# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# This file is part of Mailfromd.
# Copyright (C) 2005-2020 Sergey Poznyakoff
#
# Mailfromd is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.
#
# Mailfromd is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Mailfromd. If not, see .
# This file is part of Imprimatur.
# Copyright (C) 2006, 2007, 2010, 2011 Sergey Poznyakoff
#
# Imprimatur is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.
#
# Imprimatur is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Imprimatur. If not, see .
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/imprimatur/imprimatur.m4 \
$(top_srcdir)/am/aggr.m4 $(top_srcdir)/am/debug.m4 \
$(top_srcdir)/am/gcc.m4 $(top_srcdir)/am/ipv6.m4 \
$(top_srcdir)/am/proctitle.m4 $(top_srcdir)/m4/gettext.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/version.texi \
$(srcdir)/stamp-vti $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo " DVIPS " $@;
am__v_DVIPS_1 =
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
am__v_MAKEINFO_1 =
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo " INFOHTML" $@;
am__v_INFOHTML_1 =
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
am__v_TEXI2DVI_1 =
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
am__v_TEXI2PDF_1 =
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 =
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 =
INFO_DEPS = $(srcdir)/mailfromd.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = mailfromd.dvi
PDFS = mailfromd.pdf
PSS = mailfromd.ps
HTMLS = mailfromd.html
TEXINFOS = mailfromd.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(lispdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
lispLISP_INSTALL = $(INSTALL_DATA)
LISP = $(lisp_LISP)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__DIST_COMMON = $(mailfromd_TEXINFOS) \
$(srcdir)/../imprimatur/imprimatur.mk $(srcdir)/Makefile.in \
$(top_srcdir)/build-aux/mdate-sh \
$(top_srcdir)/build-aux/texinfo.tex
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOM4TE = @AUTOM4TE@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_SYSLOG_ASYNC = @BUILD_SYSLOG_ASYNC@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFAULT_DB_TYPE = @DEFAULT_DB_TYPE@
DEFAULT_DNS_NEGATIVE_EXPIRE_INTERVAL = @DEFAULT_DNS_NEGATIVE_EXPIRE_INTERVAL@
DEFAULT_EXPIRE_INTERVAL = @DEFAULT_EXPIRE_INTERVAL@
DEFAULT_EXPIRE_RATES_INTERVAL = @DEFAULT_EXPIRE_RATES_INTERVAL@
DEFAULT_LOG_FACILITY = @DEFAULT_LOG_FACILITY@
DEFAULT_PREPROCESSOR = @DEFAULT_PREPROCESSOR@
DEFAULT_SOCKET = @DEFAULT_SOCKET@
DEFAULT_STATE_DIR = @DEFAULT_STATE_DIR@
DEFAULT_SYSLOG_ASYNC = @DEFAULT_SYSLOG_ASYNC@
DEFAULT_USER = @DEFAULT_USER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSPAM_CFLAGS = @DSPAM_CFLAGS@
DSPAM_LIBS = @DSPAM_LIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMACS = @EMACS@
EMACSLOADPATH = @EMACSLOADPATH@
EXEEXT = @EXEEXT@
GEOIP_LIBS = @GEOIP_LIBS@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GREP = @GREP@
IMPRIMATUR_MAKEINFOFLAGS = @IMPRIMATUR_MAKEINFOFLAGS@
IMPRIMATUR_MODULE_DIR = @IMPRIMATUR_MODULE_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAILUTILS_BIN = @MAILUTILS_BIN@
MAILUTILS_CONFIG = @MAILUTILS_CONFIG@
MAILUTILS_INCLUDES = @MAILUTILS_INCLUDES@
MAILUTILS_LIBS = @MAILUTILS_LIBS@
MAILUTILS_VERSION = @MAILUTILS_VERSION@
MAKEINFO = @MAKEINFO@
META1_INCLUDES = @META1_INCLUDES@
META1_LIBS = @META1_LIBS@
MF_IPV6_SUPPORT = @MF_IPV6_SUPPORT@
MF_PROCTITLE_LIBS = @MF_PROCTITLE_LIBS@
MILTER = @MILTER@
MILTER_INCLUDES = @MILTER_INCLUDES@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NETTLE_LIBS = @NETTLE_LIBS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
PPBIN = @PPBIN@
PP_SETUP_FILE = @PP_SETUP_FILE@
PTHREAD_LIBRARIES = @PTHREAD_LIBRARIES@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
RENDITION = @RENDITION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
lisp_LISP = @lisp_LISP@
lispdir = @lispdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
info_TEXINFOS = mailfromd.texi
mailfromd_TEXINFOS = \
calloutd.texi\
fdl.texi\
functions.texi\
gacopyz.texi\
macros.texi\
mfdbtool.texi\
mtasim.texi\
pmult.texi\
sexp.texi\
strftime.texi\
upgrade.texi
EXTRA_DIST = \
gendocs_template\
gendocs.sh
AM_MAKEINFOFLAGS = -I $(abs_top_srcdir) @IMPRIMATUR_MAKEINFOFLAGS@
# Imprimatur setup
imprimatur_INPUT = $(info_TEXINFOS) $(mailfromd_TEXINFOS)
CHECK_DOCS = $(top_srcdir)/@IMPRIMATUR_MODULE_DIR@/check-docs.sh
GENDOCS = $(srcdir)/gendocs.sh --no-copy-images --html '--init-file=$(abs_srcdir)/html.init'
TEXI2DVI = texi2dvi -t '@set $(RENDITION)' -I $(abs_top_srcdir) -I $(top_srcdir)/imprimatur
all: all-am
.SUFFIXES:
.SUFFIXES: .dvi .el .elc .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/../imprimatur/imprimatur.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnits doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(srcdir)/../imprimatur/imprimatur.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
.texi.info:
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
$<
.texi.pdf:
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
$<
.texi.html:
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
$(srcdir)/mailfromd.info: mailfromd.texi $(srcdir)/version.texi $(mailfromd_TEXINFOS)
mailfromd.dvi: mailfromd.texi $(srcdir)/version.texi $(mailfromd_TEXINFOS)
mailfromd.pdf: mailfromd.texi $(srcdir)/version.texi $(mailfromd_TEXINFOS)
mailfromd.html: mailfromd.texi $(srcdir)/version.texi $(mailfromd_TEXINFOS)
$(srcdir)/version.texi: $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: mailfromd.texi $(top_srcdir)/configure
@(dir=.; test -f ./mailfromd.texi || dir=$(srcdir); \
set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/mailfromd.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
(cmp -s vti.tmp$$$$ $(srcdir)/version.texi \
|| (echo "Updating $(srcdir)/version.texi" && \
cp vti.tmp$$$$ $(srcdir)/version.texi.tmp$$$$ && \
mv $(srcdir)/version.texi.tmp$$$$ $(srcdir)/version.texi)) && \
rm -f vti.tmp$$$$ $(srcdir)/version.texi.$$$$
@cp $(srcdir)/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp* $(srcdir)/version.texi.tmp*
maintainer-clean-vti:
-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) $(AM_V_texinfo) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf mailfromd.t2d mailfromd.t2p
clean-aminfo:
-test -z "mailfromd.dvi mailfromd.pdf mailfromd.ps mailfromd.html" \
|| rm -rf mailfromd.dvi mailfromd.pdf mailfromd.ps mailfromd.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
.el.elc:
if test "$(EMACS)" != "no"; then \
am__dir=. am__subdir_includes=''; \
case $@ in */*) \
am__dir=`echo '$@' | sed 's,/[^/]*$$,,'`; \
am__subdir_includes="-L $$am__dir -L $(srcdir)/$$am__dir"; \
esac; \
test -d "$$am__dir" || $(MKDIR_P) "$$am__dir" || exit 1; \
$(EMACS) --batch \
$(AM_ELCFLAGS) $(ELCFLAGS) \
$$am__subdir_includes -L $(builddir) -L $(srcdir) \
--eval "(defun byte-compile-dest-file (f) \"$@\")" \
--eval "(unless (byte-compile-file \"$<\") (kill-emacs 1))"; \
else :; fi
install-lispLISP: $(lisp_LISP) $(ELCFILES)
@$(NORMAL_INSTALL)
@if test "$(EMACS)" != no && test -n "$(lispdir)"; then \
list='$(lisp_LISP)'; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(lispdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(lispdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
echo " $(lispLISP_INSTALL) '$$d$$p' '$(DESTDIR)$(lispdir)/$$f'"; \
$(lispLISP_INSTALL) "$$d$$p" "$(DESTDIR)$(lispdir)/$$f" || exit $$?; \
if test -f $${p}c; then \
echo " $(lispLISP_INSTALL) '$${p}c' '$(DESTDIR)$(lispdir)/$${f}c'"; \
$(lispLISP_INSTALL) "$${p}c" "$(DESTDIR)$(lispdir)/$${f}c" || exit $$?; \
else : ; fi; \
done; \
else : ; fi
uninstall-lispLISP:
@$(NORMAL_UNINSTALL)
@test "$(EMACS)" != no && test -n "$(lispdir)" || exit 0; \
list='$(lisp_LISP)'; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
files="$$files "`echo "$$files" | sed 's|$$|c|'`; \
dir='$(DESTDIR)$(lispdir)'; $(am__uninstall_files_from_dir)
clean-lisp:
-rm -f $(ELCFILES)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(LISP)
installdirs:
for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(lispdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-aminfo clean-generic clean-lisp clean-local \
mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-am
dvi-am: $(DVIS)
html: html-am
html-am: $(HTMLS)
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-info-am install-lispLISP
install-dvi: install-dvi-am
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
pdf: pdf-am
pdf-am: $(PDFS)
ps: ps-am
ps-am: $(PSS)
uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-lispLISP uninstall-pdf-am uninstall-ps-am
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-aminfo \
clean-generic clean-lisp clean-local cscopelist-am ctags \
ctags-am dist-info distclean distclean-generic distclean-tags \
distdir dvi dvi-am html html-am info info-am install \
install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-lispLISP \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti mostlyclean \
mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
pdf-am ps ps-am tags tags-am uninstall uninstall-am \
uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-lispLISP uninstall-pdf-am uninstall-ps-am
.PRECIOUS: Makefile
clean-local:
@rm -rf manual
imprimatur-format:
@if test -n "`cat $(imprimatur_INPUT) | tr -d -c '\t'`"; then \
echo "Sources contain tabs; run make imprimatur-untabify"; \
false; \
fi
imprimatur-refs:
@for file in $(imprimatur_INPUT); \
do \
grep -q '^@c imprimatur-ignore' $$file && continue; \
sed -e = $$file | \
sed -n 'N;/@FIXME-.*ref/{s/\(^[0-9][0-9]*\).*@FIXME-.*ref{\([^}]*\)}.*/'$$file':\1: \2/gp}'; \
done > $@-t; \
if [ -s $@-t ]; then \
echo "Unresolved cross-references:"; \
cat $@-t;\
rm $@-t; \
else \
rm -f $@-t; \
fi
imprimatur-fixmes:
@for file in $(imprimatur_INPUT); \
do \
grep -q '^@c imprimatur-ignore' $$file && continue; \
sed -e = $$file | \
sed -n 'N;/@FIXME{/{s/\(^[0-9][0-9]*\).*@FIXME{\([^}]*\).*/'$$file':\1: \2/gp}'; \
done > $@-t; \
if [ -s $@-t ]; then \
echo "Unresolved FIXMEs:"; \
cat $@-t; \
rm $@-t; \
false; \
else \
rm -f $@-t; \
fi
imprimatur-writemes:
@files=`grep -c '^@c imprimatur-ignore' $(imprimatur_INPUT) | sed -n 's/:0$$//p'`; \
test -n "$$files" && grep -Hn '^[ \t]*@WRITEME' $$files > $@-t; \
if [ -s $@-t ]; then \
echo "Empty nodes:"; \
cat $@-t; \
rm $@-t; \
false;\
else \
rm $@-t; \
fi
imprimatur-empty-nodes:
@awk -f $(top_srcdir)/$(IMPRIMATUR_MODULE_DIR)/emptynodes.awk \
-v scriptname=$(top_srcdir)/$(IMPRIMATUR_MODULE_DIR)/emptynodes.awk \
-v makeinfoflags="$(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS)" \
$(info_TEXINFOS)
imprimatur-unrevised:
@files=`grep -c '^@c imprimatur-ignore' $(imprimatur_INPUT) | sed -n 's/:0$$//p'`; \
grep -Hn '^[ \t]*@UNREVISED' $$files > $@-t; \
if [ -s $@-t ]; then \
echo "Unrevised nodes:"; \
cat $@-t; \
rm $@-t; \
false;\
else \
rm $@-t; \
fi
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@imprimatur-check-sentence-spacing:
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ @if grep -q '\. [@A-Z]' $(imprimatur_INPUT); then \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ echo >&2 "Sources contain double-space sentence separators."; \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ echo >&2 "Run make imprimatur-fix-sentence-spacing to fix."; \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ fi
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@imprimatur-fix-sentence-spacing:
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ @for file in $(imprimatur_INPUT); \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ do \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ if grep -q '\. [@A-Z]' $$file; then \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ mv $$file $${file}~; \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ sed -r 's/\. ([@A-Z])/. \1/g' $${file}~ > $$file; \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ fi; \
@IMPRIMATUR_COND_FRENCHSPACING_TRUE@ done
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@imprimatur-check-sentence-spacing:
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ @if grep -q '\. [@A-Z]' $(imprimatur_INPUT); then \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ echo >&2 "Sources contain single-space sentence separators."; \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ echo >&2 "Run make imprimatur-fix-sentence-spacing to fix."; \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ fi
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@imprimatur-fix-sentence-spacing:
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ @for file in $(imprimatur_INPUT); \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ do \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ if grep -q '\. [@A-Z]' $$file; then \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ mv $$file $${file}~; \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ sed -r 's/\. ([@A-Z])/. \1/g' $${file}~ > $$file; \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ fi; \
@IMPRIMATUR_COND_FRENCHSPACING_FALSE@ done
imprimatur-basic-checks: imprimatur-format imprimatur-check-sentence-spacing \
imprimatur-refs imprimatur-fixmes \
imprimatur-empty-nodes imprimatur-unrevised
imprimatur-master-menu:
@emacs -batch -l $(top_srcdir)/$(IMPRIMATUR_MODULE_DIR)/mastermenu.el \
-f make-master-menu $(info_TEXINFOS)
imprimatur-untabify:
@emacs -batch -l $(top_srcdir)/$(IMPRIMATUR_MODULE_DIR)/untabify.el \
$(imprimatur_INPUT)
imprimatur-final: imprimatur-untabify imprimatur-master-menu
# Checking
check-options: check-mailfromd-options check-calloutd-options check-mfdbtool-options
# FIXME: Options log-facility and mailer are added by the corresponding
# mailutils capabilities. The check is unable to trace that.
check-mailfromd-options:
@$(CHECK_DOCS) "mailfromd options" \
'/mu_option mailfromd_options\[\] = /,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg;/mu_option srv_options\[\] = /,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg' \
's/@opindex *\([^@,]*\), --.*mailfromd option.*/\1/p' \
$(top_srcdir)/src/main.c $(top_srcdir)/src/srvcfg.c -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
# FIXME: Same here
check-calloutd-options:
@$(CHECK_DOCS) "calloutd options" \
'/mu_option calloutd_options\[\] = /,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg;/mu_option srv_options\[\] = /,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg' \
's/@opindex *\([^@,]*\), --.*calloutd option.*/\1/p' \
$(top_srcdir)/src/calloutd.c $(top_srcdir)/src/srvcfg.c -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-mfdbtool-options:
@$(CHECK_DOCS) "mfdbtool options" \
'/mu_option mfdbtool_options\[\] = /,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg' \
's/@opindex *\([^@,]*\), --.*mfdbtool option.*/\1/p' \
$(top_srcdir)/src/mfdbtool.c -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-config:
@$(CHECK_DOCS) 'configuration statements' \
'/mf_cfg_param\[\] *= *{/,/^}/s/[ \t]*{ *"\([a-zA-Z_][^,"]*\)".*/\1/pg;/srv_cfg_param\[\] *= *{/,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg' \
's/@deffn {Mailfromd Conf} *\([^@, ]*\).*/\1/p' \
$(top_srcdir)/src/main.c $(top_srcdir)/src/srvcfg.c $(top_srcdir)/lib/dbcfg.c -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-sub-config:
@list=`sed -n '/mf_cfg_param\[\] *= *{/,/^}/{s/[ \t]*{ *"\([^,"]*\)", *mu_cfg_section *,.*/\1/pg}' $(top_srcdir)/src/main.c | sed /^runtime$$/d`; \
for ident in $$list; do \
cident=`echo $$ident | tr '-' '_'`; \
$(CHECK_DOCS) "$$ident configuration statements" \
"/$${cident}_section_param"'\[\] *= *{/,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg' \
"s/@deffn {$${ident}}"' *\([^@,]*\).*/\1/p' \
$(top_srcdir)/src/main.c $(top_srcdir)/lib/dbcfg.c -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS); \
done
# FIXME: This rule does not take into account possible subsections.
# None of the *.bi sources declares them anyway, so it's OK for now.
check-runtime-config:
@$(CHECK_DOCS) 'MFL runtime configuration statements' \
'/struct *mu_cfg_param *[a-zA-Z_][a-zA-Z0-9_]*_cfg_param\[\] *= *{/,/^}/s/[ \t]*{ *"\([^,"]*\)".*/\1/pg' \
's/@deffn {runtime} *\([^@, ]*\).*/\1/p' \
$(top_srcdir)/src/builtin/*.bi -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-builtins:
@$(CHECK_DOCS) builtins \
'/MF_DEFUN/{s/[ \t]*MF_DEFUN *(\([a-zA-Z_][a-zA-Z0-9_]*\),.*/\1/p;s/[ \t]*MF_DEFUN_VARARGS\(_NO_PROM\)\? *(\([a-zA-Z_][a-zA-Z0-9_]*\),.*/\2/p;s/[ \t]*MF_DEFUN_CTYPE *(\([a-zA-Z_][a-zA-Z0-9_]*\))/\1/p}'\
's/@deftypefnx\{0,1\} {Built-in Function} *[^ ][^ ]* *\([^ ]*\).*/\1/p' \
$(top_srcdir)/src/builtin/*.bi -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-mflib:
@$(CHECK_DOCS) "library functions" \
'/^[ \t]*func[ \t][ \t]*__/b;/^[ \t]*func/s/[ \t]*func[ \t][ \t]*\(.[^ \t(]*\).*/\1/p' \
's/@deftypefn {Library Function} *[^ ][^ ]* *\([^ ]*\).*/\1/p' \
$(top_srcdir)/mflib/*.mf -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-exceptions:
@$(CHECK_DOCS) exceptions \
'/dclex e_/s/dclex \(e_[^ ]*\)/\1/p' \
's/@cindex \(e_[^,]*\), exception type/\1/p' \
$(top_srcdir)/mflib/status.mf -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
check-pragmas:
@$(CHECK_DOCS) pragmas \
'/MF_PRAGMA(/s/MF_PRAGMA(\(.[^,]*\),.*/\1/p;/install_pragma/s/install_pragma("\(.*\)".*/\1/p' \
's/@subsection Pragma \(.*\)/\1/p' \
$(top_srcdir)/src/builtin/*.bi $(top_srcdir)/src/gram.y -- \
$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
$(info_TEXINFOS)
all-check-docs: imprimatur-basic-checks check-options check-pragmas \
check-config check-sub-config check-runtime-config \
check-builtins check-mflib check-exceptions
check-docs:
@$(MAKE) -k all-check-docs
#
master-menu: imprimatur-master-menu
untabify: imprimatur-untabify
final: imprimatur-final
.PHONY: manual
manual:
TEXINPUTS=$(srcdir):$(top_srcdir)/build-aux:$(TEXINPUTS) \
MAKEINFO="$(MAKEINFO) $(MAKEINFOFLAGS) $(AM_MAKEINFOFLAGS)" \
TEXI2DVI="$(TEXI2DVI)" \
$(GENDOCS) $(PACKAGE) '$(PACKAGE_NAME) manual'
manual.tar.bz2: manual
tar cfj manual.tar.bz2 manual
man-tar: manual.tar.bz2
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: