/*
 * DANG_BEGIN_MODULE
 *
 * REMARK
 * Here's all the calls to the code to try and properly save & restore
 * the video state between VC's and the attempts to control updates to
 * the VC whilst the user is using another. We map between the real
 * screen address and that used by DOSEMU here too.
 *
 * Attempts to use a cards own bios require the addition of the parameter
 * "graphics" to the video statement in "/etc/dosemu.conf". This will make
 * the emulator try to execute the card's initialization routine which is
 * normally located at address c000:0003. This can now be changed as an
 * option.
 * /REMARK
 *
 * DANG_END_MODULE
 *
 * vc.c - for the Linux DOS emulator
 *  Robert Sanders, gt8134b@prism.gatech.edu
 *
 */

#include <stdio.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <stdlib.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <ctype.h>
#include <termios.h>			/* needed for mouse.h */
#include <sys/time.h>
#include <signal.h>
#include <sys/stat.h>
#ifdef __linux__
#include <sys/vt.h>
#include <sys/kd.h>
#endif

#define INIT_C2TRAP

#include "emu.h"
#include "memory.h"
#include "mouse.h"
#include "bios.h"
#include "port.h"
#include "coopth.h"
#include "video.h"
#include "vc.h"
#include "vga.h"
#include "priv.h"
#include "mapping.h"
#include "timers.h"
#include "vgaemu.h"
#include "dpmi.h"
#include "sig.h"

static void set_dos_video (void);
static void get_video_ram (int waitflag);
static void put_video_ram (void);
static int release_perm (void);

static void SIGRELEASE_call (void *);
static void SIGACQUIRE_call (void *);
static int in_vc_call;
static int vc_tid;
static int vcr_tid;
static int color_text;
int CRT_I, CRT_D, IS1_R, FCR_W;
u_char permissions;
struct screen_stat scr_state;
struct video_save_struct linux_regs, dosemu_regs;
static unsigned virt_text_base;
static int phys_text_base;

#define MAXDOSINTS 032
#define MAXMODES 34


static void
forbid_switch (void)
{
  scr_state.vt_allow = 0;
}

void
allow_switch (void)
{
  scr_state.vt_allow = 1;
}

static void __SIGACQUIRE_call(void *arg)
{
  get_video_ram (WAIT);
  set_dos_video ();
  /*      if (config.vga) dos_unpause(); */
  unfreeze_mouse();
}

static void vc_switch_done(int tid)
{
  in_vc_call--;
}

static void SIGACQUIRE_call(void *arg)
{
  int logged = 0;
  unfreeze_dosemu();
  while (in_vc_call) {
    if (!logged) {
      v_printf("VID: Cannot acquire console, waiting\n");
      logged = 1;
    }
    coopth_yield();
  }
  in_vc_call++;
  coopth_start(vc_tid, NULL);
}

int dos_has_vt = 1;

static void acquire_vt(sigcontext_t *scp, siginfo_t *si)
{
  dos_has_vt = 1;

  flush_log();

  v_printf ("VID: Acquiring VC\n");
  forbid_switch ();
  if (ioctl (console_fd, VT_RELDISP, VT_ACKACQ))	/* switch acknowledged */
    v_printf ("VT_RELDISP failed (or was queued)!\n");
  allow_switch ();
  SIGNAL_save (SIGACQUIRE_call, NULL, 0, __func__);
  scr_state.current = 1;
}

static void
set_dos_video (void)
{
  if (!config.vga)
    return;

  /* jesx */
  /* After all that fun up there, get permissions and save/restore states */
  if (video_initialized)
    {
      v_printf ("Acquiring vt, restoring dosemu_regs\n");
      get_perm ();
      restore_vga_state (&dosemu_regs);
    }

}

static void set_linux_video (void)
{
  if (!config.vga)
    return;

  /* jesx */
  /* After all that fun  rel perms and save/restore states */
  if (video_initialized)
    {
      v_printf ("Storing dosemu_regs, Releasing vt mode=%02x\n", READ_BYTE(0x449));
      dosemu_regs.video_mode = READ_BYTE(0x449);
      save_vga_state (&dosemu_regs);
      if (linux_regs.mem != NULL)
	{
	  v_printf ("Restoring linux_regs, Releasing vt\n");
	  restore_vga_state (&linux_regs);
	}
    }
}

static void post_release(void *arg)
{
  /* NOTE: if DOSEMU is not frozen then a DOS program in the background
  is capable of changing the screen appearance, even while in another
  console or X */
  freeze_dosemu();
}

static void __SIGRELEASE_call(void *arg)
{
  if (scr_state.current == 1)
    {
      v_printf ("VID: Releasing VC\n");
      freeze_mouse();
      if (!scr_state.vt_allow)
	{
	  v_printf ("disallowed vt switch!\n");
	  return;
	}

      set_linux_video ();
      if (can_do_root_stuff)
	release_perm ();
      put_video_ram ();

      /*      if (config.vga) dos_pause(); */
      scr_state.current = 0;
      coopth_add_post_handler(post_release, NULL);
    }

  scr_state.current = 0;	/* our console is no longer current */
  if (ioctl (console_fd, VT_RELDISP, 1))	/* switch ok by me */
    v_printf ("VT_RELDISP failed!\n");
  else {
   /* we don't want any debug activity while VC is not active */
    flush_log();
  }
}

static void SIGRELEASE_call(void *arg)
{
  int logged = 0;
  while (in_vc_call) {
    if (!logged) {
      v_printf("VID: Cannot release console, waiting\n");
      logged = 1;
    }
    /* Thread resources are limited. The below yield() can overflow
     * coopth queue if the console thread stuck */
#if 0
    coopth_yield();
#else
    return;
#endif
  }
  in_vc_call++;
  coopth_start(vcr_tid, NULL);
}

static int wait_vc_active (void)
{
  if (ioctl (console_fd, VT_WAITACTIVE, scr_state.console_no) < 0)
    {
      if (errno != EINTR)
		{
			error("VT_WAITACTIVE for %d gave %d: %s\n", scr_state.console_no,
			     errno, strerror (errno));
	    }
      return -1;
    }
  else
    return 0;
}

static void wait_for_active_vc(void)
{
#if 0
  config.console_video = 0;
#endif
  v_printf ("VID: get_video_ram WAITING\n");
  /* XXX - wait until our console is current (mixed signal functions) */
  do {
    if (!wait_vc_active ())
      break;
    v_printf ("Keeps waiting...And\n");
  } while (errno == EINTR);
}

static void release_vt(sigcontext_t *scp, siginfo_t *si)
{
  dos_has_vt = 0;

  SIGNAL_save (SIGRELEASE_call, NULL, 0, __func__);
}

void init_get_video_ram(int waitflag)
{
  off_t base = GRAPH_BASE;
  if (!config.vga) {
    base = phys_text_base;
  }
  if (waitflag == WAIT)
    wait_for_active_vc();
  scr_state.pageno = 0;
  scr_state.virt_address = virt_text_base;
  scr_state.phys_address = base;
  scr_state.mapped = 1;
  /* mapping is done later in map_hardware_ram */
}

/* allows remapping even if memory is mapped in...this is useful, as it
 * remembers where the video mem *was* mapped, unmaps from that, and then
 * remaps it to where the text page number says it should be
 */
static void get_video_ram (int waitflag)
{
  v_printf ("get_video_ram STARTED\n");
  if (waitflag == WAIT)
    wait_for_active_vc();
  scr_state.mapped = 1;
}

static void put_video_ram (void)
{
  scr_state.mapped = 0;
  v_printf ("put_video_ram completed\n");
}

static void tempsigvt(int sig)
{
  /* temporary signal handler between set_process_control and final setting
     of signals in signal_init() */
  if (sig == SIG_RELEASE)
    release_vt(NULL, NULL);
  else
    acquire_vt(NULL, NULL);
}

/* this puts the VC under process control */
void
set_process_control (void)
{
  struct vt_mode vt_mode;
  sigset_t set;
  struct sigaction sa;

  vt_mode.mode = VT_PROCESS;
  vt_mode.waitv = 0;
  vt_mode.relsig = SIG_RELEASE;
  vt_mode.acqsig = SIG_ACQUIRE;
  vt_mode.frsig = 0;

  allow_switch ();

  registersig (SIG_RELEASE, release_vt);
  registersig (SIG_ACQUIRE, acquire_vt);

  sigemptyset(&set);
  sigaddset(&set, SIG_RELEASE);
  sigaddset(&set, SIG_ACQUIRE);

  /* set signal handlers here already in case consoles are switched
     very quickly */
  sa.sa_flags = SA_RESTART;
  sa.sa_mask = set;
  sa.sa_handler = tempsigvt;
  sigaction(SIG_RELEASE, &sa, NULL);
  sigaction(SIG_ACQUIRE, &sa, NULL);
  sigprocmask(SIG_UNBLOCK, &set, NULL);

  if (ioctl (console_fd, VT_SETMODE, &vt_mode))
    v_printf ("initial VT_SETMODE failed!\n");
  v_printf ("VID: Set process control\n");
}

static void
clear_process_control (void)
{
  struct vt_mode vt_mode;

  vt_mode.mode = VT_AUTO;
  ioctl (console_fd, VT_SETMODE, &vt_mode);
}


void clear_console_video(void)
{
  v_printf("VID: video_close():clear console video\n");
  if (scr_state.current) {
    set_linux_video();
    release_perm();
    put_video_ram();		/* unmap the screen */
  }

  k_printf("KBD: Release mouse control\n");
  ioctl(console_fd, KDSETMODE, KD_TEXT);
  clear_process_control();
}

int
vc_active (void)
{				/* return 1 if our VC is active */
#ifdef __linux__
  struct vt_stat vtstat;

  g_printf ("VC_ACTIVE!\n");
  ioctl (console_fd, VT_GETSTATE, &vtstat);
  g_printf ("VC_ACTIVE: ours: %d, active: %d\n", scr_state.console_no, vtstat.v_active);
  return ((vtstat.v_active == scr_state.console_no));
#endif

}

void set_vc_screen_page (void)
{
  /* okay, if we have the current console, and video ram is mapped.
   * this has to be "atomic," or there is a "race condition": the
   * user may change consoles between our check and our remapping
   */
  forbid_switch ();
  if (scr_state.mapped)		/* should I check for foreground VC instead? */
    get_video_ram (WAIT);
  allow_switch ();
}


/* get ioperms to allow havoc to occur */
int
get_perm (void)
{
  if (permissions > 0)
    {
      return 0;
    }
  permissions++;
  if (config.vga)
    {				/* hope this will not lead to problems with ega/cga */
      /* get I/O permissions for VGA registers */
      if (set_ioperm (0x3b0, 0x3df - 0x3b0 + 1, 1))
	{
	  v_printf ("VGA: can't get I/O permissions \n");
	  exit (-1);
	}
      /* color or monochrome text emulation? */
      color_text = port_in (MIS_R) & 0x01;

      /* chose registers for color/monochrome emulation */
      if (color_text)
	{
	  CRT_I = CRT_IC;
	  CRT_D = CRT_DC;
	  IS1_R = IS1_RC;
	  FCR_W = FCR_WC;
	}
      else
	{
	  CRT_I = CRT_IM;
	  CRT_D = CRT_DM;
	  IS1_R = IS1_RM;
	  FCR_W = FCR_WM;
	}
    }
  else if (config.console_video && (config.cardtype == CARD_MDA))
    {
      if (set_ioperm (0x3b4, 1, 1) ||
	  set_ioperm (0x3b5, 1, 1) ||
	  set_ioperm (0x3b8, 1, 1) ||
	  set_ioperm (0x3ba, 1, 1) ||
	  set_ioperm (0x3bf, 1, 1))
	{
	  v_printf ("HGC: can't get I/O permissions \n");
	  exit (-1);
	}
    }
  v_printf ("Permission allowed\n");
  return 0;
}

/* Stop io to card */
static int release_perm (void)
{
  if (permissions > 0)
    {
      permissions--;
      if (permissions > 0)
	{
	  return 0;
	}
      if (config.vga)
	{			/* hope this will not lead to problems with ega/cga */
	  /* get I/O permissions for VGA registers */
	  /* release I/O permissions for VGA registers */
	  if (set_ioperm (0x3b0, 0x3df - 0x3b0 + 1, 0))
	    {
	      v_printf ("VGA: can't release I/O permissions \n");
	      leavedos (-1);
	    }
	}
      else if (config.console_video && (config.cardtype == CARD_MDA))
	{
	  if (set_ioperm (0x3b4, 1, 0) ||
	      set_ioperm (0x3b5, 1, 0) ||
	      set_ioperm (0x3b8, 1, 0) ||
	      set_ioperm (0x3ba, 1, 0) ||
	      set_ioperm (0x3bf, 1, 0))
	    {
	      v_printf ("HGC: can't release I/O permissions \n");
	      exit (-1);
	    }
	}
      v_printf ("Permission disallowed\n");
    }
  else
    v_printf ("Permissions already at 0\n");
  return 0;

}

int
set_regs (u_char regs[], int seq_gfx_only)
{
  int i;

  emu_video_retrace_off();
  /* port_out(dosemu_regs.regs[FCR], FCR_W); */
  /* update misc output register */
  if (!seq_gfx_only)
    port_out (regs[MIS], MIS_W);

  /* write sequencer registers */
  /* synchronous reset on */
  port_out (0x00, SEQ_I);
  port_out (0x01, SEQ_D);
  port_out (0x01, SEQ_I);
  port_out (regs[SEQ + 1] | 0x20, SEQ_D);
  /* synchronous reset off */
  port_out (0x00, SEQ_I);
  port_out (0x03, SEQ_D);
  for (i = 2; i < SEQ_C; i++)
    {
      port_out (i, SEQ_I);
      port_out (regs[SEQ + i], SEQ_D);
    }

  if (!seq_gfx_only) {
    /* deprotect CRT registers 0-7 */
    port_out (0x11, CRT_I);
    port_out (port_in (CRT_D) & 0x7F, CRT_D);

    /* write CRT registers */
    for (i = 0; i < CRT_C; i++)
      {
	port_out (i, CRT_I);
	port_out (regs[CRT + i], CRT_D);
      }
  }

  /* write graphics controller registers */
  for (i = 0; i < GRA_C; i++)
    {
      port_out (i, GRA_I);
      port_out (regs[GRA + i], GRA_D);
    }

  /* write attribute controller registers */
  if (!seq_gfx_only) for (i = 0; i < ATT_C; i++)
    {
      port_in (IS1_R);		/* reset flip-flop */
      port_out (i, ATT_IW);
      port_out (regs[ATT + i], ATT_IW);
    }

  /* port_out(dosemu_regs.regs[CRTI], CRT_I);
port_out(dosemu_regs.regs[GRAI], GRA_I);
port_out(dosemu_regs.regs[SEQI], SEQ_I); */
  /* v_printf("CRTI=0x%02x\n",dosemu_regs.regs[CRTI]);
v_printf("GRAI=0x%02x\n",dosemu_regs.regs[GRAI]);
v_printf("SEQI=0x%02x\n",dosemu_regs.regs[SEQI]); */
  emu_video_retrace_on();
  return (0);
}

#if 0
/* Reset Attribute registers */
static inline void
reset_att (void)
{
  emu_video_retrace_off();
  port_in (IS1_R);
  emu_video_retrace_on();
}
#endif

/* Attempt to virtualize calls to video ports */

u_char att_d_index = 0;
static int isr_read = 0;

u_char
video_port_in (ioport_t port)
{
  if (permissions)
    return port_real_inb (port);
  /* v_printf("Video read on port 0x%04x.\n",port); */
  switch (port)
    {
    case CRT_IC:
    case CRT_IM:
      v_printf ("Read Index CRTC 0x%02x\n", dosemu_regs.regs[CRTI]);
      return (dosemu_regs.regs[CRTI]);
    case CRT_DC:
    case CRT_DM:
      if (dosemu_regs.regs[CRTI] < CRT_C)
	{
	  v_printf ("Read Data at CRTC Index 0x%02x = 0x%02x \n", dosemu_regs.regs[CRTI], dosemu_regs.regs[CRT + dosemu_regs.regs[CRTI]]);
	  return (dosemu_regs.regs[CRT + dosemu_regs.regs[CRTI]]);
	}
      else
	return (ext_video_port_in (port));
      break;
    case GRA_I:
      v_printf ("Read Index GRAI 0x%02x\n", GRAI);
      return (dosemu_regs.regs[GRAI]);
    case GRA_D:
      if (dosemu_regs.regs[GRAI] < GRA_C)
	{
	  v_printf ("Read Data at GRA  Index 0x%02x = 0x%02x \n", dosemu_regs.regs[GRAI], dosemu_regs.regs[GRA + dosemu_regs.regs[GRAI]]);
	  return (dosemu_regs.regs[GRA + dosemu_regs.regs[GRAI]]);
	}
      else
	return (ext_video_port_in (port));
      break;
    case SEQ_I:
      v_printf ("Read Index SEQI 0x%02x\n", SEQI);
      return (dosemu_regs.regs[SEQI]);
    case SEQ_D:
      if (dosemu_regs.regs[SEQI] < SEQ_C)
	{
	  v_printf ("Read Data at SEQ Index 0x%02x = 0x%02x \n", dosemu_regs.regs[SEQI], dosemu_regs.regs[SEQ + dosemu_regs.regs[SEQI]]);
	  return (dosemu_regs.regs[SEQ + dosemu_regs.regs[SEQI]]);
	}
      else
	return (ext_video_port_in (port));
      break;
    case ATT_IW:
      v_printf ("Read Index ATTIW 0x%02x\n", att_d_index);
      return (att_d_index);
    case ATT_R:
      if (att_d_index > 20)
	return (ext_video_port_in (port));
      else
	{
	  v_printf ("Read Index ATTR 0x%02x\n", dosemu_regs.regs[ATT + att_d_index]);
	  return (dosemu_regs.regs[ATT + att_d_index]);
	}
      break;
    case IS1_RC:
    case IS1_RM:
      v_printf ("Read ISR1_R 0x%02x\n", dosemu_regs.regs[ISR1]);
      isr_read = 1;		/* Next ATT write will be to the index */
      return (dosemu_regs.regs[ISR1]);
    case MIS_R:
      v_printf ("Read MIS_R 0x%02x\n", dosemu_regs.regs[MIS]);
      return (dosemu_regs.regs[MIS]);
    case IS0_R:
      v_printf ("Read ISR0_R 0x%02x\n", dosemu_regs.regs[ISR0]);
      return (dosemu_regs.regs[ISR0]);
    case PEL_IW:
      v_printf ("Read PELIW 0x%02x\n", dosemu_regs.regs[PELIW] / 3);
      return (dosemu_regs.regs[PELIW] / 3);
    case PEL_IR:
      v_printf ("Read PELIR 0x%02x\n", dosemu_regs.regs[PELIR] / 3);
      return (dosemu_regs.regs[PELIR] / 3);
    case PEL_D:
      v_printf ("Read PELIR Data 0x%02x\n", dosemu_regs.pal[dosemu_regs.regs[PELIR]]);
      return (dosemu_regs.pal[dosemu_regs.regs[PELIR]++]);
    case PEL_M:
      v_printf ("Read PELM  Data 0x%02x\n", dosemu_regs.regs[PELM] == 0 ? 0xff : dosemu_regs.regs[PELM]);
      return (dosemu_regs.regs[PELM] == 0 ? 0xff : dosemu_regs.regs[PELM]);
    default:
      return (ext_video_port_in (port));
    }
}

void
video_port_out (ioport_t port, u_char value)
{
  if (permissions) {
    port_real_outb (port, value);
    return;
  }
  /* v_printf("Video write on port 0x%04x,byte 0x%04x.\n",port, value); */
  switch (port)
    {
    case CRT_IC:
    case CRT_IM:
      v_printf ("Set Index CRTC 0x%02x\n", value);
      dosemu_regs.regs[CRTI] = value;
      break;
    case CRT_DC:
    case CRT_DM:
      if (dosemu_regs.regs[CRTI] < CRT_C)
	{
	  v_printf ("Write Data at CRTC Index 0x%02x = 0x%02x \n", dosemu_regs.regs[CRTI], value);
	  dosemu_regs.regs[CRT + dosemu_regs.regs[CRTI]] = value;
	}
      else
	ext_video_port_out (port, value);
      break;
    case GRA_I:
      v_printf ("Set Index GRAI 0x%02x\n", value);
      dosemu_regs.regs[GRAI] = value;
      break;
    case GRA_D:
      if (dosemu_regs.regs[GRAI] < GRA_C)
	{
	  v_printf ("Write Data at GRAI Index 0x%02x = 0x%02x \n", dosemu_regs.regs[GRAI], value);
	  dosemu_regs.regs[GRA + dosemu_regs.regs[GRAI]] = value;
	}
      else
	ext_video_port_out (port, value);
      break;
    case SEQ_I:
      v_printf ("Set Index SEQI 0x%02x\n", value);
      dosemu_regs.regs[SEQI] = value;
      break;
    case SEQ_D:
      if (dosemu_regs.regs[SEQI] < SEQ_C)
	{
	  v_printf ("Write Data at SEQ Index 0x%02x = 0x%02x \n", dosemu_regs.regs[SEQI], value);
	  dosemu_regs.regs[SEQ + dosemu_regs.regs[SEQI]] = value;
	}
      else
	ext_video_port_out (port, value);
      break;
    case ATT_IW:
      if (isr_read)
	{
	  v_printf ("Set Index ATTI 0x%02x\n", value & 0x1f);
	  att_d_index = value & 0x1f;
	  isr_read = 0;
	}
      else
	{
	  isr_read = 1;
	  if (att_d_index > 20)
	    ext_video_port_out (port, value);
	  else
	    {
	      v_printf ("Write Data at ATT Index 0x%02x = 0x%02x \n", att_d_index, value);
	      dosemu_regs.regs[ATT + att_d_index] = value;
	    }
	}
      break;
    case MIS_W:
      v_printf ("Set MISW 0x%02x\n", value);
      dosemu_regs.regs[MIS] = value;
      break;
    case PEL_IW:
      v_printf ("Set PELIW  to 0x%02x\n", value);
      dosemu_regs.regs[PELIW] = value * 3;
      break;
    case PEL_IR:
      v_printf ("Set PELIR to 0x%02x\n", value);
      dosemu_regs.regs[PELIR] = value * 3;
      break;
    case PEL_D:
      v_printf ("Put PEL_D[0x%02x] = 0x%02x\n", dosemu_regs.regs[PELIW], value);
      dosemu_regs.pal[dosemu_regs.regs[PELIW]] = value;
      dosemu_regs.regs[PELIW] += 1;
      break;
    case PEL_M:
      v_printf ("Set PEL_M to 0x%02x\n", value);
      dosemu_regs.regs[PELM] = value;
      break;
    case GR1_P:
      v_printf ("Set GR1_P to 0x%02x\n", value);
      dosemu_regs.regs[GR1P] = value;
      break;
    case GR2_P:
      v_printf ("Set GR2_P to 0x%02x\n", value);
      dosemu_regs.regs[GR2P] = value;
      break;
    default:
      ext_video_port_out (port, value);
    }
  return;
}

static void scr_state_init(void)
{
  struct stat chkbuf;
  int major, minor;
  scr_state.vt_allow = 0;
  scr_state.mapped = 0;
  scr_state.pageno = 0;
  scr_state.virt_address = virt_text_base;
  /* Assume the screen is initially mapped. */
  scr_state.current = 1;

  if (fstat(STDIN_FILENO, &chkbuf) != 0)
	return;

  major = chkbuf.st_rdev >> 8;
  minor = chkbuf.st_rdev & 0xff;

  c_printf("major = %d minor = %d\n",
	    major, minor);
  /* console major num is 4, minor 64 is the first serial line */
  if (S_ISCHR(chkbuf.st_mode) && (major == 4) && (minor < 64))
       scr_state.console_no = minor;
}

void vc_init(void)
{
  scr_state_init();

  switch (config.cardtype) {
  case CARD_MDA:
    {
      phys_text_base = MDA_PHYS_TEXT_BASE;
      virt_text_base = MDA_VIRT_TEXT_BASE;
      break;
    }
  case CARD_CGA:
    {
      phys_text_base = CGA_PHYS_TEXT_BASE;
      virt_text_base = CGA_VIRT_TEXT_BASE;
      break;
    }
  case CARD_EGA:
    {
      phys_text_base = EGA_PHYS_TEXT_BASE;
      virt_text_base = EGA_VIRT_TEXT_BASE;
      break;
    }
  case CARD_VGA:
    {
      phys_text_base = VGA_PHYS_TEXT_BASE;
      virt_text_base = VGA_VIRT_TEXT_BASE;
      break;
    }
  default:			/* or Terminal, is this correct ? */
    {
      phys_text_base = CGA_PHYS_TEXT_BASE;
      virt_text_base = CGA_VIRT_TEXT_BASE;
      break;
    }
  }
}

void vc_post_init(void)
{
  /* vc switching may need sleeping (while copying video mem,
   * see store_vga_mem()), but the sighandling thread should not sleep.
   * So we need a separate coopthread. */
  vc_tid = coopth_create("vc acquire", __SIGACQUIRE_call);
  vcr_tid = coopth_create("vc release", __SIGRELEASE_call);
  coopth_set_permanent_post_handler(vc_tid, vc_switch_done);
  coopth_set_permanent_post_handler(vcr_tid, vc_switch_done);
  /* we dont use detached thread here to avoid the DOS code
   * from running concurrently with video mem saving. Another
   * solution (simpler one) is to rely on freeze_dosemu() and
   * use the detached thread here. */
  coopth_set_ctx_handlers(vc_tid, sig_ctx_prepare, sig_ctx_restore);
  coopth_set_ctx_handlers(vcr_tid, sig_ctx_prepare, sig_ctx_restore);
}