and still
keep most of the back-end in English (or another language of your choice).
You can use the standard Languages page to choose the language of the admin
pages.
This package provides the following Drupal module:
* admin_language
drupal7-admin_menu 3.0 0.13.rc6.fc30 177757 Unspecified Provides a drop-down menu to most administrative tasks
The module provides a theme-independent administration interface (aka.
navigation, back-end). It's a helper for novice users coming from other CMS,
a time-saver for site administrators, and useful for developers and site
builders.
Administrative links are displayed in a CSS/JS-based menu at the top on all
pages of your site. It not only contains regular menu items - tasks and actions
are also included, enabling fast access to any administrative resource your
Drupal site provides.
This package provides the following Drupal 7 module:
* admin_menu
drupal7-admin_theme 1.0 9.fc30 38408 Unspecified Drupal allows you to define a different theme for admin pages
Drupal allows you to define a different theme for administration pages. By
default this only applies to pages with a path starting with 'admin' and
content editing pages.
This package provides the following Drupal module(s):
* admin_theme
drupal7-advanced_help 1.3 9.fc30 200362 Unspecified Allows module developers to store their help outside the module system in html
The advanced help module allows module developers to store their help
outside the module system, in pure .html files. The files can be easily
translated simply by copying them into the right translations directory.
The entire system can appear in a pop-up or not as the module prefers.
drupal7-auto_nodetitle 1.0 14.fc30 30347 Unspecified A small and efficient module that allows hiding of the content title
This is a small and efficient module
that allows hiding of the content title field in the form.
To prevent empty content title fields one can configure it
to generate the title by a given pattern.
When the token module is installed
it's possible to use various node data for the
auto generated title - e.g. use the text of a CCK field (since 5.x).
Advanced users can also provide some PHP code,
that is used for automatically generating an appropriate title.
drupal7-backup_migrate 3.5 3.fc30 473802 Unspecified Backup the Drupal database and files or migrate them to another environment
Back up and restore your Drupal MySQL database, code, and files or migrate
a site between environments. Backup and Migrate supports gzip, bzip and zip
compression as well as automatic scheduled backups.
With Backup and Migrate you can dump some or all of your database tables to a
file download or save to a file on the server or offsite, and to restore from
an uploaded or previously saved database dump. You can choose which tables and
what data to backup and cache data is excluded by default.
Features:
* Backup/Restore multiple MySQL databases and code
* Backup of files directory is built into this version
* Add a note to backup files
* Smart delete options make it easier to manage backup files
* Backup to FTP/S3/Email or NodeSquirrel.com
* Drush integration
* Multiple backup schedules
* AES encryption for backups
This package provides the following Drupal module:
* backup_migrate
drupal7-block_class 2.3 6.fc30 39745 Unspecified Allows users to add classes via block configuration interface
Block Class allows users to add classes to any block through the block's
configuration interface. By adding a very short snippet of PHP to a theme's
block.tpl.php file, classes can be added to the parent <div class="block ...">
element of a block.
This package provides the following Drupal module:
* block_class
drupal7-boxes 1.2 8.fc30 83092 Unspecified Provides exports for custom blocks and spaces integration
Boxes module is a re-implementation of the custom blocks (boxes) that the core
block module provides. It is a proof of concept for what a re-worked block
module could do.
The module assumes that custom blocks are configuration, and not content. This
means that it is a reasonable action to ask for all blocks at one time, this is
in fact exactly what the core block module does.
Boxes provides an inline interface for editing blocks, allowing you to change
the contents of blocks without going to an admin page.
Boxes provides exportables for its blocks via the (required) Chaos tools module.
This allows modules to provide blocks in code that can be overwritten in the UI.
This package provides the following Drupal module:
* boxes
drupal7-calendar 3.5 9.fc30 298484 Unspecified This module will display any Views date field in calendar formats
This module will display any Views date field in calendar formats,
including CCK date fields, Event module event fields, node created or
updated dates, etc. Switch between year, month, and day views. Back and
next navigation is provided for all views.
drupal7-cck 3.0 0.9.alpha3.fc30 140277 Unspecified Miscellaneous field functions not handled by core
The Content Construction Kit allows you to add custom fields to nodes using a
web browser.
This package provides the following Drupal modules:
* cck
* content_migrate
drupal7-chosen 2.1 5.fc30 49029 Unspecified Makes select elements more user-friendly using Chosen
Uses the Chosen [1] jQuery plugin to make your <select> elements more
user-friendly.
This package provides the following Drupal module:
* chosen
[1] http://harvesthq.github.com/chosen/
drupal7-ckeditor 1.18 5.fc30 608826 Unspecified Enables the usage of CKEditor (WYSIWYG) instead of plain text fields
This module will allow Drupal to replace textarea fields with the CKEditor - a
visual HTML editor [1], usually called a WYSIWYG editor. This HTML text editor
brings many of the powerful WYSIWYG editing functions of known desktop editors
like Word to the web. It's very fast and doesn't require any kind of
installation on the client computer.
This package provides the following Drupal module:
* ckeditor
[1] http://ckeditor.com/
drupal7-context 3.7 6.fc30 295561 Unspecified Allows contextual conditions and reactions management
Context allows you to manage contextual conditions and reactions for different
portions of your site. You can think of each context as representing a "section"
of your site. For each context, you can choose the conditions that trigger this
context to be active and choose different aspects of Drupal that should react to
this active context.
Think of conditions as a set of rules that are checked during page load to see
what context is active. Any reactions that are associated with active contexts
are then fired.
This package provides the following Drupal modules:
* context
* context_layouts
* context_ui
drupal7-crumbs 2.6 4.fc30 339233 Unspecified The ultimate breadcrumbs module
Crumbs is a powerful breadcrumb-building machine, generating high-quality
breadcrumbs for most every page on your site, with minimal configuration.
The Crumbs engine takes advantage of the hierarchical nature inherent to
breadcrumbs: It calculates the parent of the current page, the parent of
the parent, etc, until it has the complete breadcrumb trail.
Crumbs uses plugins with fine-grained user-defined priorities, for each
step in this process. Plugins for most of your favorite modules are already
built-in, and you can add more.
A lot of stuff that would require laborious configuration with other
breadcrumb-building modules, does work out of the box with Crumbs. And if it
doesn't, there are powerful and ways to configure, customize and extend.
Where in other breadcrumb-customizing modules you need to define complete
breadcrumbs for various pages and their all their children, in Crumbs you
mostly just say "A is the parent of B", and it can solve all the rest of
the puzzle by itself.
This package provides the following Drupal modules:
* crumbs
* crumbs_example (requires manual install of xautoload)
* crumbs_labs
drupal7-cs_adaptive_image 1.0 11.fc30 38411 Unspecified Client-side adaptive image
The Client-side adaptive image module helps build responsive web designs with
fluid images by providing an Image field formatter that allows you to select
appropriate image styles for various client widths. With this module, you can
ensure that for each Image field only the most appropriately sized image gets
downloaded by the client.
You can serve light images to mobile users while still providing the best
quality images to visitors equipped with large screens.
Some highlights:
* Per-field configuration (for each view mode)
* Relies on JavaScript but provides a clean fallback for clients lacking it
* No cookies required
* No external libraries required
* No extra server configuration needed
* Does not attempt to perform any client OS detection
* Reverse proxy cache friendly
This package provides the following Drupal module:
* cs_adaptive_image
drupal7-ctools 1.12 6.fc30 1800548 Unspecified Primarily a set of APIs and tools to improve the developer experience
This suite is primarily a set of APIs and tools to improve the developer
experience. It also contains a module called the Page Manager whose job
is to manage pages. In particular it manages panel pages, but as it grows
it will be able to manage far more than just Panels.
For the moment, it includes the following tools:
* Plugins -- tools to make it easy for modules to let other modules implement
plugins from .inc files.
* Exportables -- tools to make it easier for modules to have objects that live
in database or live in code, such as 'default views'.
* AJAX responder -- tools to make it easier for the server to handle AJAX
requests and tell the client what to do with them.
* Form tools -- tools to make it easier for forms to deal with AJAX.
* Object caching -- tool to make it easier to edit an object across multiple
page requests and cache the editing work.
* Contexts -- the notion of wrapping objects in a unified wrapper and providing
an API to create and accept these contexts as input.
* Modal dialog -- tool to make it simple to put a form in a modal dialog.
* Dependent -- a simple form widget to make form items appear and disappear
based upon the selections in another item.
* Content -- pluggable content types used as panes in Panels and other modules
like Dashboard.
* Form wizard -- an API to make multi-step forms much easier.
* CSS tools -- tools to cache and sanitize CSS easily to make user-input CSS
safe.
This package provides the following Drupal modules:
* bulk_export
* ctools
* ctools_access_ruleset
* ctools_ajax_sample
* ctools_custom_content
* ctools_plugin_example
* page_manager
* stylizer
* term_depth
* views_content
drupal7-date 2.10 5.fc30 1005912 Unspecified Makes date/time fields available
This package contains both a flexible date/time field type Date field and a
Date API that other modules can use.
The D5 and D6 versions of the Date field require the Content Construction Kit
(CCK) module [1]. The D7 version works with the core Field functionality.
D8 includes Date in core.
The Drupal Handbook pages are at Date/Calendar Documentation [2].
This package provides the following Drupal 7 modules:
* date
* date_all_day
* date_api
* date_context
* date_migrate_example
* date_popup
* date_repeat
* date_repeat_field
* date_tools
* date_views
[1] http://drupal.org/project/cck
[2] http://drupal.org/node/262062
drupal7-date_ical 3.9 6.fc30 250176 Unspecified Enables import/export of iCal feeds
Date iCal is your one-stop shop for iCal support in Drupal. It provides a
plugin for Views to enable exporting your site's calendar as an iCal feed,
and a plugin for Feeds to enable importing external iCal feeds into your
site's calendar.
Any entity which contains a Date field can be utilized by Date iCal for import
and export of iCal feeds.
This package provides the following Drupal module:
* date_ical
drupal7-diff 3.3 6.fc30 178170 Unspecified Show differences between content revisions
This module adds a tab for sufficiently permissioned users. The tab
shows all revisions like standard Drupal but it also allows pretty
viewing of all added/changed/deleted words between revisions.
This package provides the following Drupal module:
* diff
drupal7-domain 3.13 6.fc30 690408 Unspecified A domain-based access control system
The Domain Access project is a suite of modules that provide tools for running
a group of affiliated sites from one Drupal installation and a single shared
database. The module allows you to share users, content, and configurations
across a group of sites such as:
* example.com
* one.example.com
* two.example.com
* my.example.com
* thisexample.com <-- can use any domain string
* example.com:3000 <-- treats non-standard ports as unique
By default, these sites share all tables in your Drupal installation. The
Domain Prefix module (for Drupal 6) allows for selective, dynamic table
prefixing for advanced users.
This package provides the following Drupal modules:
* domain
* domain_alias
* domain_conf
* domain_content
* domain_nav
* domain_settings
* domain_source
* domain_strict
* domain_theme
drupal7-domain_locale 1.0 0.14.beta6.fc30 78867 Unspecified Adds language handling functionality per domain basis
Domain Locale allows to customize language sets per domain for Drupal installs
using Domain Access and core Locale module. This module also offers drush
integration.
You need this module if:
* you want a different default language on different domains
* you want a different language set for each different domain
This package provides the following Drupal module:
* domain_locale
drupal7-domain_views 1.5 11.fc30 66943 Unspecified Provides Views integration for Domain Access
Provides Views integration for Domain Access.
This package provides the following Drupal module:
* domain_views
drupal7-drafty 1.0 0.8.rc1.fc30 73918 Unspecified Facilitates handling of draft revisions
API module for handling drafts of revisions.
This module doesn't provide any workflow handling, but it should provide robust
mechanisms for creating new revisions as drafts, publishing revisions, and
deletion of old drafts.
The goal of drafty is to be a dependency for workflow modules such as Workbench
Moderation [1], CPS [2] (and others). Currently, each of the workflow modules
has their own implementation for saving draft revisions.
[1] https://www.drupal.org/project/workbench_moderation
[2] https://www.drupal.org/project/cps
drupal7-drush_language 1.5 8.fc30 41981 Unspecified Drush language commands
Drush commands allowing languages to be added, switched, enabled, disabled,
imported and exported from the commandline. This module only provides drush
commands, so you will see no functionality in the UI.
This package provides the following Drupal module:
* drush_language
drupal7-ds 2.14 6.fc30 610316 Unspecified Extend the display options for every entity type
Display Suite allows you to take full control over how your content is displayed
using a drag and drop interface. Arrange your nodes, views, comments, user data
etc. the way you want without having to work your way through dozens of template
files. A predefined list of layouts (D7 only) is available for even more drag
and drop fun!
By defining custom view modes (build modes in D6), you can define how one piece
of content should be displayed in different places such as teaser lists, search
results, the full node, views etc.
Watch a screen-cast (http://drupal.org/node/644706) to see it all in action!
This package provides the following Drupal modules:
* ds
* ds_ui
* ds_devel (NOTE: Requires install of the devel module)
* ds_format
* ds_extras
* ds_search
* ds_forms
drupal7-email 1.3 9.fc30 37844 Unspecified Defines an email field type.
This module provides a field type for email addresses.
This package provides the following Drupal module:
* email
drupal7-entity 1.8 6.fc30 583917 Unspecified Extends the entity API to provide a unified way to deal with entities
This module extends the entity API of Drupal core in order to provide a unified
way to deal with entities and their properties. Additionally, it provides an
entity CRUD controller, which helps simplifying the creation of new entity
types.
This package provides the following Drupal modules:
* entity
* entity_token
drupal7-entity_translation 1.0 0.16.beta7.fc30 391889 Unspecified Allows entities to be translated into different languages
Allows (fieldable) entities to be translated into different languages,
by introducing entity/field translation for the new translatable fields
capability in Drupal 7. Maintained by the Drupal core i18n team.
This project does not replace the Internationalization
(http://drupal.org/project/i18n) project, which focuses on enabling a full
multilingual workflow for site admins/builders. Some features, e.g. content
language negotiation or taxonomy translation, might overlap but most of them
are unrelated.
This package provides the following Drupal modules:
* entity_translation
* entity_translation_i18n_menu (requires install of drupal7-i18n)
* entity_translation_upgrade
drupal7-eva 1.4 3.fc30 45593 Unspecified Provides a Views display type that can be attached to entities
"Eva" is short for "Entity Views Attachment;" it provides a Views display plugin
that allows the output of a View to be attached to the content of any Drupal
entity. The body of a node or comment, the profile of a user account, or the
listing page for a Taxonomy term are all examples of entity content.
The placement of the view in the entity's content can be reordered on the
"Field Display" administration page for that entity, like other fields added
using the Field UI module.
In addition, the unique ID of the entity the view is attached to -- as well as
any tokens generated from that entity -- can be passed in as arguments to the
view. For example, you might make a View that displays posts with an 'Author ID'
argument, then use Eva to attach the view to the User entity type. When a user
profile is displayed, the User's ID will be passed in as the argument to the
view magically.
drupal7-features 2.10 6.fc30 405226 Unspecified Provides feature management for Drupal
The features module enables the capture and management of features in Drupal.
A feature is a collection of Drupal entities which taken together satisfy a
certain use-case.
Features provides a UI and API for taking different site building components
from modules with exportables and bundling them together in a single feature
module. A feature module is like any other Drupal module except that it
declares its components (e.g. views, contexts, CCK fields, etc.) in its .info
file so that it can be checked, updated, or reverted programmatically.
This package provides the following Drupal module:
* features
drupal7-features_extra 1.0 7.fc30 109276 Unspecified Provides faux exportables of several site-building components
Features Extra provides faux exportables (via Features) of several
site-building components
This package provides the following Drupal modules:
* fe_block (requires manual install of block_class module only if running tests)
* fe_nodequeue (requires manual install of the nodequeue module)
* fe_profile
drupal7-feeds 2.0 0.22.beta4.fc30 2123918 Unspecified Aggregates RSS/Atom/RDF feeds, imports CSV files and more
Import or aggregate data as nodes, users, taxonomy terms or simple database
records.
This package provides the following Drupal modules:
* feeds
* feeds_import
* feeds_news (requires drupal7-features and drupal7-views)
* feeds_ui
drupal7-fences 1.2 7.fc30 130354 Unspecified Configurable field wrappers
Fences is a an easy-to-use tool to specify an HTML element for each field. This
element choice will propagate everywhere the field is used, such as teasers, RSS
feeds and Views. You don't have to keep re-configuring the same HTML element
over and over again every time you display the field.
Best of all, Fences provides leaner markup than Drupal 7 core! And can get rid
of the extraneous classes too!
This kind of tool is needed in order to create semantic HTML5 output from
Drupal. Without such a tool, you have to create custom field templates in your
theme for every field. :(
Similar projects include Semantic fields [1], Field Wrappers [2] and a tool
inside the Display Suite [3] extras.
This package provides the following Drupal module:
* fences
[1] http://drupal.org/project/semantic_fields
[2] http://drupal.org/project/field_wrappers
[3] http://drupal.org/project/ds
drupal7-field_permissions 1.0 6.fc30 84671 Unspecified Set field-level permissions to create, update or view fields
The Field Permissions module allows site administrators to set field-level
permissions to edit, view and create fields on any entity.
Features:
- Enable field permissions on any entity, not just nodes.
- Role-based field permissions allowing different viewing patterned based on
what access the user has.
- Author-level permissions allow viewing and editing of fields based on who
the entity owner is.
- Permissions for each field are not enabled by default. Instead,
administrators can enable these permissions explicitly for the fields
where this feature is needed.
- Field permissions overview
This package provides the following Drupal module:
* field_permissions
drupal7-file_entity 2.2 5.fc30 452345 Unspecified File entity (fieldable files)
File entity provides interfaces for managing files. It also extends the core
file entity, allowing files to be fieldable, grouped into types, viewed (using
display modes) and formatted using field formatters. File entity integrates
with a number of modules, exposing files to Views, Entity API, Token and more.
This package provides the following Drupal module:
* file_entity
drupal7-file_entity_inline 1.0 0.11.beta1.fc30 26976 Unspecified Makes field entities editable within other entities
This module aims to provide the ability to edit File entities [1] inline, as
part of another form (such as nodes). This should enable the ability for
reusable and site-wide editing of file properties, such as description,
alt text, captions, bylines, etc.
This package provides the following Drupal module:
* file_entity_inline
[1] http://drupal.org/project/file_entity
drupal7-fivestar 2.2 6.fc30 345903 Unspecified Enables fivestar ratings on content, users, etc
The Fivestar voting module adds a clean, attractive voting widget to nodes and
comments and any entity. It features:
* jQuery rollover effects and AJAX no-reload voting
* Configurable star sets
* Graceful degradation to an HTML rating form when JavaScript is turned off
* Support for anonymous voters
* Spam protection to keep users from filling your DB with bogus votes
* Easy-to-use integration with Views module for lists sorted by rating, or
filtered by min/max ratings
* A Fivestar CCK field for use in custom node types
* An easy-to-use Form API element type for use in other modules
* Compatible with all versions of jQuery (1.0 - 1.8)
This package provides the following Drupal module:
* fivestar
drupal7-flexifilter 1.0 0.13.beta1.fc30 144259 Unspecified Allows non-admins to create their own, configurable custom filters
Flexifilter is a module that allows non-admins to create their own,
configurable custom filters. It is not limited to simple text
replacement or regexp replacement; it includes logic such as if() and
while() statements, and is easily extendable by other modules.
drupal7-footnotes 2.5 16.fc30 53590 Unspecified Allows to easily create automatically numbered footnote references
Footnotes module can be used to easily create automatically numbered
footnote references into an article or post (such as a reference to a
URL).
drupal7-google_analytics 2.4 4.fc30 190698 Unspecified Adds the Google Analytics web statistics tracking system to your website
Adds the Google Analytics web statistics tracking system to your website.
This package provides the following Drupal module:
* googleanalytics
drupal7-honeypot 1.22 6.fc30 67075 Unspecified Mitigates spam form submissions using the honeypot method
Honeypot uses both the honeypot and timestamp methods of deterring spam bots
from completing forms on your Drupal site (read more here). These methods are
effective against many spam bots, and are not as intrusive as CAPTCHAs or other
methods which punish the user [YouTube].
The module currently supports enabling for all forms on the site, or particular
forms like user registration or password reset forms, webforms, contact forms,
node forms, and comment forms.
This package provides the following Drupal module:
* honeypot
drupal7-i18n 1.18 5.fc30 652340 Unspecified Enables multilingual content
This is a collection of modules to extend Drupal core multilingual capabilities
and be able to build real life multilingual sites. Some features:
* Taxonomy translation (both, per language terms and translatable terms)
* Multilingual variables
* Multilingual blocks (control visibility per language and translate title and
content)
* Language selection (when you switch the site language you'll see only the
content for that language)
Read a complete feature overview in the Internationalization handbook: Building
multilingual sites [1].
This package provides the following Drupal modules:
* i18n
* i18n_block
* i18n_contact
* i18n_field
* i18n_forum
* i18n_menu
* i18n_node
* i18n_path
* i18n_redirect
* i18n_select
* i18n_string
* i18n_sync
* i18n_taxonomy
* i18n_translation
* i18n_user
* i18n_variable
[1] https://www.drupal.org/node/133977
drupal7-i18n_boxes 1.0 11.fc30 24715 Unspecified Provides the ability to localize Boxes blocks
This module enables block titles and block content to be exported to code
(via boxes) and then be translated (via i18n_string).
This package provides the following Drupal module:
* i18n_boxes
drupal7-i18nviews 3.0 0.11.dev.20120724.fc30 67130 Unspecified Translate views using Internationalization
Translate views using Internationalization.
This package provides the following Drupal module:
* i18nviews
drupal7-job_scheduler 2.0 3.fc30 68625 Unspecified Simple API for scheduling tasks
Simple API for scheduling tasks once at a predetermined time or periodically at
a fixed interval.
This package provides the following Drupal modules:
* job_scheduler
* job_scheduler_trigger
drupal7-jquery_update 3.0 0.6.alpha5.fc30 6663389 Unspecified Upgrades the version of jQuery in Drupal core to a newer version of jQuery
Upgrades the version of jQuery in Drupal core to a newer version of jQuery.
This package provides the following Drupal module:
* jquery_update
drupal7-l10n_client 1.3 9.fc30 76612 Unspecified Provides on-page localization
This module helps you fix translations on your site as you see the issues.
Just by navigating around your pages, you'll be able to fix translations and
fill in missing ones using the on-page translation editor. At the same time,
if configured properly, the module also submits your translations back to the
community, to localize.drupal.org (http://localize.drupal.org/) or any other
localization server.
This package provides the following Drupal module:
* l10n_client
drupal7-l10n_pconfig 1.2 11.fc30 30752 Unspecified Plural formula configurator
The plural formula configurator sets sensible defaults for plural forms when
adding languages and lets you edit the plural formula for all languages on the
web interface.
Drupal does not expose these fields for editing due to the complexity of plural
forms. You should make sure to only give permissions to edit language details
to those, who will likely not screw up your plural formulas.
This package provides the following Drupal module:
* l10n_pconfig
drupal7-l10n_server 1.0 0.11.dev.20130220.fc30 520103 Unspecified Localization server
The localization server is a set of Drupal modules powering
http://localize.drupal.org/, https://translate.openatrium.com/,
http://localize.openpublishapp.com/ and even the non-Drupal based
http://translate.musescore.org/ among other translation communities.
It provides a generic translation database back-end with a community
localization user interface, which allows people to collaborate on
translating projects to different languages. It currently contains
tools to translate Drupal projects as well as general Gettext based
sources.
This package provides the following Drupal modules:
* l10n_community
* l10n_groups (NOTE: Requires install of the og module)
* l10n_remote
* l10n_packager
* l10n_server
* l10n_drupal
* l10n_gettext
drupal7-l10n_update 2.2 4.fc30 354692 Unspecified Provides automatic downloads and updates for translations
Automatically download and update your translations fetching them from
localize.drupal.org [1] or any other localization server [2].
This package provides the following Drupal module:
* l10n_update
[1] http://localize.drupal.org/
[2] http://drupal.org/project/l10n_server
drupal7-lang_dropdown 2.6 3.fc30 112220 Unspecified Provides a dropdown select to switch between available languages
Language Switcher Dropdown is a very simple module that exposes a new block,
similar to the default Language Switcher block provided by Locale module.
The new block allows site visitors to switch languages using a drop-down
select list instead of using hyperlinks.
The module also integrates well with Language Icons
(http://drupal.org/project/languageicons) module if installed.
This package provides the following Drupal module:
* lang_dropdown
drupal7-language_cookie 2.0 6.fc30 31644 Unspecified Allows usage of cookies to remember the user's last language
Adds an extra "Cookie" field to the Language Negotiation settings, allowing the
language to be set according to a cookie.
The cookie name, domain & expiration are configurable in the settings page.
This package provides the following Drupal module:
* language_cookie
drupal7-language_switcher 1.0 0.11.beta2.fc30 29052 Unspecified Language switcher
Language Switcher for Drupal 7 is an enhancement for core language switcher
block in local module. It's very useful for websites with multi-languages
where you want to display content in different languages side-by-side. Watch
this video (http://www.youtube.com/watch?v=SSRkwLOgC8w) to better understand
the concept.
Features:
* Divide your website page to a number of sections where each sections contains
nodes in one language.
This package provides the following Drupal module:
* language_switcher
drupal7-languageicons 1.1 8.fc30 45809 Unspecified Adds icons to language links
This module provides icons for language links, both for the Language
switcher block and (optionally) for node links. It is a spin-off from
Internationalization (i18n) package.
This package provides the following Drupal module:
* languageicons
drupal7-libraries 2.3 6.fc30 175623 Unspecified Allows version-dependent and shared usage of external libraries
Drupal 7 only has built-in support for non-external libraries via
hook_library(). But it is only suitable for drupal.org projects that bundle
their own library; i.e., the module author is the creator and vendor of the
library. Libraries API should be used for externally developed and
distributed libraries. A simple example would be a third-party jQuery
plugin.
This package provides the following Drupal module:
* libraries
drupal7-link 1.6 1.fc30 192001 Unspecified Defines simple link field types
The link module can be count to the top 50 modules in Drupal installations and
provides a standard custom content field for links. With this module links can
be added easily to any content types and profiles and include advanced
validating and different ways of storing internal or external links and URLs.
It also supports additional link text title, site wide tokens for titles and
title attributes, target attributes, CSS class attribution, static repeating
values, input conversion, and many more.
This package provides the following Drupal module:
* link
drupal7-locale_auto_import 1.0 11.fc30 32692 Unspecified Locale automatic import
Search within your modules/features for .po files and import them in the DB
within the right text group.
When you install a new module with translations, the Locale module
automatically imports them in the "Built-in interface" text group and chooses
the mode "Existing strings and the plural format are kept, only new strings
are added.". It's OK for mostly all modules but not for Features that can
contain Content types, Fields or Views.
This module recognizes the system name of the text group in the name of your
.po file and imports it to the right text group automatically.
The .po files will be searched in an "auto_translations" folder within your
modules/features instead of "translations".
This package provides the following Drupal module:
* locale_auto_import
drupal7-locale_cookie 1.0 13.fc30 22321 Unspecified Keeps track of the language by means of a cookie
This module adds a new method for language detection to Drupal 7, it keeps
track of the language by means of a cookie, so the language is preserved
no matter of the user is logged in or not. It also works for recurring users.
drupal7-login_destination 1.4 7.fc30 62490 Unspecified Customize the destination that the user is redirected to after login
The Login Destination module allows you to customize the destination
that a user is redirected to after logging in. The destination can be
an internal page or an external URL. It is possible to specify certain
conditions like referring pages or user roles and make the destination
depend upon them. You may use PHP snippets to provide custom
conditions and destinations. It also possible to keep users on the
currently visited page after logging in or out.
This package provides the following Drupal module:
* login_destination
drupal7-markdown 1.4 7.fc30 120047 Unspecified Enables the creation of forms and questionnaires
Provides Markdown filter integration for Drupal input formats. The Markdown
syntax is designed to co-exist with HTML, so you can set up input formats with
both HTML and Markdown support. It is also meant to be as human-readable as
possible when left as "source".
There are many different Markdown implementation. Markdown filter uses "PHP
Markdown extra" that includes many common and useful extensions to the original
Markdown. This includes tables, footnotes and definition lists.
This package provides the following Drupal 7 module:
* markdown
drupal7-mediawiki_api 1.0 0.18.rc1.fc30 24978 Unspecified Provides a MediaWiki syntax to html conversion input filter
This module provides an input filter which allows the conversion of content
marked up using MediaWiki syntax to html for display on your drupal site, by
using the "parse" feature of the MediaWiki API.
drupal7-menu_token 1.0 0.14.beta7.fc30 49901 Unspecified Provides tokens in menu items (links)
Menu Token module provides tokens, that could be used in title or in
path of menu items (links). For example, if you create a menu item with
path:"user/[current-user:uid]", the url will be changed "on fly" to:
"user/1" (assuming you are user 1).
Tokens are provided by Token [1] module. Menu Token allows to use both
global tokens and entity ones: node, user, term, etc. Entity tokens have
several methods of substitution: from context, random and user defined.
This package provides the following Drupal 7 module:
* menu_token
[1] https://www.drupal.org/project/token
drupal7-metatag 1.22 5.fc30 981905 Unspecified Adds support and an API to implement meta tags
The Metatag module allows you to automatically provide structured metadata,
aka "meta tags", about your website. In the context of search engine
optimization, when people refer to meta tags they are usually referring to
the meta description tag and the meta keywords tag that may help improve
the rankings and display of your site in search engine results.
Meta tags have additional uses like the Open Graph Protocol used by Facebook,
specifying the canonical location of content across multiple URLs or domains.
This project is the designated Drupal 7 a from-the-ground-up rewrite and
successor of the Nodewords module.
This package provides the following Drupal modules:
* metatag
* metatag_context (requires drupal7-context)
* metatag_dc
* metatag_devel
* metatag_facebook
* metatag_google_plus
* metatag_opengraph
* metatag_panels (requires drupal7-ctools and drupal7-token, as well as
manual install of panels)
* metatag_twitter_cards
* metatag_views (requires drupal7-views)
drupal7-migrate 2.8 7.fc30 1106155 Unspecified Import content from external sources
The migrate module provides a flexible framework for migrating content into
Drupal from other sources (e.g., when converting a web site from another CMS
to Drupal). Out-of-the-box, support for creating core Drupal objects such as
nodes, users, files, terms, and comments are included - it can easily be
extended for migrating other kinds of content. Content is imported and rolled
back using a bundled web interface (Migrate UI module) or included Drush
commands (strongly recommended [1]).
This package provides the following Drupal modules:
* migrate
* migrate_example
* migrate_example_baseball
* migrate_example_oracle
* migrate_ui
[1] https://www.drupal.org/node/1806824
drupal7-module_filter 2.1 5.fc30 112489 Unspecified Module filter gives the ability to quickly find the module
The modules list page can become quite big when dealing with a fairly large site
or even just a dev site meant for testing new
and various modules being considered.
What this module aims to accomplish is the ability to quickly find the module
you are looking for without having to rely on the browsers search feature
which more times than not shows you the module name in the 'Required by'
or 'Depends on' sections of the various modules
or even some other location on the page like a menu item.
This package provides the following Drupal module(s):
* module_filter
drupal7-panels 3.9 5.fc30 958730 Unspecified Allows a site administrator to create customized layouts
The Panels module allows a site administrator to create customized layouts for
multiple uses. At its core it is a drag and drop content manager that lets you
visually design a layout and place content within that layout. Integration with
other systems allows you to create nodes that use this, landing pages that use
this, and even override system pages such as taxonomy and the node page so that
you can customize the layout of your site with very fine grained permissions.
This package provides the following Drupal modules:
* panels
* panels_ipe
* panels_mini
* panels_node
* i18n_panels
drupal7-path_breadcrumbs 3.3 7.fc30 214874 Unspecified Allows creation of custom breadcrumbs for any page using contexts
Path breadcrumbs module helps you to create breadcrumbs for any page with any
selection rules and load any entity from the URL.
Features
* Breadcrumbs navigation may be added to any kind of page: static
(example: node/1) or dynamic (example: node/NID).
* You can load contexts from URL and use it like tokens for breadcrumb path or
title.
* You can use selection rules for every breadcrumbs navigation.
* Supports ALL tokens from Entity tokens module (part of Entity module).
* You can import/export breadcrumbs (supports single operations, Features and
Ctools bulk export).
* Breadcrumbs can be cloned to save you time while building navigation.
* Module provides rich snippets support for breadcrumbs (RDFa and Microdata).
* Module provides first/last/odd/even classes to every breadcrumb link.
* You can change breadcrumbs delimiter.
* Breadcrumbs could be hidden if they contain only one element.
* You can disable breadcrumbs and enable them later.
* All breadcrumb titles are translatable.
* Usable interface.
This package provides the following Drupal modules:
* path_breadcrumbs
* path_breadcrumbs_i18n (requires drupal7-i18n)
* path_breadcrumbs_ui
drupal7-pathauto 1.3 8.fc30 191297 Unspecified Automatically generates URL/path aliases for various kinds of content
The Pathauto module automatically generates URL/path aliases for various kinds
of content (nodes, taxonomy terms, users) without requiring the user to manually
specify the path alias. This allows you to have URL aliases like
/category/my-node-title instead of /node/123. The aliases are based upon a
"pattern" system that uses tokens which the administrator can change.
This package provides the following Drupal module:
* pathauto
drupal7-potx 3.0 0.6.alpha2.fc30 241729 Unspecified Translation template extractor
The Translation template extractor provides a web based and a command line
Gettext translation template extractor interface for Drupal as well as a
reusable API to look for translatable strings and translatability errors.
This tool is used under the hood at http://localize.drupal.org/ as well to
serve as a parsing machine for Drupal.org project releases.
This package provides the following Drupal module:
* potx
drupal7-profiler 2.0 4.fc30 55232 Unspecified Allows an install profile to be defined as a Drupal .info file
Profiler provides a new way to write install profiles. Gone are the days where
you needed to know all the quirks of Drupal's APIs in order to write a solid
install profile. Profiler allows you to quickly and easily create new install
profiles, as well as have 'Sub' Install Profiles, where one Install Profile
inherits from and extends another Install Profile.
This package provides the following Drupal module:
* profiler
drupal7-rpmbuild 7.65 1.fc30 3589 Unspecified Rpmbuild files for drupal7
Rpmbuild files for drupal7.
drupal7-rules 2.10 5.fc30 863825 Unspecified React on events and conditionally evaluate actions
The Rules module allows site administrators to define conditionally executed
actions based on occurring events (known as reactive or ECA rules). It's a
replacement with more features for the trigger module in core and the successor
of the Drupal 5 workflow-ng module.
This package provides the following Drupal modules:
* rules
* rules_admin
* rules_i18n
* rules_scheduler
drupal7-site_map 1.3 7.fc30 88516 Unspecified Provides a site map that gives visitors an overview of your site
This module provides a site map that gives visitors an overview of your site.
This package provides the following Drupal module:
* site_map
drupal7-stringoverrides 1.8 11.fc30 34716 Unspecified Provides a quick and easy way of replacing text
Provides a quick and easy way to replace any text on the site.
Features
* Easily replace anything that's passed through t()
* Locale support, allowing you to override strings in any language
* Ability to import/export *.po files, for easy migration from the Locale module
* Note that this is not a replacement to Locale as having thousands of overrides
can cause more pain then benefit. Use this only if you need a few easy text
changes.
This package provides the following Drupal modules:
* stringoverrides
* stringoverrides_migrate
drupal7-strongarm 2.0 11.fc30 34435 Unspecified Strongarm gives a way to override the default variable values
Strongarm gives site builders a way to override the default variable values
that Drupal core and contributed modules ship with. It is not an end user tool,
but a developer and site builder tool which provides an API and a limited UI.
drupal7-taxonomy_access_fix 2.4 3.fc30 27503 Unspecified Fixes the crooked access checks for Taxonomy pages
This module:
* adds 1 permission per vocabulary: "add terms in X"
* changes the way vocabulary specific permissions are handled
* changes the Taxonomy admin pages' access checks
* alters the vocabularies overview table to show only what you have access to
edit or delete
The module does what native Taxonomy lacks: more specific Taxonomy permissions
(and checking them correctly).
Note: In order to access the admin/structure/taxonomy page, you must first set
permissions for the desired vocabularies.
Note: A module can't add permissions to another module, so the extra "add terms
in X" permissions are located under "Taxonomy access fix" and not under
"Taxonomy".
This package provides the following Drupal module:
* taxonomy_access_fix
drupal7-theme-adaptivetheme 3.4 6.fc30 1045830 Unspecified Adaptivetheme is a powerful theme framework
Adaptivetheme is a powerful theme framework with smoking hot support
for mobile and tablet devices using responsive design techniques.
drupal7-theme-ninesixty 1.0 13.fc30 1446573 Unspecified Ninesixty theme for Drupal 7
This theme is based on the 960 Grid System by Nathan Smith. NineSixty
is a base theme with all the files provided by the 960 Grid System.
From the sketch sheets to all the styles from the framework are
included. There are a few modifications so it better fits into
Drupal. All the details are inside the README.txt file.
drupal7-theme-zen 6.4 6.fc30 1328930 Unspecified Zen is a powerful, yet simple, HTML5 starting theme
Zen is a powerful, yet simple, HTML5 starting theme with a responsive,
mobile-first grid design. If you are building your own standards-compliant
theme, you will find it much easier to start with Zen than to start with
Garland or Stark. This theme has fantastic online documentation
(http://drupal.org/node/193318) and tons of helpful code comments
in its' PHP, HTML, CSS and Sass.
drupal7-title 1.0 0.12.alpha9.fc30 104880 Unspecified Replaces entity legacy fields with regular fields
While working on the new content translation system
(http://api.drupal.org/api/group/field_language/7) for Drupal 7, we (the Drupal
core i18n team) faced the need to convert node titles to the Field API in order
to make nodes fully translatable.
We were not able to make this happen in Drupal 7 core so we decided to find a
solution for this in contrib: the idea is replacing node titles with fields Ã
la Automatic Nodetitles (http://drupal.org/project/auto_nodetitle).
This will be exploited by the related Entity Translation
(http://drupal.org/project/entity_translation) project.
This package provides the following Drupal module:
* title
drupal7-tmgmt 1.0 0.15.rc2.fc30 1268512 Unspecified Translation Management Tool
The Translation Management Tool (TMGMT) module provides a tool set for
translating content from different sources. The translation can be done
by people or translation services of all kinds. It builds on and uses
existing language tools and data structures in Drupal and can be used
in automated workflow scenarios.
This module does not make i18n or any other language module for Drupal
obsolete. It does only facilitate the translation process.
The second alpha has been released, huge improvements have been made
(see the release notes for details) and there's even more work to do.
Please test the new version and report any bugs that you can find.
Important: The external translator plugins (Microsoft, MyGengo, Nativy,
Supertext) have been moved to separate projects. When any of these plugins,
make sure to download them as well and then run update.php when updating.
This package provides the following Drupal modules:
* tmgmt
* tmgmt_entity
* tmgmt_entity_ui
* tmgmt_field
* tmgmt_file
* tmgmt_i18n_string
* tmgmt_language_combination
* tmgmt_local
* tmgmt_locale
* tmgmt_node
* tmgmt_node_ui
* tmgmt_ui
drupal7-token 1.7 5.fc30 186557 Unspecified Provides a user interface for the Token API and some missing core tokens
Tokens are small bits of text that can be placed into larger documents via
simple placeholders, like %site-name or [user]. The Token module provides
a central API for modules to use these tokens, and expose their own token
values.
Note that Token module doesn't provide any visible functions to the user
on its' own, it just provides token handling services for other modules.
This package provides the following Drupal module:
* token
drupal7-translation_helpers 1.0 12.fc30 22481 Unspecified Provides methods for other modules to use with translated content
Translation helpers enables other modules to respond to changes in the "source
translation" of a set of translated content. This functionality is useful for
modules that track data by the "source translation" (node.tnid value).
The module also provides other methods for modules to use with translated
content.
This package provides the following Drupal module:
* translation_helpers
drupal7-translation_overview 2.0 0.12.beta2.fc30 70545 Unspecified Provides an overview of the translation status of site's content
The Translation Overview page provides a table listing the site's nodes and
showing what's been translated into each language. It also lets you assign
priorities for translating nodes into the various languages.
For translations of taxonomy terms and menu items check out the Translation
table (http://drupal.org/project/translation_table) module.
This package provides the following Drupal module:
* translation_overview
drupal7-translation_table 1.0 0.11.beta1.fc30 48037 Unspecified UI for quick translation of dynamic strings
UI for quick translation of taxonomies and menus. The i18n module allows for
translation of taxonomy terms and menu items, but the process is tedious - you
need to look up strings you want to translate, there is no overview of what's
already translated etc.
This module presents your taxonomy terms or menu items in a table, and
each language has a corresponding column. Just fill out the translations
and click Save.
Requires the i18n module, and either taxonomy or menu string translation.
* menu item titles
* vocabulary names and taxonomy terms
* CCK field names and descriptions
* content type names and descriptions
* quick tab titles
This package provides the following Drupal module:
* translation_table
drupal7-transliteration 3.2 9.fc30 432823 Unspecified Converts non-Latin text to US-ASCII and sanitizes file names
Provides one-way string transliteration (romanization) and cleans file names
during upload by replacing unwanted characters.
Generally spoken, it takes Unicode text and tries to represent it in US-ASCII
characters (universally displayable, unaccented characters) by attempting to
transliterate the pronunciation expressed by the text in some other writing
system to Roman letters.
This package provides the following Drupal module:
* transliteration
drupal7-uuid 1.0 5.fc30 139644 Unspecified Adds support for universally unique identifiers
This module provides an API for adding universally unique identifiers (UUID) to
Drupal objects, most notably entities.
drupal7-variable 2.5 10.fc30 234809 Unspecified Provides a registry for meta-data about Drupal variables
Variable module provides a registry for meta-data about Drupal variables
and some extended Variable API and administration interface. So other modules
can know about your module's variables and they can be translated,
exported, etc. You'll get automatic variable edit forms, tokens, access
control and uninstall for free.
drupal7-views 3.18 4.fc30 3828055 Unspecified Create customized lists and queries from your database
You need Views if:
* You like the default front page view, but you find you want to sort it
differently.
* You like the default taxonomy/term view, but you find you want to sort it
differently; for example, alphabetically.
* You use /tracker, but you want to restrict it to posts of a certain type.
* You like the idea of the 'article' module, but it doesn't display articles
the way you like.
* You want a way to display a block with the 5 most recent posts of some
particular type.
* You want to provide 'unread forum posts'.
* You want a monthly archive similar to the typical Movable Type/Wordpress
archives that displays a link to the in the form of "Month, YYYY (X)" where
X is the number of posts that month, and displays them in a block. The links
lead to a simple list of posts for that month.
Views can do a lot more than that, but those are some of the obvious uses of
Views.
This package provides the following Drupal 7 modules:
* views
* views_ui
drupal7-views_bulk_operations 3.4 5.fc30 183979 Unspecified Provides a way of selecting multiple rows and applying operations to them
This module augments Views by allowing bulk operations to be executed on the
displayed rows. It does so by showing a checkbox in front of each node, and
adding a select box containing operations that can be applied. Drupal Core or
Rules actions can be used.
This package provides the following Drupal modules:
* views_bulk_operations
* actions_permissions
drupal7-views_rss 2.0 0.11.rc4.fc30 98408 Unspecified Provides a views plugin that allows fields in RSS feeds
This module allows users to take control of their feeds by providing a
fields-based views style plugin for RSS.
This package provides the following Drupal modules:
* views_rss
* views_rss_core
* views_rss_dc
drupal7-views_slideshow 3.9 5.fc30 198361 Unspecified Views Slideshow can be used to create a slideshow of any content
Views Slideshow can be used to create a slideshow of any content
(not just images) that can appear in a View.
Powered by jQuery, it is heavily customizable:
you may choose slideshow settings for each View you create.
This package provides the following Drupal module:
* views_slideshow
drupal7-votingapi 2.12 10.fc30 123476 Unspecified Provides a shared voting API for other modules
VotingAPI helps developers who want to use a standardized API and schema for
storing, retrieving, and tabulating votes for Drupal content.
Among other things, it supports:
* Rating of any content (comments, nodes, users, fish, whatever)
* Multi-criteria voting (rate a game based on video, audio, and replayability)
* Automatic tabulation of results (with support for different voting styles,
like 'percentage' and '+1/-1')
* Efficient caching of results (sorting and filtering doesn't require any
recalculation)
* Hooks for additional vote calculations
Note that this module does NOT directly expose any voting mechanisms to end
users. It's a framework designed to make life easier for other developers,
and to standardize voting data for consumption by other modules (like Views).
For some examples of simple voting systems based on VotingAPI, check
Is Useful [1], Fivestar [2], and Plus1 [3].
This package provides the following Drupal module:
* votingapi
[1] http://drupal.org/project/is_useful
[2] http://drupal.org/project/fivestar
[3] http://drupal.org/project/plus1
drupal7-webform 4.16 3.fc30 1169888 Unspecified Enables the creation of forms and questionnaires
Webform is the module for making forms and surveys in Drupal. After a
submission, users may be sent an e-mail "receipt" as well as sending a
notification to administrators. Results can be exported into Excel or
other spreadsheet applications. Webform also provides some basic statistical
review and has an extensive API for expanding its features.
Some good examples could be contests, personalized contact forms, or petitions.
Each of these could have a customized form for end-users to fill out. If you
need to build a lot of customized, one-off forms, Webform is a more suitable
solution than creating content types and using CCK or Field module. Explanation
of Webform vs. CCK (or Fields) [1].
This package provides the following Drupal 7 module:
* webform
[1] http://drupal.org/documentation/modules/webform#webform-vs-cck
drupal7-workbench 1.2 9.fc30 80676 Unspecified Provides overall improvements for managing content
Workbench provides overall improvements for managing content
that Drupal does not provide out of the box.
drupal7-workbench_moderation 3.0 6.fc30 282077 Unspecified Provides content moderation services
Workbench Moderation adds arbitrary moderation states to Drupal core's
"unpublished" and "published" node states, and affects the behavior of node
revisions when nodes are published. Moderation states are tracked per-revision;
rather than moderating nodes, Workbench Moderation moderates revisions.
This module provides the following Drupal module:
* workbench_moderation
drupal7-xmlsitemap 2.2 7.fc30 344040 Unspecified The XML sitemap module creates a sitemap
The XML sitemap module creates a sitemap
that conforms to the sitemaps.org specification.
This helps search engines to more intelligently crawl a website
and keep their results up to date.
The sitemap created by the module can be automatically submitted to Ask,
Google, Bing (formerly Windows Live Search), and Yahoo! search engines.
The module also comes with several submodules
that can add sitemap links for content,
menu items, taxonomy terms, and user profiles.
This package provides the following Drupal module(s):
* xmlsitemap
drupal8 8.6.13 1.fc30 56307018 Unspecified An open source content management platform
Drupal is an open source content management platform powering millions of
websites and applications. It’s built, used, and supported by an active and
diverse community of people around the world.
drupal8-httpd 8.6.13 1.fc30 10884 Unspecified HTTPD integration for drupal8
HTTPD integration for drupal8.
drupal8-rpmbuild 8.6.13 1.fc30 23424 Unspecified RPM build files for drupal8
RPM build files for drupal8.
drush 8.1.16 3.fc30 1992858 Unspecified Command line shell and scripting interface for Drupal
Drush is a command line shell and Unix scripting interface for Drupal. If you
are unfamiliar with shell scripting, reviewing the documentation for your shell
(e.g. man bash) or reading an online tutorial (e.g. search for "bash tutorial")
will help you get the most out of Drush.
Drush core ships with lots of useful commands for interacting with code like
modules/themes/profiles. Similarly, it runs update.php, executes sql queries
and DB migrations, and misc utilities like run cron or clear cache.
dselect 1.18.25 8.fc30 1561022 Unspecified Debian package management front-end
dselect is a high-level interface for managing the installation and
removal of Debian software packages.
Many users find dselect intimidating and new users may prefer to use apt-based
user interfaces.
dsi 1.0.7 17.fc30 443700 Unspecified Invading aliens type game
dsi is a simple game of invading aliens. You must stop those aliens from
landing on you. It features: smooth scrolling, high scores, 5 levels, simple
controls, sound effects, strategic game play, and a tiny footprint. The
graphics can be customized out of the box, without requiring any recompiling.
A simple definition file can be customized for coders.
dsniff 2.4 0.29.b1.fc30 628920 Unspecified Tools for network auditing and penetration testing
A collection of tools for network auditing and penetration testing. Dsniff,
filesnarf, mailsnarf, msgsnarf, urlsnarf and webspy allow to passively monitor
a network for interesting data (passwords, e-mail, files). Arpspoof, dnsspoof
and macof facilitate the interception of network traffic normally unavailable
to an attacker (e.g, due to layer-2 switching). Sshmitm and webmitm implement
active monkey-in-the-middle attacks against redirected SSH and HTTPS sessions
by exploiting weak bindings in ad-hoc PKI.
dspam 3.10.2 29.fc30 856068 Unspecified A library and Mail Delivery Agent for Bayesian SPAM filtering
The DSPAM agent masquerades as the email server's local delivery agent
and filters/learns spams using an advanced Bayesian statistical approach
(based on Baye's theorem of combined probabilities) which provides an
administratively maintenance-free, easy-learning Anti-Spam service
custom tailored to each individual user's behavior. Advanced because on
top of standard Bayesian filtering is also incorporated the use of
Chained Tokens, de-obfuscation, and other enhancements. DSPAM works
great with Sendmail, Exim and Postfix, and should work well with any
other MTA that supports an external local delivery agent (qmail, etc.)
dspam-client 3.10.2 29.fc30 85104 Unspecified The DSPAM client program used to talk to dspam daemon
The DSPAM client program communicates with a server to process emails.
dspam-devel 3.10.2 29.fc30 110581 Unspecified Development library and header files for libdspam
DSPAM has had its core engine moved into a separate library, libdspam.
This library can be used by developers to provide 'drop-in' spam
filtering for their mail client applications, other Anti-Spam tools, or
similar projects.
dspam-devel 3.10.2 29.fc30 110550 Unspecified Development library and header files for libdspam
DSPAM has had its core engine moved into a separate library, libdspam.
This library can be used by developers to provide 'drop-in' spam
filtering for their mail client applications, other Anti-Spam tools, or
similar projects.
dspam-hash 3.10.2 29.fc30 337128 Unspecified Hash storage driver for libdspam
The self-contained Hash-Based driver (inspired by Bill Yerazunis' CRM
Sparse Spectra algorithm) is the fastest solution by far and requires no
dependencies, supports an auto-extend feature to grow the file size as
needed, and is very fast and compact. It does, however, lack some
features (such as merged groups support) and uses a lot of memory to
mmap() users. The driver is thread-safe (required for running DSPAM in
server daemon mode).
dspam-libs 3.10.2 29.fc30 608936 Unspecified The DSPAM library core processing engines
The DSPAM core processing engine, also known as libdspam, provides all
critical spam filtering functions. The engine is embedded into other
DSPAM components (such as the agent) and is responsbile for the actual
filtering logic.
dspam-libs 3.10.2 29.fc30 610648 Unspecified The DSPAM library core processing engines
The DSPAM core processing engine, also known as libdspam, provides all
critical spam filtering functions. The engine is embedded into other
DSPAM components (such as the agent) and is responsbile for the actual
filtering logic.
dspam-mysql 3.10.2 29.fc30 74925 Unspecified MySQL storage driver for libdspam
MySQL driver for libdspam. The driver is thread-safe (required for
running DSPAM in server daemon mode).
dspam-pgsql 3.10.2 29.fc30 104800 Unspecified PostgreSQL storage driver for libdspam
PostgreSQL storage driver for libdspam. The driver is thread-safe
(required for running DSPAM in server daemon mode).
dspam-sqlite3 3.10.2 29.fc30 41685 Unspecified SQLite v3.x storage driver for libdspam
SQLite v3 storage driver for libdspam. The driver is not thread-safe
and should not be used in DSPAM server daemon mode.
dspam-web 3.10.2 29.fc30 447965 Unspecified Web-based interface for DSPAM
Web-based interface for DSPAM's powerful Anti-Spam engine.
dssi 1.1.1 17.fc30 153779 Unspecified Disposable Soft Synth Interface
Disposable Soft Synth Interface (DSSI, pronounced "dizzy") is a proposal for a
plugin API for software instruments (soft synths) with user interfaces,
permitting them to be hosted in-process by Linux audio applications. Think of
it as LADSPA-for-instruments, or something comparable to a simpler version of
VSTi.
dssi-amsynth-plugin 1.8.0 8.fc30 511642 Unspecified Amsynth dssi plugin
Amsynth plugin for the dssi audio API
dssi-calf-plugins 0.90.1 2.fc30 292 Unspecified Calf plugins in DSSI format
The Calf project aims at providing a set of high quality open source audio
plugins for musicians. All the included plugins are designed to be used with
multitrack software, as software replacement for instruments and guitar stomp
boxes.
This package contains DSSI synthesizers and effects, also GUI extensions.
dssi-devel 1.1.1 17.fc30 82813 Unspecified Libraries, includes, etc to develop DSSI applications
Libraries, include files, etc you can use to develop DSSI based applications.
dssi-devel 1.1.1 17.fc30 82813 Unspecified Libraries, includes, etc to develop DSSI applications
Libraries, include files, etc you can use to develop DSSI based applications.
dssi-examples 1.1.1 17.fc30 206304 Unspecified DSSI plugin examples
Example plugins for the Disposable Soft Synth Interface.
dssi-vst 0.9.2 21.fc30 272024 Unspecified VST plug-ins host
dssi-vst is an adapter that allows users of Linux audio software to take VST
and VSTi audio effects and instrument plug-ins compiled for Windows, and load
them into native LADSPA or DSSI plug-in hosts. Plug-ins run at full speed for
most audio processing, although their user interfaces are slower because of the
Windows emulation.
This package contains the DSSI host for the plug-ins.
dssi-vst-wine 0.9.2 21.fc30 298931 Unspecified VST plug-ins wrapper
dssi-vst is an adapter that allows users of Linux audio software to take VST
and VSTi audio effects and instrument plug-ins compiled for Windows, and load
them into native LADSPA or DSSI plug-in hosts. Plug-ins run at full speed for
most audio processing, although their user interfaces are slower because of the
Windows emulation.
This package contains the plug-in wrapper that works through wine.
dssp 3.0.0 5.fc30 929243 Unspecified Protein secondary structure assignment
The DSSP program standardizes protein secondary structure assignment.
DSSP is a database of secondary structure assignments (and much more)
for all protein entries in the Protein Data Bank (PDB). DSSP is also
the program that calculates DSSP entries from PDB entries. DSSP does
not predict secondary structure.
References:
"A series of PDB related databases for everyday needs.", Robbie
P. Joosten, Tim A.H. te Beek, Elmar Krieger, Maarten L. Hekkelman, Rob
W.W. Hooft, Reinhard Schneider, Chris Sander, and Gert Vriend.
Nucleic Acids Research 2011 January; 39(Database issue): D411-D419.
doi: 10.1093/nar/gkq1105
"Dictionary of protein secondary structure: pattern recognition of
hydrogen-bonded and geometrical features.", Kabsch W, Sander C,
Biopolymers. 1983 22 2577-2637.
dsymbol 20181014gitec28618 8.fc30 2732521 Unspecified Symbol lookup support for libdparse
Symbol lookup support for libdparse.
dsymbol 20181014gitec28618 8.fc30 2977849 Unspecified Symbol lookup support for libdparse
Symbol lookup support for libdparse.
dsymbol-devel 20181014gitec28618 8.fc30 423426 Unspecified Development files for dsymbol
dsymbol-devel package contains header files for developing D applications
that use dsymbol.
dsymbol-devel 20181014gitec28618 8.fc30 423428 Unspecified Development files for dsymbol
dsymbol-devel package contains header files for developing D applications
that use dsymbol.
dsymbol-geany-tags 20181014gitec28618 8.fc30 16965 Unspecified Support for enable autocompletion in geany
Enable autocompletion for dsymbol library in geany (IDE)
dt 21.27.git8d78d78 2.fc30 1317722 Unspecified Generic data test program
dt is a generic data test program used to verify proper operation of
peripherals, file systems, device drivers, or any data stream supported by the
operating system. In its' simplest mode of operation, dt writes and then
verifies its' default data pattern, then displays performance statistics and
other test parameters before exiting. Since verification of data is performed,
dt can be thought of as a generic diagnostic tool.
dt command lines are similar to the dd program, which is popular on most UNIX
systems. It contains numerous options to give the user control of various test
parameters.
dt has been used to successfully test disks, tapes, serial lines, parallel
lines, pipes, and memory mapped files. In fact, dt can be used for any device
that allows the standard open, read, write, and close system calls. Special
support is necessary for some devices, such as serial lines, for setting up the
speed, parity, data bits, etc.
Available documentation is located in /usr/share/doc/dt. Sample
scripts and config data are installed in /usr/share/dt.
dtach 0.9 7.fc30 68415 Unspecified A simple program that emulates the detach feature of screen
dtach is a program that emulates the detach feature of screen, with
less overhead. It is designed to be transparent and un-intrusive; it
avoids interpreting the input and output between attached terminals
and the program under its control. Consequently, it works best with
full-screen applications such as emacs.
dtc 1.4.7 3.fc30 407461 Unspecified Device Tree Compiler
Devicetree is a data structure for describing hardware. Rather than hard coding
every detail of a device into an operating system, many aspects of the hardware
can be described in a data structure that is passed to the operating system at
boot time. The devicetree is used by OpenFirmware, OpenPOWER Abstraction Layer
(OPAL), Power Architecture Platform Requirements (PAPR) and in the standalone
Flattened Device Tree (FDT) form.
dtdinst 20151127 6.fc30 195444 Unspecified XML DTD to XML instance format converter
DTDinst is a program for converting XML DTDs into an XML instance
format.
dtdparser 1.21 23.fc30 66316 Unspecified A Java DTD Parser
DTD parsers for Java seem to be pretty scarce. That's probably because
DTD isn't valid XML. At some point, if/when XML Schema becomes widely
accepted, no one will need DTD parsers anymore. Until then, you can
use this library to parse a DTD.
dtdparser-javadoc 1.21 23.fc30 477829 Unspecified Javadoc for dtdparser
This package contains API documentation for dtdparser.
dtkcore 2.0.9.17 2.fc30 1241777 Unspecified Deepin tool kit core modules
Deepin tool kit core modules.
dtkcore 2.0.9.17 2.fc30 1158541 Unspecified Deepin tool kit core modules
Deepin tool kit core modules.
dtkcore-devel 2.0.9.17 2.fc30 85447 Unspecified Development package for dtkcore
Header files and libraries for dtkcore.
dtkcore-devel 2.0.9.17 2.fc30 85451 Unspecified Development package for dtkcore
Header files and libraries for dtkcore.
dtksettings 0.1.7 7.git34d321e.fc30 504305 Unspecified Dtk module to generate user configuration and UI dialog from json
This package provides a Dtk module which can generate user configuration and UI
dialog from json.
dtksettings 0.1.7 7.git34d321e.fc30 480701 Unspecified Dtk module to generate user configuration and UI dialog from json
This package provides a Dtk module which can generate user configuration and UI
dialog from json.
dtksettings-devel 0.1.7 7.git34d321e.fc30 16172 Unspecified Development package for dtksettings
Header files and libraries for dtksettings.
dtksettings-devel 0.1.7 7.git34d321e.fc30 16176 Unspecified Development package for dtksettings
Header files and libraries for dtksettings.
dtkwidget 2.0.9.17 2.fc30 3415207 Unspecified Deepin tool kit widget modules
DtkWidget is Deepin graphical user interface for deepin desktop development.
dtkwidget 2.0.9.17 2.fc30 3502495 Unspecified Deepin tool kit widget modules
DtkWidget is Deepin graphical user interface for deepin desktop development.
dtkwidget-devel 2.0.9.17 2.fc30 242667 Unspecified Development package for dtkwidget
Header files and libraries for dtkwidget.
dtkwidget-devel 2.0.9.17 2.fc30 242675 Unspecified Development package for dtkwidget
Header files and libraries for dtkwidget.
dtkwm 2.0.9 3.fc30 105530 Unspecified Deepin graphical user interface library
DtkWm is used to handle double screen for deepin desktop development.
This package contains the shared libraries.
dtkwm 2.0.9 3.fc30 106814 Unspecified Deepin graphical user interface library
DtkWm is used to handle double screen for deepin desktop development.
This package contains the shared libraries.
dtkwm-devel 2.0.9 3.fc30 5437 Unspecified Development package for dtkwm
Header files and libraries for dtkwm.
dtkwm-devel 2.0.9 3.fc30 5445 Unspecified Development package for dtkwm
Header files and libraries for dtkwm.
dtrx 7.1 13.fc29 100367 Applications/Archiving Intelligent archive extractor
dtrx extracts archives in a number of different formats; it currently
supports tar, zip (including self-extracting .exe files), cpio, rpm, deb,
gem, 7z, cab, rar (if unrar is installed), lhz (if lha is installed),
and InstallShield files.
It can also decompress files compressed with gzip, bzip2, lzma, xz,or compress.
In addition to providing one command to handle many different archive
types, dtrx also aids the user by extracting contents consistently. By
default, everything will be written to a dedicated directory that's named
after the archive. dtrx will also change the permissions to ensure that the
owner can read and write all those files.
dtv-scan-tables 1 9.20180606gitc2b6af67f7d8.fc30.1 7412320 Unspecified Digital TV scan tables
This package contains digital TV scan tables that are used by TV applications
to scan for channels.
dtv-scan-tables-legacy 1 9.20180606gitc2b6af67f7d8.fc30.1 377274 Unspecified Digital TV scan tables in the legacy DVBv3 format
This package contains digital TV scan tables that are used by TV applications
to scan for channels in the legacy DVBv3 format, compatible with the old
dvb-apps.
dualscreen-mouse-utils 0.5 19.fc30 63302 Unspecified Utilities for use with dual head setups using independent screens
Utilities for use with old-school dual head setups: namely not
twinview / one big desktop, but rather two X screens.
mouse-switchscreen:
Change the mouse cursor from one screen to the other. Remembers the previous
mouse position for each screen.
mouse-wrapscreen:
If you have an xorg.conf where both X screens are "separated" on the X
coordinates, then the mouse cursor cannot cross. Which is sometimes desired,
and sometimes not. Using mouse-wrapscreen you can configure them to be
"uncrossable", and then run it in the background when you do want to be able
to cross the cursor.
duckduckgo 0.008 13.fc30 22338 Unspecified Command line tool to use the DuckDuckGo API
This application queries the DuckDuckGo API and displays the result in
a nice human-readable way or in a batch mode which could be used by a
shell script to automatically work with the DuckDuckGo API results.
duel3 0.1 0.28.20060225.fc30 6725674 Unspecified One on one spaceship duel in a 2D arena
The sudden attack from the Martain Rim miners caught the Earth by surprise,
there was no way the meager Earth Space Fleet could defend themselves. The
miners attacked, and eliminated their enemies, and then returned to the
asteroid belt. However, Earth could not accept such an embarrassing defeat. The
military developed new space fighters, and trained several squadrons of elite
pilots. The task force was then deployed against the miners. These trained
pilots utterly defeated the miners in a matter of weeks, and the first space
war in human history was finished.
The military, however, now had a new problem on their hands. These new elite
pilots were becoming restless, and there was no way for them to test their
skills. The military dare not disband the force, or let their skills dull, so
the Duel Combat League was formed. The newly formed league quickly became the
premier entertainment form on the planet, and the military's largest source of
income.
Take control of a Duel fighter, and test your skills against your opponents and
the arena itself in fast-paced space combat.
duff 0.5.2 17.fc30 85953 Unspecified Quickly find duplicate files
Duff is a command-line utility for quickly finding duplicates in a given set of
files
duktape 2.2.0 4.fc30 557788 Unspecified Embeddable Javascript engine
Duktape is an embeddable Javascript engine, with a focus on portability and
compact footprint.
duktape 2.2.0 4.fc30 560712 Unspecified Embeddable Javascript engine
Duktape is an embeddable Javascript engine, with a focus on portability and
compact footprint.
duktape-devel 2.2.0 4.fc30 447950 Unspecified Development files for duktape
Embeddable Javascript engine.
This package contains header files and libraries needed to develop
application that use duktape.
duktape-devel 2.2.0 4.fc30 447952 Unspecified Development files for duktape
Embeddable Javascript engine.
This package contains header files and libraries needed to develop
application that use duktape.
dulwich-core 0.19.11 1.fc30 61331 Unspecified Shared files for Dulwich
Files to ensure functionality for both python2 and python3 packages of Dulwich.
dumb 0.9.3 29.fc30 459893 Unspecified IT, XM, S3M and MOD player library
IT, XM, S3M and MOD player library. Mainly targeted for use with the allegro
game programming library, but it can be used without allegro. Faithful to the
original trackers, especially IT.
dumb 0.9.3 29.fc30 471405 Unspecified IT, XM, S3M and MOD player library
IT, XM, S3M and MOD player library. Mainly targeted for use with the allegro
game programming library, but it can be used without allegro. Faithful to the
original trackers, especially IT.
dumb-devel 0.9.3 29.fc30 188485 Unspecified Development libraries and headers for dumb
The developmental files that must be installed in order to compile
applications which use dumb.
dumb-devel 0.9.3 29.fc30 188485 Unspecified Development libraries and headers for dumb
The developmental files that must be installed in order to compile
applications which use dumb.
dumb-init 1.1.3 17.fc30 35186 Unspecified Entry-point for containers that proxies signals
dumb-init is a simple process supervisor and init system designed to run as
PID 1 inside minimal container environments (such as Docker).
* It can handle orphaned zombie processes.
* It can pass signals properly for simple containers.
dumbster 1.6 20.fc24 21687 Development/Tools Fake SMTP Server
The Dumbster is a very simple fake SMTP server designed for
unit and system testing applications that send email messages.
It responds to all standard SMTP commands but does not deliver
messages to the user. The messages are stored within the
Dumbster for later extraction and verification.
dumbster-javadoc 1.6 20.fc24 173940 Documentation Javadoc for dumbster
Javadoc for dumbster.
dump 0.4 0.39.b46.fc30 388688 Unspecified Programs for backing up and restoring ext2/ext3/ext4 filesystems
The dump package contains both dump and restore. Dump examines files
in a filesystem, determines which ones need to be backed up, and
copies those files to a specified disk, tape, or other storage medium.
The restore command performs the inverse function of dump; it can
restore a full backup of a filesystem. Subsequent incremental backups
can then be layered on top of the full backup. Single files and
directory subtrees may also be restored from full or partial backups.
Install dump if you need a system for both backing up filesystems and
restoring filesystems after backups.
dumpasn1 20170309 5.fc30 282939 Unspecified ASN.1 object dump utility
dumpasn1 is an ASN.1 object dump program that will dump data encoded
using any of the ASN.1 encoding rules in a variety of user-specified
formats.
dumpet 2.1 18.fc30 49804 Unspecified A tool to dump and debug bootable CD images
DumpET is a utility to aid in the debugging of bootable CD-ROM images.
dunst 1.3.2 3.fc30 125457 Unspecified Simple and configurable notification-daemon
Dunst is a highly configurable and lightweight notification daemon with the
similar look and feel to dmenu.
duperemove 0.11 4.fc30 334429 Unspecified Tools for deduping file systems
Duperemove is a simple tool for finding duplicated extents and
submitting them for deduplication. When given a list of files it will
hash their contents on a block by block basis and compare those hashes
to each other, finding and categorizing extents that match each other.
When given the -d option, duperemove will submit those extents for
deduplication using the btrfs-extent-same ioctl.
duplicity 0.7.18.2 2.fc30 2548202 Unspecified Encrypted bandwidth-efficient backup using rsync algorithm
Duplicity incrementally backs up files and directory by encrypting
tar-format volumes with GnuPG and uploading them to a remote (or
local) file server. In theory many protocols for connecting to a
file server could be supported; so far ssh/scp, local file access,
rsync, ftp, HSI, WebDAV and Amazon S3 have been written.
Because duplicity uses librsync, the incremental archives are space
efficient and only record the parts of files that have changed since
the last backup. Currently duplicity supports deleted files, full
unix permissions, directories, symbolic links, fifos, device files,
but not hard links.
duply 2.2 1.fc30 114580 Unspecified Wrapper for duplicity
duply is a frontend for the mighty duplicity magic. It simplifies
running duplicity with cron or on command line by:
- keeping recurring settings in profiles per backup job
- automated import/export of keys between profile and keyring
- enabling batch operations e.g. backup_verify_purge
- executing pre/post scripts
- precondition checking for flawless duplicity operation
Since version 1.5.0 all duplicity backends are supported. Hence the
name changed from ftplicity to duply.
dustin-domestic-manners-fonts 20030527 19.fc30 90506 Unspecified Handwriting font by Dustin Norlander
This font mimics the authors handwriting. The name comes from the book
Domestic Manners of the Americans, by Fanny Trollope.
Font contains, letters, numbers, punctuation, accented characters and
some special characters (most European Latin characters).
dustin-dustismo-fonts-common 20030318 20.fc30 19323 Unspecified Common files for dustin-dustismo-fonts
General purpose fonts by Dustin Norlander available in
serif and sans-serif versions. The fonts cover all European Latin characters.
This package consists of files used by other dustin-dustismo-fonts packages.
dustin-dustismo-roman-fonts 20030318 20.fc30 316060 Unspecified General purpose serif font
General purpose fonts by Dustin Norlander available in
serif and sans-serif versions. The fonts cover all European Latin characters.
General purpose serif font with bold, italic and bold-italic variations
dustin-dustismo-sans-fonts 20030318 20.fc30 229780 Unspecified General purpos sans-serif fonts
General purpose fonts by Dustin Norlander available in
serif and sans-serif versions. The fonts cover all European Latin characters.
General purpose sans-serif font with bold, italic and bold-italic variations
dustmite 1 43.20150515git3498068.fc30 1680396 Unspecified Minimizes D source code for debugging
DustMite is a tool which minimizes D source code. It was inspired by Tigris
Delta and a thread on digitalmars.D.learn.
DustMite will parse the source code into a simple hierarchy, and attempt to
shrink it by deleting fragments iteratively, as long as the result satisfies
a user-specified condition.
dvb-apps 1.1.2 12.1505.3d43b280298c.fc26 632690 Unspecified Utility, demo and test applications using the Linux DVB API
The LinuxTV dvb-apps package contains some Linux DVB API applications and a set
of utilities that both the developer and end user alike will find quite useful.
Specifically, the utilities are geared towards the initial setup, testing, and
operation of a DVB device, whether it be of the software decoding or hardware
decoding type.
dvblast 3.4 2.fc30 497816 Unspecified Simple and powerful streaming application
DVBlast is a simple and powerful streaming application based on the
linux-dvb API. It opens a DVB device, tunes it, places PID filters,
configures a CAM module, and demultiplexes the packets to several RTP
outputs. It supports the new S2API of linux-dvb (compile option).
dvblinkremote 0.2.0 0.16.beta.fc30 72376 Unspecified Tool for interacting with a DVBLink Connect! Server
A command line tool for interacting with a DVBLink Connect! Server using the
DVBLink Remote API.
dvblinkremote-devel 0.2.0 0.16.beta.fc30 134813 Unspecified Development files for dvblinkremote
The dvblinkremote-devel package contains libraries and header files for
developing applications that use libdvblinkremote.
dvblinkremote-devel 0.2.0 0.16.beta.fc30 134813 Unspecified Development files for dvblinkremote
The dvblinkremote-devel package contains libraries and header files for
developing applications that use libdvblinkremote.
dvblinkremote-libs 0.2.0 0.16.beta.fc30 431456 Unspecified Pure C++ DVBLink Remote API library
libdvblinkremote is a pure C++ DVBLink Remote API static library. It currently
supports DVBLink Remote API version 0.2.
dvblinkremote-libs 0.2.0 0.16.beta.fc30 440236 Unspecified Pure C++ DVBLink Remote API library
libdvblinkremote is a pure C++ DVBLink Remote API static library. It currently
supports DVBLink Remote API version 0.2.
dvd+rw-tools 7.1 30.fc30 453071 Unspecified Toolchain to master DVD+RW/+R media
Collection of tools to master DVD+RW/+R media. For further
information see http://fy.chalmers.se/~appro/linux/DVD+RW/.
dvdauthor 0.7.2 7.fc30 715476 Unspecified Command line DVD authoring tool
DVDAuthor is a set of tools to help you author the file and directory
structure of a DVD-Video disc, including programmatic commands for
implementing interactive behavior. It is driven by command lines and
XML control files, though there are other programs that provide
GUI-based front ends if you prefer.
dvdbackup 0.4.2 12.fc30 227908 Unspecified Command line tool for ripping video DVDs
dvdbackup is a tool to rip video DVDs from the command line. It has
the advantages of being small, fast, and easy to use.
dvdisaster 0.79.5 7.fc30 5670632 Unspecified Additional error protection for CD/DVD media
dvdisaster provides a margin of safety against data loss on CD and DVD media
caused by scratches or aging. It creates error correction data,
which is used to recover unreadable sectors if the disc becomes damaged
at a later time.
dvgrab 3.5 23.20160616gite46042.fc30 448112 Unspecified Utility to capture video from a DV camera
The dvgrab utility will capture digital video from a DV source on the firewire
(IEEE-1394) bus.
dvtm 0.15 8.fc30 103494 Unspecified Tiling window management for the console
dvtm brings the concept of tiling window management, popularized by
X11-window managers like dwm to the console. As a console window
manager it tries to make it easy to work with multiple console based
programs like vim, mutt, cmus or irssi.
dwarves 1.12 1.fc30 300881 Development/Tools Debugging Information Manipulation Tools (pahole & friends)
dwarves is a set of tools that use the debugging information inserted in
ELF binaries by compilers such as GCC, used by well known debuggers such as
GDB, and more recent ones such as systemtap.
Utilities in the dwarves suite include pahole, that can be used to find
alignment holes in structs and classes in languages such as C, C++, but not
limited to these.
It also extracts other information such as CPU cacheline alignment, helping
pack those structures to achieve more cache hits.
These tools can also be used to encode the BTF type information format used with
the Linux kernel bpf syscall, using 'pahole -J'.
A diff like tool, codiff can be used to compare the effects changes in source
code generate on the resulting binaries.
Another tool is pfunct, that can be used to find all sorts of information about
functions, inlines, decisions made by the compiler about inlining, etc.
dwdiff 2.0.9 20.fc30 215876 Unspecified Front end to diff for comparing on a per word basis
dwdiff is a front-end for the diff program that operates at the word level
instead of the line level. It is different from wdiff in that it allows the
user to specify what should be considered whitespace, and in that it takes an
optional list of characters that should be considered delimiters. Delimiters
are single characters that are treated as if they are words, even when there
is no whitespace separating them from preceding words or delimiters.
dwgrep 0.4 2.fc30 155763 Unspecified A tool for querying Dwarf (debuginfo) graphs
Dwgrep is a tool, an associated language (called Zwerg) and a library
(libzwerg) for querying Dwarf (debuginfo) graphs.
You can think of dwgrep expressions as instructions describing a path
through a graph, with assertions about the type of nodes along the
way: that a node is of given type, that it has a given attribute,
etc. There are also means of expressing sub-conditions,
i.e. assertions that a given node is acceptable if a separate
expression matches (or does not match) a different path through the
graph.
dwgrep-doc 0.4 2.fc30 1366572 Unspecified HTML documentation for dwgrep and libzwerg
This package contains dwgrep-related documentation in the HTML
format. The documentation provides the same content as that on the
Boost web page (http://pmachata.github.io/dwgrep/).
dwlocstat 0.1 0.17.20121105gitc55cb50.fc30 176708 Unspecified Tool for examining Dwarf location info coverage
dwlocstat is a tool for examining Dwarf location info coverage. It
goes through DIEs of given binary's debug info that represent
variables and function parameters. For each such DIE, it computes
coverage of that DIE's range by location expressions.
dwscan 0.2 17.fc29 12963 Applications/Internet Displays access point information
Dwscan displays access point information in a useful manner.
dwz 0.12 10.fc30 236287 Unspecified DWARF optimization and duplicate removal tool
The dwz package contains a program that attempts to optimize DWARF
debugging information contained in ELF shared libraries and ELF executables
for size, by replacing DWARF information representation with equivalent
smaller representation where possible and by reducing the amount of
duplication using techniques from DWARF standard appendix E - creating
DW_TAG_partial_unit compilation units (CUs) for duplicated information
and using DW_TAG_imported_unit to import it into each CU that needs it.
dx 4.4.4 48.fc30 29935416 Unspecified Open source version of IBM's Visualization Data Explorer
OpenDX is a uniquely powerful, full-featured software package for the
visualization of scientific, engineering and analytical data: Its open
system design is built on familiar standard interface environments. And its
sophisticated data model provides users with great flexibility in creating
visualizations.
dx-devel 4.4.4 48.fc30 289884 Unspecified OpenDX module development headers and libraries
If you want to write a module to use in the Data Explorer Visual Program
Editor, or in the scripting language, you will need this package.
dx-devel 4.4.4 48.fc30 289839 Unspecified OpenDX module development headers and libraries
If you want to write a module to use in the Data Explorer Visual Program
Editor, or in the scripting language, you will need this package.
dx-libs 4.4.4 48.fc30 13588404 Unspecified OpenDX shared libraries
This package contains the shared libraries from OpenDX.
dx-libs 4.4.4 48.fc30 12400400 Unspecified OpenDX shared libraries
This package contains the shared libraries from OpenDX.
dxcc 20080225 33.fc30 159931 Unspecified Small utility which determines the ARRL DXCC entity of a ham radio callsign
dxcc is a small utility which determines the ARRL DXCC entity of a ham radio
callsign, based on the cty.dat country file by Jim Reisert, AD1C.
Optional GUI with a world map showing the DXCC's location available.
dxcc-gui 20080225 33.fc30 19131 Unspecified Optional GUI with a world map showing the DXCC's location
dxcc-gui is a small utility which determines the ARRL DXCC entity of a amateur
radio callsign, based on the cty.dat country file by Jim Reisert, AD1C.
dxf2gcode 20190103 3.fc30 2266758 Unspecified 2D drawings to CNC machine compatible G-Code converter
dxf2gcode is a tool for converting 2D (DXF, PDF, PS) drawings to CNC machine
compatible GCode. It has the following features:
- Integration in EMC2,
- Fully adjustable Postprocessor,
- G0 moves reduction by route optimization,
- Import of DXF and PDF,
- Improved accuracy for splines import by Line and Arc's,
- Mill parameter specification by layers,
- Drag knife and lathe support,
- Breaks a.k.a Tabs support,
- AutoCAD Blocks and Inserts,
- Multiple tools,
- Multiple language support: English, German, French, Russian,
- 3D viewer.
dxpc 3.9.2 15.fc30 261934 Unspecified A Differential X Protocol Compressor
dxpc is an X protocol compressor designed to improve the
speed of X11 applications run over low-bandwidth links
(such as dialup PPP connections or ADSL).
dymo-cups-drivers 1.4.0.5 6.fc30 1614169 Unspecified DYMO LabelWriter Drivers for CUPS
DYMO LabelWriter and DYMO LabelMANAGER series drivers for CUPS
dynafed 1.4.0 3.fc30 4237639 Unspecified Ultra-scalable dynamic system for federating HTTP-based storage resources
The Dynafed project provides a dynamic, scalable HTTP resource
federation mechanism for distributed storage systems.
It supports backends exposing HTTP, WebDAV, S3, Azure as
access protocols. In the S3 and Azure case it hides the secret
keys and exploits pre-signed URLs.
The default deployment style is accessible by any HTTP/Webdav
compatible client. The core components can be used to design
frontends based on other protocols.
dynafed 1.4.0 3.fc30 4272219 Unspecified Ultra-scalable dynamic system for federating HTTP-based storage resources
The Dynafed project provides a dynamic, scalable HTTP resource
federation mechanism for distributed storage systems.
It supports backends exposing HTTP, WebDAV, S3, Azure as
access protocols. In the S3 and Azure case it hides the secret
keys and exploits pre-signed URLs.
The default deployment style is accessible by any HTTP/Webdav
compatible client. The core components can be used to design
frontends based on other protocols.
dynafed-dmlite-frontend 1.4.0 3.fc30 5308477 Unspecified dmlite plugin for dynafed
Webdav frontend for dynafed using dmlite and lcgdm-dav
dynafed-dmlite-plugin 1.4.0 3.fc30 232890 Unspecified dmlite plugin for dynafed
Plugin for using dmlite for dynafed
dynafed-http-plugin 1.4.0 3.fc30 1567848 Unspecified Http and WebDav plugin for dynafed
Plugin for the WebDav based storage system for dynafed
dynafed-lfc-plugin 1.4.0 3.fc30 227944 Unspecified Logical File catalog (LFC) plugin for dynafed
Plugin for the Logical File catalog system for dynafed
dynafed-private-devel 1.4.0 3.fc30 12571 Unspecified Development files for dynafed
Headers files for dynafed's plugin development.
dynafed-private-devel 1.4.0 3.fc30 12573 Unspecified Development files for dynafed
Headers files for dynafed's plugin development.
dynafed-tpc-gfal2 1.4.0 3.fc30 2625 Unspecified Third party copy (TPC) scripts using gfal2 for dynafed
Scripts that implement the cross-protocol third party copy (TPC) using gfal2
dynalink 0.7 13.fc30 154997 Unspecified Dynamic Linker Framework for Languages on the JVM
Dynalink is an invoke-dynamic-based high-level linking and
meta-object protocol library. It enables creation of
languages on the JVM that can easily inter-operate with
plain Java objects and each other.
dynalink-javadoc 0.7 13.fc30 1410222 Unspecified Javadoc for dynalink
This package contains javadoc for dynalink.
dynamic-edt-3d 1.8.1 6.fc30 93929 Unspecified Dynamic Euclidian Distance Transform Implementation
The dynamicEDT3D library implements an incrementally updatable Euclidean
distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap
3D representation and hooks into the change detection of the OctoMap library
to propagate changes to the EDT.
dynamic-edt-3d 1.8.1 6.fc30 99037 Unspecified Dynamic Euclidian Distance Transform Implementation
The dynamicEDT3D library implements an incrementally updatable Euclidean
distance transform (EDT) in 3D. It comes with a wrapper to use the OctoMap
3D representation and hooks into the change detection of the OctoMap library
to propagate changes to the EDT.
dynamic-edt-3d-devel 1.8.1 6.fc30 21786 Unspecified Development files and libraries for dynamic-edt-3d
This package contains the header files and development libraries
for dynamic-edt-3d. If you like to develop programs using dynamic-edt-3d,
you will need to install dynamic-edt-3d-devel.
dynamic-edt-3d-devel 1.8.1 6.fc30 21790 Unspecified Development files and libraries for dynamic-edt-3d
This package contains the header files and development libraries
for dynamic-edt-3d. If you like to develop programs using dynamic-edt-3d,
you will need to install dynamic-edt-3d-devel.
dynamite 0.1.1 19.fc30 35288 Unspecified Extract data compressed with PKWARE Data Compression Library
Extract data compressed with PKWARE Data Compression Library
dynamite 0.1.1 19.fc30 36948 Unspecified Extract data compressed with PKWARE Data Compression Library
Extract data compressed with PKWARE Data Compression Library
dynamite-devel 0.1.1 19.fc30 1008 Unspecified Files needed for software development with dynamite
The dynamite-devel package contains the files needed for development with
dynamite
dynamite-devel 0.1.1 19.fc30 1010 Unspecified Files needed for software development with dynamite
The dynamite-devel package contains the files needed for development with
dynamite
dyninst 10.0.0 7.fc30 18143695 Unspecified An API for Run-time Code Generation
Dyninst is an Application Program Interface (API) to permit the insertion of
code into a running program. The API also permits changing or removing
subroutine calls from the application program. Run-time code changes are
useful to support a variety of applications including debugging, performance
monitoring, and to support composing applications out of existing packages.
The goal of this API is to provide a machine independent interface to permit
the creation of tools and applications that use run-time code patching.
dyninst 10.0.0 7.fc30 18524949 Unspecified An API for Run-time Code Generation
Dyninst is an Application Program Interface (API) to permit the insertion of
code into a running program. The API also permits changing or removing
subroutine calls from the application program. Run-time code changes are
useful to support a variety of applications including debugging, performance
monitoring, and to support composing applications out of existing packages.
The goal of this API is to provide a machine independent interface to permit
the creation of tools and applications that use run-time code patching.
dyninst-devel 10.0.0 7.fc30 1414160 Unspecified Header files for the compiling programs with Dyninst
dyninst-devel includes the C header files that specify the Dyninst user-space
libraries and interfaces. This is required for rebuilding any program
that uses Dyninst.
dyninst-devel 10.0.0 7.fc30 1415360 Unspecified Header files for the compiling programs with Dyninst
dyninst-devel includes the C header files that specify the Dyninst user-space
libraries and interfaces. This is required for rebuilding any program
that uses Dyninst.
dyninst-doc 10.0.0 7.fc30 3466723 Unspecified Documentation for using the Dyninst API
dyninst-doc contains API documentation for the Dyninst libraries.
dyninst-static 10.0.0 7.fc30 57958908 Unspecified Static libraries for the compiling programs with Dyninst
dyninst-static includes the static versions of the library files for
the dyninst user-space libraries and interfaces.
dyninst-static 10.0.0 7.fc30 72268084 Unspecified Static libraries for the compiling programs with Dyninst
dyninst-static includes the static versions of the library files for
the dyninst user-space libraries and interfaces.
dyninst-testsuite 10.0.0 7.fc30 322092910 Unspecified Programs for testing Dyninst
dyninst-testsuite includes the test harness and target programs for
making sure that dyninst works properly.
dzen2 0.8.5 23.20100104svn.fc30 212566 Unspecified A general purpose messaging and notification program
Dzen is a general purpose messaging, notification and menuing program for X11.
It was designed to be scriptable in any language and integrate well with window
managers like dwm, wmii and xmonad, though it will work with any windowmanger.